1 | # Modified from Hardy's example-preseed.txt. |
---|
2 | |
---|
3 | # This is mildly parsed by the install script. |
---|
4 | |
---|
5 | # Locale and keyboard are set by PXELINUX via kernel options. |
---|
6 | |
---|
7 | ############################################################################## |
---|
8 | ############################################################################## |
---|
9 | # Stuff which looks bogus for custom installs is current split out up here |
---|
10 | # for later separation. |
---|
11 | d-i pkgsel/update-policy select none |
---|
12 | |
---|
13 | ### Network configuration |
---|
14 | # netcfg will choose an interface that has link if possible. This makes it |
---|
15 | # skip displaying a list if there is more than one interface. |
---|
16 | d-i netcfg/choose_interface select auto |
---|
17 | |
---|
18 | ############################################################################## |
---|
19 | ############################################################################## |
---|
20 | |
---|
21 | # Any hostname and domain names assigned from dhcp take precedence over |
---|
22 | # values set here. However, setting the values still prevents the questions |
---|
23 | # from being shown, even if values come from dhcp. |
---|
24 | # d-i netcfg/get_hostname string unassigned-hostname |
---|
25 | # d-i netcfg/get_domain string unassigned-domain |
---|
26 | |
---|
27 | # Disable that annoying WEP key dialog. |
---|
28 | # d-i netcfg/wireless_wep string |
---|
29 | # The wacky dhcp hostname that some ISPs use as a password of sorts. |
---|
30 | # d-i netcfg/dhcp_hostname string radish |
---|
31 | |
---|
32 | ### Partitioning |
---|
33 | # Use the whole disk. Any disk. |
---|
34 | # No, use the first disk (via a shell script that also does sanity checking |
---|
35 | d-i partman/early_command string sh /debathena/check-disks.sh |
---|
36 | # We could also do this to just pick the first disk |
---|
37 | #d-i partman/early_command string debconf-set partman-auto/disk "$(list-devices disk | head -n1)" |
---|
38 | |
---|
39 | # The presently available methods are: "regular", "lvm" and "crypto" |
---|
40 | d-i partman-auto/method string lvm |
---|
41 | |
---|
42 | # Stomp old LVM config. |
---|
43 | d-i partman-auto/purge_lvm_from_device boolean true |
---|
44 | # Don't confirm writing LVM. |
---|
45 | d-i partman-lvm/confirm boolean true |
---|
46 | # ...and for overwriting the same thing from a previous install: |
---|
47 | d-i partman-lvm/device_remove_lvm boolean true |
---|
48 | # ...and for overwriting a completely zeroed disk: |
---|
49 | # This doesn't work when preseeded. It does work manually. Yay. |
---|
50 | # LP:154086 covers the basic problem, though not the nonpreseedability. |
---|
51 | # Except now it does work? |
---|
52 | d-i partman-lvm/confirm_nooverwrite boolean true |
---|
53 | |
---|
54 | # You can choose from any of the predefined partitioning recipes. |
---|
55 | # atomic: All files in one partition (recommended for new users) |
---|
56 | # home: Separate /home partition |
---|
57 | # multi: Separate /home, /usr, /var, and /tmp partitions |
---|
58 | # small_disk (alpha architecture only): |
---|
59 | # Small-disk (< 1GB) partitioning scheme |
---|
60 | # d-i partman-auto/choose_recipe select atomic |
---|
61 | |
---|
62 | # Or provide a recipe of your own... |
---|
63 | # The recipe format is documented in the file devel/partman-auto-recipe.txt. |
---|
64 | # If you have a way to get a recipe file into the d-i environment, you can |
---|
65 | # just point at it. |
---|
66 | d-i partman-auto/expert_recipe_file string /debathena/lvm-cluster-machine.partman |
---|
67 | # This is completely undocumented. Sigh. |
---|
68 | d-i partman-auto-lvm/new_vg_name string athena |
---|
69 | # As reported in Trac #253 |
---|
70 | d-i partman-auto-lvm/guided_size string max |
---|
71 | # Don't punt for no-method filesystems. Another undocumented option. |
---|
72 | d-i partman-basicmethods/method_only boolean false |
---|
73 | # It's not 1999, GRUB is capable of booting LVM: |
---|
74 | d-i partman-auto-lvm/no_boot boolean true |
---|
75 | |
---|
76 | # This makes partman automatically partition without confirmation, provided |
---|
77 | # that you told it what to do using one of the methods above. |
---|
78 | d-i partman/confirm_write_new_label boolean true |
---|
79 | d-i partman/choose_partition select finish |
---|
80 | d-i partman/confirm boolean true |
---|
81 | d-i partman/confirm_nooverwrite boolean true |
---|
82 | |
---|
83 | ### Base system installation |
---|
84 | # Select the initramfs generator used to generate the initrd for 2.6 kernels. |
---|
85 | #d-i base-installer/kernel/linux/initramfs-generators string yaird |
---|
86 | |
---|
87 | # The kernel image (meta) package to be installed; "none" can be used if no |
---|
88 | # kernel is to be installed. |
---|
89 | d-i base-installer/kernel/image linux-generic |
---|
90 | |
---|
91 | ### Account setup |
---|
92 | # No user account; root account with standard password: |
---|
93 | d-i passwd/make-user boolean false |
---|
94 | d-i passwd/root-login boolean true |
---|
95 | d-i passwd/root-password password profroot |
---|
96 | d-i passwd/root-password-again password profroot |
---|
97 | |
---|
98 | # Normal user's password, either in clear text |
---|
99 | #d-i passwd/user-password password insecure |
---|
100 | #d-i passwd/user-password-again password insecure |
---|
101 | # or encrypted using an MD5 hash. |
---|
102 | #d-i passwd/user-password-crypted password [MD5 hash] |
---|
103 | # Create the first user with the specified UID instead of the default. |
---|
104 | #d-i passwd/user-uid string 1010 |
---|
105 | |
---|
106 | # The user account will be added to some standard initial groups. To |
---|
107 | # override that, use this. |
---|
108 | #d-i passwd/user-default-groups string audio cdrom video |
---|
109 | |
---|
110 | ### Apt setup |
---|
111 | # You can choose to install restricted and universe software, or to install |
---|
112 | # software from the backports repository. |
---|
113 | d-i apt-setup/restricted boolean true |
---|
114 | d-i apt-setup/universe boolean true |
---|
115 | # Stop configuring backports (originally needed for Jaunty on the 755s) |
---|
116 | # d-i apt-setup/backports boolean true |
---|
117 | # Uncomment this if you don't want to use a network mirror. |
---|
118 | #d-i apt-setup/use_mirror boolean false |
---|
119 | # Select which update services to use; define the mirrors to be used. |
---|
120 | # Values shown below are the normal defaults. |
---|
121 | #d-i apt-setup/services-select multiselect security |
---|
122 | #d-i apt-setup/security_host string security.ubuntu.com |
---|
123 | #d-i apt-setup/security_path string /ubuntu |
---|
124 | d-i apt-setup/country string US |
---|
125 | # Actual mirror host now taken care of (semi-secretly) by the installer script. |
---|
126 | # d-i apt-setup/hostname string mirrors.mit.edu |
---|
127 | d-i apt-setup/directory string /ubuntu |
---|
128 | d-i apt-setup/country US |
---|
129 | |
---|
130 | |
---|
131 | # Additional repositories, local[0-9] available |
---|
132 | #d-i apt-setup/local0/repository string \ |
---|
133 | # http://local.server/ubuntu hardy main |
---|
134 | #d-i apt-setup/local0/comment string local server |
---|
135 | # Enable deb-src lines |
---|
136 | #d-i apt-setup/local0/source boolean true |
---|
137 | # URL to the public key of the local repository; you must provide a key or |
---|
138 | # apt will complain about the unauthenticated repository and so the |
---|
139 | # sources.list line will be left commented out |
---|
140 | #d-i apt-setup/local0/key string http://local.server/key |
---|
141 | |
---|
142 | # By default the installer requires that repositories be authenticated |
---|
143 | # using a known gpg key. This setting can be used to disable that |
---|
144 | # authentication. Warning: Insecure, not recommended. |
---|
145 | #d-i debian-installer/allow_unauthenticated string true |
---|
146 | |
---|
147 | ### Package selection |
---|
148 | tasksel tasksel/first multiselect standard, ubuntu-desktop |
---|
149 | #tasksel tasksel/first multiselect standard, lamp-server |
---|
150 | #tasksel tasksel/first multiselect standard, kubuntu-desktop |
---|
151 | |
---|
152 | # Individual additional packages to install |
---|
153 | #d-i pkgsel/include string openssh-server build-essential |
---|
154 | |
---|
155 | # Language pack selection |
---|
156 | #d-i pkgsel/language-packs multiselect de, en, zh |
---|
157 | |
---|
158 | # Some versions of the installer can report back on what software you have |
---|
159 | # installed, and what software you use. The default is not to report back, |
---|
160 | # but sending reports helps the project determine what software is most |
---|
161 | # popular and include it on CDs. |
---|
162 | #popularity-contest popularity-contest/participate boolean false |
---|
163 | |
---|
164 | ### Boot loader installation |
---|
165 | # Grub is the default boot loader (for x86). If you want lilo installed |
---|
166 | # instead, uncomment this: |
---|
167 | #d-i grub-installer/skip boolean true |
---|
168 | # To also skip installing lilo, and install no bootloader, uncomment this |
---|
169 | # too: |
---|
170 | #d-i lilo-installer/skip boolean true |
---|
171 | |
---|
172 | # This is fairly safe to set, it makes grub install automatically to the MBR |
---|
173 | # if no other operating system is detected on the machine. |
---|
174 | d-i grub-installer/only_debian boolean true |
---|
175 | |
---|
176 | # This one makes grub-installer install to the MBR if it also finds some other |
---|
177 | # OS, which is less safe as it might not be able to boot that other OS. |
---|
178 | d-i grub-installer/with_other_os boolean true |
---|
179 | |
---|
180 | # Alternatively, if you want to install to a location other than the mbr, |
---|
181 | # uncomment and edit these lines: |
---|
182 | #d-i grub-installer/only_debian boolean false |
---|
183 | #d-i grub-installer/with_other_os boolean false |
---|
184 | #d-i grub-installer/bootdev string (hd0,0) |
---|
185 | # To install grub to multiple disks: |
---|
186 | #d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0) |
---|
187 | |
---|
188 | # On systems where unauthorized users have access at boot time, you may want |
---|
189 | # to set a GRUB password, either in clear text |
---|
190 | #d-i grub-installer/password password insecure |
---|
191 | #d-i grub-installer/password-again password insecure |
---|
192 | # or encrypted using an MD5 hash. |
---|
193 | #d-i grub-installer/password-crypted password [MD5 hash] |
---|
194 | |
---|
195 | ### Finishing up the installation |
---|
196 | # Avoid that last message about the install being complete. |
---|
197 | d-i finish-install/reboot_in_progress note |
---|
198 | |
---|
199 | # This will prevent the installer from ejecting the CD during the reboot, |
---|
200 | # which is useful in some situations. |
---|
201 | #d-i cdrom-detect/eject boolean false |
---|
202 | |
---|
203 | # This is how to make the installer shutdown when finished, but not |
---|
204 | # reboot into the installed system. |
---|
205 | #d-i debian-installer/exit/halt boolean true |
---|
206 | |
---|
207 | ### X configuration |
---|
208 | # X can detect the right driver for some cards, but if you're preseeding, |
---|
209 | # you override whatever it chooses. Still, vesa will work most places. |
---|
210 | #xserver-xorg xserver-xorg/config/device/driver select vesa |
---|
211 | |
---|
212 | # A caveat with mouse autodetection is that if it fails, X will retry it |
---|
213 | # over and over. So if it's preseeded to be done, there is a possibility of |
---|
214 | # an infinite loop if the mouse is not autodetected. |
---|
215 | #xserver-xorg xserver-xorg/autodetect_mouse boolean true |
---|
216 | |
---|
217 | # Monitor autodetection is recommended. |
---|
218 | xserver-xorg xserver-xorg/autodetect_monitor boolean true |
---|
219 | # Uncomment if you have an LCD display. |
---|
220 | #xserver-xorg xserver-xorg/config/monitor/lcd boolean true |
---|
221 | # X has three configuration paths for the monitor. Here's how to preseed |
---|
222 | # the "medium" path, which is always available. The "simple" path may not |
---|
223 | # be available, and the "advanced" path asks too many questions. |
---|
224 | xserver-xorg xserver-xorg/config/monitor/selection-method select medium |
---|
225 | xserver-xorg xserver-xorg/config/monitor/mode-list select 1024x768 @ 60 Hz |
---|
226 | |
---|
227 | ### Preseeding other packages |
---|
228 | # Depending on what software you choose to install, or if things go wrong |
---|
229 | # during the installation process, it's possible that other questions may |
---|
230 | # be asked. You can preseed those too, of course. To get a list of every |
---|
231 | # possible question that could be asked during an install, do an |
---|
232 | # installation, and then run these commands: |
---|
233 | # debconf-get-selections --installer > file |
---|
234 | # debconf-get-selections >> file |
---|
235 | |
---|
236 | |
---|
237 | #### Advanced options |
---|
238 | ### Running custom commands during the installation |
---|
239 | # d-i preseeding is inherently not secure. Nothing in the installer checks |
---|
240 | # for attempts at buffer overflows or other exploits of the values of a |
---|
241 | # preconfiguration file like this one. Only use preconfiguration files from |
---|
242 | # trusted locations! To drive that home, and because it's generally useful, |
---|
243 | # here's a way to run any shell command you'd like inside the installer, |
---|
244 | # automatically. |
---|
245 | |
---|
246 | # This first command is run as early as possible, just after |
---|
247 | # preseeding is read. |
---|
248 | #d-i preseed/early_command string anna-install some-udeb |
---|