/* Emit RTL for the GNU C-Compiler expander. Copyright (C) 1987, 88, 92, 93, 94, 1995 Free Software Foundation, Inc. This file is part of GNU CC. GNU CC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Middle-to-low level generation of rtx code and insns. This file contains the functions `gen_rtx', `gen_reg_rtx' and `gen_label_rtx' that are the usual ways of creating rtl expressions for most purposes. It also has the functions for creating insns and linking them in the doubly-linked chain. The patterns of the insns are created by machine-dependent routines in insn-emit.c, which is generated automatically from the machine description. These routines use `gen_rtx' to make the individual rtx's of the pattern; what is machine dependent is the kind of rtx's they make and what arguments they use. */ #include "config.h" #ifdef __STDC__ #include #else #include #endif #include "rtl.h" #include "tree.h" #include "flags.h" #include "function.h" #include "expr.h" #include "regs.h" #include "insn-config.h" #include "real.h" #include "obstack.h" #include "bytecode.h" #include "machmode.h" #include "bc-opcode.h" #include "bc-typecd.h" #include "bc-optab.h" #include "bc-emit.h" #include /* Opcode names */ #ifdef BCDEBUG_PRINT_CODE char *opcode_name[] = { #include "bc-opname.h" "***END***" }; #endif /* Commonly used modes. */ enum machine_mode byte_mode; /* Mode whose width is BITS_PER_UNIT. */ enum machine_mode word_mode; /* Mode whose width is BITS_PER_WORD. */ enum machine_mode ptr_mode; /* Mode whose width is POINTER_SIZE. */ /* This is reset to LAST_VIRTUAL_REGISTER + 1 at the start of each function. After rtl generation, it is 1 plus the largest register number used. */ int reg_rtx_no = LAST_VIRTUAL_REGISTER + 1; /* This is *not* reset after each function. It gives each CODE_LABEL in the entire compilation a unique label number. */ static int label_num = 1; /* Lowest label number in current function. */ static int first_label_num; /* Highest label number in current function. Zero means use the value of label_num instead. This is nonzero only when belatedly compiling an inline function. */ static int last_label_num; /* Value label_num had when set_new_first_and_last_label_number was called. If label_num has not changed since then, last_label_num is valid. */ static int base_label_num; /* Nonzero means do not generate NOTEs for source line numbers. */ static int no_line_numbers; /* Commonly used rtx's, so that we only need space for one copy. These are initialized once for the entire compilation. All of these except perhaps the floating-point CONST_DOUBLEs are unique; no other rtx-object will be equal to any of these. */ rtx pc_rtx; /* (PC) */ rtx cc0_rtx; /* (CC0) */ rtx cc1_rtx; /* (CC1) (not actually used nowadays) */ rtx const0_rtx; /* (CONST_INT 0) */ rtx const1_rtx; /* (CONST_INT 1) */ rtx const2_rtx; /* (CONST_INT 2) */ rtx constm1_rtx; /* (CONST_INT -1) */ rtx const_true_rtx; /* (CONST_INT STORE_FLAG_VALUE) */ /* We record floating-point CONST_DOUBLEs in each floating-point mode for the values of 0, 1, and 2. For the integer entries and VOIDmode, we record a copy of const[012]_rtx. */ rtx const_tiny_rtx[3][(int) MAX_MACHINE_MODE]; REAL_VALUE_TYPE dconst0; REAL_VALUE_TYPE dconst1; REAL_VALUE_TYPE dconst2; REAL_VALUE_TYPE dconstm1; /* All references to the following fixed hard registers go through these unique rtl objects. On machines where the frame-pointer and arg-pointer are the same register, they use the same unique object. After register allocation, other rtl objects which used to be pseudo-regs may be clobbered to refer to the frame-pointer register. But references that were originally to the frame-pointer can be distinguished from the others because they contain frame_pointer_rtx. When to use frame_pointer_rtx and hard_frame_pointer_rtx is a little tricky: until register elimination has taken place hard_frame_pointer_rtx should be used if it is being set, and frame_pointer_rtx otherwise. After register elimination hard_frame_pointer_rtx should always be used. On machines where the two registers are same (most) then these are the same. In an inline procedure, the stack and frame pointer rtxs may not be used for anything else. */ rtx stack_pointer_rtx; /* (REG:Pmode STACK_POINTER_REGNUM) */ rtx frame_pointer_rtx; /* (REG:Pmode FRAME_POINTER_REGNUM) */ rtx hard_frame_pointer_rtx; /* (REG:Pmode HARD_FRAME_POINTER_REGNUM) */ rtx arg_pointer_rtx; /* (REG:Pmode ARG_POINTER_REGNUM) */ rtx struct_value_rtx; /* (REG:Pmode STRUCT_VALUE_REGNUM) */ rtx struct_value_incoming_rtx; /* (REG:Pmode STRUCT_VALUE_INCOMING_REGNUM) */ rtx static_chain_rtx; /* (REG:Pmode STATIC_CHAIN_REGNUM) */ rtx static_chain_incoming_rtx; /* (REG:Pmode STATIC_CHAIN_INCOMING_REGNUM) */ rtx pic_offset_table_rtx; /* (REG:Pmode PIC_OFFSET_TABLE_REGNUM) */ rtx virtual_incoming_args_rtx; /* (REG:Pmode VIRTUAL_INCOMING_ARGS_REGNUM) */ rtx virtual_stack_vars_rtx; /* (REG:Pmode VIRTUAL_STACK_VARS_REGNUM) */ rtx virtual_stack_dynamic_rtx; /* (REG:Pmode VIRTUAL_STACK_DYNAMIC_REGNUM) */ rtx virtual_outgoing_args_rtx; /* (REG:Pmode VIRTUAL_OUTGOING_ARGS_REGNUM) */ /* We make one copy of (const_int C) where C is in [- MAX_SAVED_CONST_INT, MAX_SAVED_CONST_INT] to save space during the compilation and simplify comparisons of integers. */ #define MAX_SAVED_CONST_INT 64 static rtx const_int_rtx[MAX_SAVED_CONST_INT * 2 + 1]; /* The ends of the doubly-linked chain of rtl for the current function. Both are reset to null at the start of rtl generation for the function. start_sequence saves both of these on `sequence_stack' along with `sequence_rtl_expr' and then starts a new, nested sequence of insns. */ static rtx first_insn = NULL; static rtx last_insn = NULL; /* RTL_EXPR within which the current sequence will be placed. Use to prevent reuse of any temporaries within the sequence until after the RTL_EXPR is emitted. */ tree sequence_rtl_expr = NULL; /* INSN_UID for next insn emitted. Reset to 1 for each function compiled. */ static int cur_insn_uid = 1; /* Line number and source file of the last line-number NOTE emitted. This is used to avoid generating duplicates. */ static int last_linenum = 0; static char *last_filename = 0; /* A vector indexed by pseudo reg number. The allocated length of this vector is regno_pointer_flag_length. Since this vector is needed during the expansion phase when the total number of registers in the function is not yet known, it is copied and made bigger when necessary. */ char *regno_pointer_flag; int regno_pointer_flag_length; /* Indexed by pseudo register number, gives the rtx for that pseudo. Allocated in parallel with regno_pointer_flag. */ rtx *regno_reg_rtx; /* Stack of pending (incomplete) sequences saved by `start_sequence'. Each element describes one pending sequence. The main insn-chain is saved in the last element of the chain, unless the chain is empty. */ struct sequence_stack *sequence_stack; /* start_sequence and gen_sequence can make a lot of rtx expressions which are shortly thrown away. We use two mechanisms to prevent this waste: First, we keep a list of the expressions used to represent the sequence stack in sequence_element_free_list. Second, for sizes up to 5 elements, we keep a SEQUENCE and its associated rtvec for use by gen_sequence. One entry for each size is sufficient because most cases are calls to gen_sequence followed by immediately emitting the SEQUENCE. Reuse is safe since emitting a sequence is destructive on the insn in it anyway and hence can't be redone. We do not bother to save this cached data over nested function calls. Instead, we just reinitialize them. */ #define SEQUENCE_RESULT_SIZE 5 static struct sequence_stack *sequence_element_free_list; static rtx sequence_result[SEQUENCE_RESULT_SIZE]; extern int rtx_equal_function_value_matters; /* Filename and line number of last line-number note, whether we actually emitted it or not. */ extern char *emit_filename; extern int emit_lineno; rtx change_address (); void init_emit (); extern struct obstack *rtl_obstack; extern int stack_depth; extern int max_stack_depth; /* rtx gen_rtx (code, mode, [element1, ..., elementn]) ** ** This routine generates an RTX of the size specified by ** , which is an RTX code. The RTX structure is initialized ** from the arguments through , which are ** interpreted according to the specific RTX type's format. The ** special machine mode associated with the rtx (if any) is specified ** in . ** ** gen_rtx can be invoked in a way which resembles the lisp-like ** rtx it will generate. For example, the following rtx structure: ** ** (plus:QI (mem:QI (reg:SI 1)) ** (mem:QI (plusw:SI (reg:SI 2) (reg:SI 3)))) ** ** ...would be generated by the following C code: ** ** gen_rtx (PLUS, QImode, ** gen_rtx (MEM, QImode, ** gen_rtx (REG, SImode, 1)), ** gen_rtx (MEM, QImode, ** gen_rtx (PLUS, SImode, ** gen_rtx (REG, SImode, 2), ** gen_rtx (REG, SImode, 3)))), */ /*VARARGS2*/ rtx gen_rtx VPROTO((enum rtx_code code, enum machine_mode mode, ...)) { #ifndef __STDC__ enum rtx_code code; enum machine_mode mode; #endif va_list p; register int i; /* Array indices... */ register char *fmt; /* Current rtx's format... */ register rtx rt_val; /* RTX to return to caller... */ VA_START (p, mode); #ifndef __STDC__ code = va_arg (p, enum rtx_code); mode = va_arg (p, enum machine_mode); #endif if (code == CONST_INT) { HOST_WIDE_INT arg = va_arg (p, HOST_WIDE_INT); if (arg >= - MAX_SAVED_CONST_INT && arg <= MAX_SAVED_CONST_INT) return const_int_rtx[arg + MAX_SAVED_CONST_INT]; if (const_true_rtx && arg == STORE_FLAG_VALUE) return const_true_rtx; rt_val = rtx_alloc (code); INTVAL (rt_val) = arg; } else if (code == REG) { int regno = va_arg (p, int); /* In case the MD file explicitly references the frame pointer, have all such references point to the same frame pointer. This is used during frame pointer elimination to distinguish the explicit references to these registers from pseudos that happened to be assigned to them. If we have eliminated the frame pointer or arg pointer, we will be using it as a normal register, for example as a spill register. In such cases, we might be accessing it in a mode that is not Pmode and therefore cannot use the pre-allocated rtx. Also don't do this when we are making new REGs in reload, since we don't want to get confused with the real pointers. */ if (frame_pointer_rtx && regno == FRAME_POINTER_REGNUM && mode == Pmode && ! reload_in_progress) return frame_pointer_rtx; #if FRAME_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM if (hard_frame_pointer_rtx && regno == HARD_FRAME_POINTER_REGNUM && mode == Pmode && ! reload_in_progress) return hard_frame_pointer_rtx; #endif #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM && HARD_FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM if (arg_pointer_rtx && regno == ARG_POINTER_REGNUM && mode == Pmode && ! reload_in_progress) return arg_pointer_rtx; #endif if (stack_pointer_rtx && regno == STACK_POINTER_REGNUM && mode == Pmode && ! reload_in_progress) return stack_pointer_rtx; else { rt_val = rtx_alloc (code); rt_val->mode = mode; REGNO (rt_val) = regno; return rt_val; } } else { rt_val = rtx_alloc (code); /* Allocate the storage space. */ rt_val->mode = mode; /* Store the machine mode... */ fmt = GET_RTX_FORMAT (code); /* Find the right format... */ for (i = 0; i < GET_RTX_LENGTH (code); i++) { switch (*fmt++) { case '0': /* Unused field. */ break; case 'i': /* An integer? */ XINT (rt_val, i) = va_arg (p, int); break; case 'w': /* A wide integer? */ XWINT (rt_val, i) = va_arg (p, HOST_WIDE_INT); break; case 's': /* A string? */ XSTR (rt_val, i) = va_arg (p, char *); break; case 'e': /* An expression? */ case 'u': /* An insn? Same except when printing. */ XEXP (rt_val, i) = va_arg (p, rtx); break; case 'E': /* An RTX vector? */ XVEC (rt_val, i) = va_arg (p, rtvec); break; default: abort (); } } } va_end (p); return rt_val; /* Return the new RTX... */ } /* gen_rtvec (n, [rt1, ..., rtn]) ** ** This routine creates an rtvec and stores within it the ** pointers to rtx's which are its arguments. */ /*VARARGS1*/ rtvec gen_rtvec VPROTO((int n, ...)) { #ifndef __STDC__ int n; #endif int i; va_list p; rtx *vector; VA_START (p, n); #ifndef __STDC__ n = va_arg (p, int); #endif if (n == 0) return NULL_RTVEC; /* Don't allocate an empty rtvec... */ vector = (rtx *) alloca (n * sizeof (rtx)); for (i = 0; i < n; i++) vector[i] = va_arg (p, rtx); va_end (p); return gen_rtvec_v (n, vector); } rtvec gen_rtvec_v (n, argp) int n; rtx *argp; { register int i; register rtvec rt_val; if (n == 0) return NULL_RTVEC; /* Don't allocate an empty rtvec... */ rt_val = rtvec_alloc (n); /* Allocate an rtvec... */ for (i = 0; i < n; i++) rt_val->elem[i].rtx = *argp++; return rt_val; } /* Generate a REG rtx for a new pseudo register of mode MODE. This pseudo is assigned the next sequential register number. */ rtx gen_reg_rtx (mode) enum machine_mode mode; { register rtx val; /* Don't let anything called by or after reload create new registers (actually, registers can't be created after flow, but this is a good approximation). */ if (reload_in_progress || reload_completed) abort (); if (GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT || GET_MODE_CLASS (mode) == MODE_COMPLEX_INT) { /* For complex modes, don't make a single pseudo. Instead, make a CONCAT of two pseudos. This allows noncontiguous allocation of the real and imaginary parts, which makes much better code. Besides, allocating DCmode pseudos overstrains reload on some machines like the 386. */ rtx realpart, imagpart; int size = GET_MODE_UNIT_SIZE (mode); enum machine_mode partmode = mode_for_size (size * BITS_PER_UNIT, (GET_MODE_CLASS (mode) == MODE_COMPLEX_FLOAT ? MODE_FLOAT : MODE_INT), 0); realpart = gen_reg_rtx (partmode); imagpart = gen_reg_rtx (partmode); return gen_rtx (CONCAT, mode, realpart, imagpart); } /* Make sure regno_pointer_flag and regno_reg_rtx are large enough to have an element for this pseudo reg number. */ if (reg_rtx_no == regno_pointer_flag_length) { rtx *new1; char *new = (char *) oballoc (regno_pointer_flag_length * 2); bcopy (regno_pointer_flag, new, regno_pointer_flag_length); bzero (&new[regno_pointer_flag_length], regno_pointer_flag_length); regno_pointer_flag = new; new1 = (rtx *) oballoc (regno_pointer_flag_length * 2 * sizeof (rtx)); bcopy ((char *) regno_reg_rtx, (char *) new1, regno_pointer_flag_length * sizeof (rtx)); bzero ((char *) &new1[regno_pointer_flag_length], regno_pointer_flag_length * sizeof (rtx)); regno_reg_rtx = new1; regno_pointer_flag_length *= 2; } val = gen_rtx (REG, mode, reg_rtx_no); regno_reg_rtx[reg_rtx_no++] = val; return val; } /* Identify REG as a probable pointer register. */ void mark_reg_pointer (reg) rtx reg; { REGNO_POINTER_FLAG (REGNO (reg)) = 1; } /* Return 1 plus largest pseudo reg number used in the current function. */ int max_reg_num () { return reg_rtx_no; } /* Return 1 + the largest label number used so far in the current function. */ int max_label_num () { if (last_label_num && label_num == base_label_num) return last_label_num; return label_num; } /* Return first label number used in this function (if any were used). */ int get_first_label_num () { return first_label_num; } /* Return a value representing some low-order bits of X, where the number of low-order bits is given by MODE. Note that no conversion is done between floating-point and fixed-point values, rather, the bit representation is returned. This function handles the cases in common between gen_lowpart, below, and two variants in cse.c and combine.c. These are the cases that can be safely handled at all points in the compilation. If this is not a case we can handle, return 0. */ rtx gen_lowpart_common (mode, x) enum machine_mode mode; register rtx x; { int word = 0; if (GET_MODE (x) == mode) return x; /* MODE must occupy no more words than the mode of X. */ if (GET_MODE (x) != VOIDmode && ((GET_MODE_SIZE (mode) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD > ((GET_MODE_SIZE (GET_MODE (x)) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD))) return 0; if (WORDS_BIG_ENDIAN && GET_MODE_SIZE (GET_MODE (x)) > UNITS_PER_WORD) word = ((GET_MODE_SIZE (GET_MODE (x)) - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD)) / UNITS_PER_WORD); if ((GET_CODE (x) == ZERO_EXTEND || GET_CODE (x) == SIGN_EXTEND) && (GET_MODE_CLASS (mode) == MODE_INT || GET_MODE_CLASS (mode) == MODE_PARTIAL_INT)) { /* If we are getting the low-order part of something that has been sign- or zero-extended, we can either just use the object being extended or make a narrower extension. If we want an even smaller piece than the size of the object being extended, call ourselves recursively. This case is used mostly by combine and cse. */ if (GET_MODE (XEXP (x, 0)) == mode) return XEXP (x, 0); else if (GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (XEXP (x, 0)))) return gen_lowpart_common (mode, XEXP (x, 0)); else if (GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (x))) return gen_rtx (GET_CODE (x), mode, XEXP (x, 0)); } else if (GET_CODE (x) == SUBREG && (GET_MODE_SIZE (mode) <= UNITS_PER_WORD || GET_MODE_SIZE (mode) == GET_MODE_UNIT_SIZE (GET_MODE (x)))) return (GET_MODE (SUBREG_REG (x)) == mode && SUBREG_WORD (x) == 0 ? SUBREG_REG (x) : gen_rtx (SUBREG, mode, SUBREG_REG (x), SUBREG_WORD (x))); else if (GET_CODE (x) == REG) { /* If the register is not valid for MODE, return 0. If we don't do this, there is no way to fix up the resulting REG later. But we do do this if the current REG is not valid for its mode. This latter is a kludge, but is required due to the way that parameters are passed on some machines, most notably Sparc. */ if (REGNO (x) < FIRST_PSEUDO_REGISTER && ! HARD_REGNO_MODE_OK (REGNO (x) + word, mode) && HARD_REGNO_MODE_OK (REGNO (x), GET_MODE (x))) return 0; else if (REGNO (x) < FIRST_PSEUDO_REGISTER /* integrate.c can't handle parts of a return value register. */ && (! REG_FUNCTION_VALUE_P (x) || ! rtx_equal_function_value_matters) /* We want to keep the stack, frame, and arg pointers special. */ && x != frame_pointer_rtx #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM && x != arg_pointer_rtx #endif && x != stack_pointer_rtx) return gen_rtx (REG, mode, REGNO (x) + word); else return gen_rtx (SUBREG, mode, x, word); } /* If X is a CONST_INT or a CONST_DOUBLE, extract the appropriate bits from the low-order part of the constant. */ else if ((GET_MODE_CLASS (mode) == MODE_INT || GET_MODE_CLASS (mode) == MODE_PARTIAL_INT) && GET_MODE (x) == VOIDmode && (GET_CODE (x) == CONST_INT || GET_CODE (x) == CONST_DOUBLE)) { /* If MODE is twice the host word size, X is already the desired representation. Otherwise, if MODE is wider than a word, we can't do this. If MODE is exactly a word, return just one CONST_INT. If MODE is smaller than a word, clear the bits that don't belong in our mode, unless they and our sign bit are all one. So we get either a reasonable negative value or a reasonable unsigned value for this mode. */ if (GET_MODE_BITSIZE (mode) >= 2 * HOST_BITS_PER_WIDE_INT) return x; else if (GET_MODE_BITSIZE (mode) > HOST_BITS_PER_WIDE_INT) return 0; else if (GET_MODE_BITSIZE (mode) == HOST_BITS_PER_WIDE_INT) return (GET_CODE (x) == CONST_INT ? x : GEN_INT (CONST_DOUBLE_LOW (x))); else { /* MODE must be narrower than HOST_BITS_PER_INT. */ int width = GET_MODE_BITSIZE (mode); HOST_WIDE_INT val = (GET_CODE (x) == CONST_INT ? INTVAL (x) : CONST_DOUBLE_LOW (x)); if (((val & ((HOST_WIDE_INT) (-1) << (width - 1))) != ((HOST_WIDE_INT) (-1) << (width - 1)))) val &= ((HOST_WIDE_INT) 1 << width) - 1; return (GET_CODE (x) == CONST_INT && INTVAL (x) == val ? x : GEN_INT (val)); } } /* If X is an integral constant but we want it in floating-point, it must be the case that we have a union of an integer and a floating-point value. If the machine-parameters allow it, simulate that union here and return the result. The two-word and single-word cases are different. */ else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT && HOST_BITS_PER_WIDE_INT == BITS_PER_WORD) || flag_pretend_float) && GET_MODE_CLASS (mode) == MODE_FLOAT && GET_MODE_SIZE (mode) == UNITS_PER_WORD && GET_CODE (x) == CONST_INT && sizeof (float) * HOST_BITS_PER_CHAR == HOST_BITS_PER_WIDE_INT) #ifdef REAL_ARITHMETIC { REAL_VALUE_TYPE r; HOST_WIDE_INT i; i = INTVAL (x); r = REAL_VALUE_FROM_TARGET_SINGLE (i); return CONST_DOUBLE_FROM_REAL_VALUE (r, mode); } #else { union {HOST_WIDE_INT i; float d; } u; u.i = INTVAL (x); return CONST_DOUBLE_FROM_REAL_VALUE (u.d, mode); } #endif else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT && HOST_BITS_PER_WIDE_INT == BITS_PER_WORD) || flag_pretend_float) && GET_MODE_CLASS (mode) == MODE_FLOAT && GET_MODE_SIZE (mode) == 2 * UNITS_PER_WORD && (GET_CODE (x) == CONST_INT || GET_CODE (x) == CONST_DOUBLE) && GET_MODE (x) == VOIDmode && (sizeof (double) * HOST_BITS_PER_CHAR == 2 * HOST_BITS_PER_WIDE_INT)) #ifdef REAL_ARITHMETIC { REAL_VALUE_TYPE r; HOST_WIDE_INT i[2]; HOST_WIDE_INT low, high; if (GET_CODE (x) == CONST_INT) low = INTVAL (x), high = low >> (HOST_BITS_PER_WIDE_INT -1); else low = CONST_DOUBLE_LOW (x), high = CONST_DOUBLE_HIGH (x); /* REAL_VALUE_TARGET_DOUBLE takes the addressing order of the target machine. */ if (WORDS_BIG_ENDIAN) i[0] = high, i[1] = low; else i[0] = low, i[1] = high; r = REAL_VALUE_FROM_TARGET_DOUBLE (i); return CONST_DOUBLE_FROM_REAL_VALUE (r, mode); } #else { union {HOST_WIDE_INT i[2]; double d; } u; HOST_WIDE_INT low, high; if (GET_CODE (x) == CONST_INT) low = INTVAL (x), high = low >> (HOST_BITS_PER_WIDE_INT -1); else low = CONST_DOUBLE_LOW (x), high = CONST_DOUBLE_HIGH (x); #ifdef HOST_WORDS_BIG_ENDIAN u.i[0] = high, u.i[1] = low; #else u.i[0] = low, u.i[1] = high; #endif return CONST_DOUBLE_FROM_REAL_VALUE (u.d, mode); } #endif /* Similarly, if this is converting a floating-point value into a single-word integer. Only do this is the host and target parameters are compatible. */ else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT && HOST_BITS_PER_WIDE_INT == BITS_PER_WORD) || flag_pretend_float) && (GET_MODE_CLASS (mode) == MODE_INT || GET_MODE_CLASS (mode) == MODE_PARTIAL_INT) && GET_CODE (x) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT && GET_MODE_BITSIZE (mode) == BITS_PER_WORD) return operand_subword (x, 0, 0, GET_MODE (x)); /* Similarly, if this is converting a floating-point value into a two-word integer, we can do this one word at a time and make an integer. Only do this is the host and target parameters are compatible. */ else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT && HOST_BITS_PER_WIDE_INT == BITS_PER_WORD) || flag_pretend_float) && (GET_MODE_CLASS (mode) == MODE_INT || GET_MODE_CLASS (mode) == MODE_PARTIAL_INT) && GET_CODE (x) == CONST_DOUBLE && GET_MODE_CLASS (GET_MODE (x)) == MODE_FLOAT && GET_MODE_BITSIZE (mode) == 2 * BITS_PER_WORD) { rtx lowpart = operand_subword (x, WORDS_BIG_ENDIAN, 0, GET_MODE (x)); rtx highpart = operand_subword (x, ! WORDS_BIG_ENDIAN, 0, GET_MODE (x)); if (lowpart && GET_CODE (lowpart) == CONST_INT && highpart && GET_CODE (highpart) == CONST_INT) return immed_double_const (INTVAL (lowpart), INTVAL (highpart), mode); } /* Otherwise, we can't do this. */ return 0; } /* Return the real part (which has mode MODE) of a complex value X. This always comes at the low address in memory. */ rtx gen_realpart (mode, x) enum machine_mode mode; register rtx x; { if (GET_CODE (x) == CONCAT && GET_MODE (XEXP (x, 0)) == mode) return XEXP (x, 0); else if (WORDS_BIG_ENDIAN) return gen_highpart (mode, x); else return gen_lowpart (mode, x); } /* Return the imaginary part (which has mode MODE) of a complex value X. This always comes at the high address in memory. */ rtx gen_imagpart (mode, x) enum machine_mode mode; register rtx x; { if (GET_CODE (x) == CONCAT && GET_MODE (XEXP (x, 0)) == mode) return XEXP (x, 1); else if (WORDS_BIG_ENDIAN) return gen_lowpart (mode, x); else return gen_highpart (mode, x); } /* Return 1 iff X, assumed to be a SUBREG, refers to the real part of the complex value in its containing reg. Complex values are always stored with the real part in the first word, regardless of WORDS_BIG_ENDIAN. */ int subreg_realpart_p (x) rtx x; { if (GET_CODE (x) != SUBREG) abort (); return SUBREG_WORD (x) == 0; } /* Assuming that X is an rtx (e.g., MEM, REG or SUBREG) for a value, return an rtx (MEM, SUBREG, or CONST_INT) that refers to the least-significant part of X. MODE specifies how big a part of X to return; it usually should not be larger than a word. If X is a MEM whose address is a QUEUED, the value may be so also. */ rtx gen_lowpart (mode, x) enum machine_mode mode; register rtx x; { rtx result = gen_lowpart_common (mode, x); if (result) return result; else if (GET_CODE (x) == REG) { /* Must be a hard reg that's not valid in MODE. */ result = gen_lowpart_common (mode, copy_to_reg (x)); if (result == 0) abort (); } else if (GET_CODE (x) == MEM) { /* The only additional case we can do is MEM. */ register int offset = 0; if (WORDS_BIG_ENDIAN) offset = (MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD) - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD)); if (BYTES_BIG_ENDIAN) /* Adjust the address so that the address-after-the-data is unchanged. */ offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode)) - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x)))); return change_address (x, mode, plus_constant (XEXP (x, 0), offset)); } else abort (); } /* Like `gen_lowpart', but refer to the most significant part. This is used to access the imaginary part of a complex number. */ rtx gen_highpart (mode, x) enum machine_mode mode; register rtx x; { /* This case loses if X is a subreg. To catch bugs early, complain if an invalid MODE is used even in other cases. */ if (GET_MODE_SIZE (mode) > UNITS_PER_WORD && GET_MODE_SIZE (mode) != GET_MODE_UNIT_SIZE (GET_MODE (x))) abort (); if (GET_CODE (x) == CONST_DOUBLE #if !(TARGET_FLOAT_FORMAT != HOST_FLOAT_FORMAT || defined (REAL_IS_NOT_DOUBLE)) && GET_MODE_CLASS (GET_MODE (x)) != MODE_FLOAT #endif ) return gen_rtx (CONST_INT, VOIDmode, CONST_DOUBLE_HIGH (x) & GET_MODE_MASK (mode)); else if (GET_CODE (x) == CONST_INT) return const0_rtx; else if (GET_CODE (x) == MEM) { register int offset = 0; if (! WORDS_BIG_ENDIAN) offset = (MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD) - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD)); if (! BYTES_BIG_ENDIAN && GET_MODE_SIZE (mode) < UNITS_PER_WORD) offset -= (GET_MODE_SIZE (mode) - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x)))); return change_address (x, mode, plus_constant (XEXP (x, 0), offset)); } else if (GET_CODE (x) == SUBREG) { /* The only time this should occur is when we are looking at a multi-word item with a SUBREG whose mode is the same as that of the item. It isn't clear what we would do if it wasn't. */ if (SUBREG_WORD (x) != 0) abort (); return gen_highpart (mode, SUBREG_REG (x)); } else if (GET_CODE (x) == REG) { int word = 0; if (! WORDS_BIG_ENDIAN && GET_MODE_SIZE (GET_MODE (x)) > UNITS_PER_WORD) word = ((GET_MODE_SIZE (GET_MODE (x)) - MAX (GET_MODE_SIZE (mode), UNITS_PER_WORD)) / UNITS_PER_WORD); /* * ??? This fails miserably for complex values being passed in registers * where the sizeof the real and imaginary part are not equal to the * sizeof SImode. FIXME */ if (REGNO (x) < FIRST_PSEUDO_REGISTER /* integrate.c can't handle parts of a return value register. */ && (! REG_FUNCTION_VALUE_P (x) || ! rtx_equal_function_value_matters) /* We want to keep the stack, frame, and arg pointers special. */ && x != frame_pointer_rtx #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM && x != arg_pointer_rtx #endif && x != stack_pointer_rtx) return gen_rtx (REG, mode, REGNO (x) + word); else return gen_rtx (SUBREG, mode, x, word); } else abort (); } /* Return 1 iff X, assumed to be a SUBREG, refers to the least significant part of its containing reg. If X is not a SUBREG, always return 1 (it is its own low part!). */ int subreg_lowpart_p (x) rtx x; { if (GET_CODE (x) != SUBREG) return 1; if (WORDS_BIG_ENDIAN && GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))) > UNITS_PER_WORD) return (SUBREG_WORD (x) == ((GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))) - MAX (GET_MODE_SIZE (GET_MODE (x)), UNITS_PER_WORD)) / UNITS_PER_WORD)); return SUBREG_WORD (x) == 0; } /* Return subword I of operand OP. The word number, I, is interpreted as the word number starting at the low-order address. Word 0 is the low-order word if not WORDS_BIG_ENDIAN, otherwise it is the high-order word. If we cannot extract the required word, we return zero. Otherwise, an rtx corresponding to the requested word will be returned. VALIDATE_ADDRESS is nonzero if the address should be validated. Before reload has completed, a valid address will always be returned. After reload, if a valid address cannot be returned, we return zero. If VALIDATE_ADDRESS is zero, we simply form the required address; validating it is the responsibility of the caller. MODE is the mode of OP in case it is a CONST_INT. */ rtx operand_subword (op, i, validate_address, mode) rtx op; int i; int validate_address; enum machine_mode mode; { HOST_WIDE_INT val; int size_ratio = HOST_BITS_PER_WIDE_INT / BITS_PER_WORD; if (mode == VOIDmode) mode = GET_MODE (op); if (mode == VOIDmode) abort (); /* If OP is narrower than a word or if we want a word outside OP, fail. */ if (mode != BLKmode && (GET_MODE_SIZE (mode) < UNITS_PER_WORD || (i + 1) * UNITS_PER_WORD > GET_MODE_SIZE (mode))) return 0; /* If OP is already an integer word, return it. */ if (GET_MODE_CLASS (mode) == MODE_INT && GET_MODE_SIZE (mode) == UNITS_PER_WORD) return op; /* If OP is a REG or SUBREG, we can handle it very simply. */ if (GET_CODE (op) == REG) { /* If the register is not valid for MODE, return 0. If we don't do this, there is no way to fix up the resulting REG later. */ if (REGNO (op) < FIRST_PSEUDO_REGISTER && ! HARD_REGNO_MODE_OK (REGNO (op) + i, word_mode)) return 0; else if (REGNO (op) >= FIRST_PSEUDO_REGISTER || (REG_FUNCTION_VALUE_P (op) && rtx_equal_function_value_matters) /* We want to keep the stack, frame, and arg pointers special. */ || op == frame_pointer_rtx #if FRAME_POINTER_REGNUM != ARG_POINTER_REGNUM || op == arg_pointer_rtx #endif || op == stack_pointer_rtx) return gen_rtx (SUBREG, word_mode, op, i); else return gen_rtx (REG, word_mode, REGNO (op) + i); } else if (GET_CODE (op) == SUBREG) return gen_rtx (SUBREG, word_mode, SUBREG_REG (op), i + SUBREG_WORD (op)); else if (GET_CODE (op) == CONCAT) { int partwords = GET_MODE_UNIT_SIZE (GET_MODE (op)) / UNITS_PER_WORD; if (i < partwords) return operand_subword (XEXP (op, 0), i, validate_address, mode); return operand_subword (XEXP (op, 1), i - partwords, validate_address, mode); } /* Form a new MEM at the requested address. */ if (GET_CODE (op) == MEM) { rtx addr = plus_constant (XEXP (op, 0), i * UNITS_PER_WORD); rtx new; if (validate_address) { if (reload_completed) { if (! strict_memory_address_p (word_mode, addr)) return 0; } else addr = memory_address (word_mode, addr); } new = gen_rtx (MEM, word_mode, addr); MEM_VOLATILE_P (new) = MEM_VOLATILE_P (op); MEM_IN_STRUCT_P (new) = MEM_IN_STRUCT_P (op); RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (op); return new; } /* The only remaining cases are when OP is a constant. If the host and target floating formats are the same, handling two-word floating constants are easy. Note that REAL_VALUE_TO_TARGET_{SINGLE,DOUBLE} are defined as returning one or two 32 bit values, respectively, and not values of BITS_PER_WORD bits. */ #ifdef REAL_ARITHMETIC /* The output is some bits, the width of the target machine's word. A wider-word host can surely hold them in a CONST_INT. A narrower-word host can't. */ if (HOST_BITS_PER_WIDE_INT >= BITS_PER_WORD && GET_MODE_CLASS (mode) == MODE_FLOAT && GET_MODE_BITSIZE (mode) == 64 && GET_CODE (op) == CONST_DOUBLE) { long k[2]; REAL_VALUE_TYPE rv; REAL_VALUE_FROM_CONST_DOUBLE (rv, op); REAL_VALUE_TO_TARGET_DOUBLE (rv, k); /* We handle 32-bit and >= 64-bit words here. Note that the order in which the words are written depends on the word endianness. ??? This is a potential portability problem and should be fixed at some point. */ if (BITS_PER_WORD == 32) return GEN_INT ((HOST_WIDE_INT) k[i]); #if HOST_BITS_PER_WIDE_INT > 32 else if (BITS_PER_WORD >= 64 && i == 0) return GEN_INT ((((HOST_WIDE_INT) k[! WORDS_BIG_ENDIAN]) << 32) | (HOST_WIDE_INT) k[WORDS_BIG_ENDIAN]); #endif else if (BITS_PER_WORD == 16) { long value; value = k[i >> 1]; if ((i & 0x1) == 0) value >>= 16; value &= 0xffff; return GEN_INT ((HOST_WIDE_INT) value); } else abort (); } #else /* no REAL_ARITHMETIC */ if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT && HOST_BITS_PER_WIDE_INT == BITS_PER_WORD) || flag_pretend_float) && GET_MODE_CLASS (mode) == MODE_FLOAT && GET_MODE_SIZE (mode) == 2 * UNITS_PER_WORD && GET_CODE (op) == CONST_DOUBLE) { /* The constant is stored in the host's word-ordering, but we want to access it in the target's word-ordering. Some compilers don't like a conditional inside macro args, so we have two copies of the return. */ #ifdef HOST_WORDS_BIG_ENDIAN return GEN_INT (i == WORDS_BIG_ENDIAN ? CONST_DOUBLE_HIGH (op) : CONST_DOUBLE_LOW (op)); #else return GEN_INT (i != WORDS_BIG_ENDIAN ? CONST_DOUBLE_HIGH (op) : CONST_DOUBLE_LOW (op)); #endif } #endif /* no REAL_ARITHMETIC */ /* Single word float is a little harder, since single- and double-word values often do not have the same high-order bits. We have already verified that we want the only defined word of the single-word value. */ #ifdef REAL_ARITHMETIC if (GET_MODE_CLASS (mode) == MODE_FLOAT && GET_MODE_BITSIZE (mode) == 32 && GET_CODE (op) == CONST_DOUBLE) { long l; REAL_VALUE_TYPE rv; REAL_VALUE_FROM_CONST_DOUBLE (rv, op); REAL_VALUE_TO_TARGET_SINGLE (rv, l); return GEN_INT ((HOST_WIDE_INT) l); } #else if (((HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT && HOST_BITS_PER_WIDE_INT == BITS_PER_WORD) || flag_pretend_float) && GET_MODE_CLASS (mode) == MODE_FLOAT && GET_MODE_SIZE (mode) == UNITS_PER_WORD && GET_CODE (op) == CONST_DOUBLE) { double d; union {float f; HOST_WIDE_INT i; } u; REAL_VALUE_FROM_CONST_DOUBLE (d, op); u.f = d; return GEN_INT (u.i); } #endif /* no REAL_ARITHMETIC */ /* The only remaining cases that we can handle are integers. Convert to proper endianness now since these cases need it. At this point, i == 0 means the low-order word. We do not want to handle the case when BITS_PER_WORD <= HOST_BITS_PER_INT in general. However, if OP is (const_int 0), we can just return it for any word. */ if (op == const0_rtx) return op; if (GET_MODE_CLASS (mode) != MODE_INT || (GET_CODE (op) != CONST_INT && GET_CODE (op) != CONST_DOUBLE) || BITS_PER_WORD > HOST_BITS_PER_WIDE_INT) return 0; if (WORDS_BIG_ENDIAN) i = GET_MODE_SIZE (mode) / UNITS_PER_WORD - 1 - i; /* Find out which word on the host machine this value is in and get it from the constant. */ val = (i / size_ratio == 0 ? (GET_CODE (op) == CONST_INT ? INTVAL (op) : CONST_DOUBLE_LOW (op)) : (GET_CODE (op) == CONST_INT ? (INTVAL (op) < 0 ? ~0 : 0) : CONST_DOUBLE_HIGH (op))); /* If BITS_PER_WORD is smaller than an int, get the appropriate bits. */ if (BITS_PER_WORD < HOST_BITS_PER_WIDE_INT) val = ((val >> ((i % size_ratio) * BITS_PER_WORD)) & (((HOST_WIDE_INT) 1 << (BITS_PER_WORD % HOST_BITS_PER_WIDE_INT)) - 1)); return GEN_INT (val); } /* Similar to `operand_subword', but never return 0. If we can't extract the required subword, put OP into a register and try again. If that fails, abort. We always validate the address in this case. It is not valid to call this function after reload; it is mostly meant for RTL generation. MODE is the mode of OP, in case it is CONST_INT. */ rtx operand_subword_force (op, i, mode) rtx op; int i; enum machine_mode mode; { rtx result = operand_subword (op, i, 1, mode); if (result) return result; if (mode != BLKmode && mode != VOIDmode) op = force_reg (mode, op); result = operand_subword (op, i, 1, mode); if (result == 0) abort (); return result; } /* Given a compare instruction, swap the operands. A test instruction is changed into a compare of 0 against the operand. */ void reverse_comparison (insn) rtx insn; { rtx body = PATTERN (insn); rtx comp; if (GET_CODE (body) == SET) comp = SET_SRC (body); else comp = SET_SRC (XVECEXP (body, 0, 0)); if (GET_CODE (comp) == COMPARE) { rtx op0 = XEXP (comp, 0); rtx op1 = XEXP (comp, 1); XEXP (comp, 0) = op1; XEXP (comp, 1) = op0; } else { rtx new = gen_rtx (COMPARE, VOIDmode, CONST0_RTX (GET_MODE (comp)), comp); if (GET_CODE (body) == SET) SET_SRC (body) = new; else SET_SRC (XVECEXP (body, 0, 0)) = new; } } /* Return a memory reference like MEMREF, but with its mode changed to MODE and its address changed to ADDR. (VOIDmode means don't change the mode. NULL for ADDR means don't change the address.) */ rtx change_address (memref, mode, addr) rtx memref; enum machine_mode mode; rtx addr; { rtx new; if (GET_CODE (memref) != MEM) abort (); if (mode == VOIDmode) mode = GET_MODE (memref); if (addr == 0) addr = XEXP (memref, 0); /* If reload is in progress or has completed, ADDR must be valid. Otherwise, we can call memory_address to make it valid. */ if (reload_completed || reload_in_progress) { if (! memory_address_p (mode, addr)) abort (); } else addr = memory_address (mode, addr); new = gen_rtx (MEM, mode, addr); MEM_VOLATILE_P (new) = MEM_VOLATILE_P (memref); RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (memref); MEM_IN_STRUCT_P (new) = MEM_IN_STRUCT_P (memref); return new; } /* Return a newly created CODE_LABEL rtx with a unique label number. */ rtx gen_label_rtx () { register rtx label; label = (output_bytecode ? gen_rtx (CODE_LABEL, VOIDmode, NULL, bc_get_bytecode_label ()) : gen_rtx (CODE_LABEL, VOIDmode, 0, 0, 0, label_num++, NULL_PTR)); LABEL_NUSES (label) = 0; return label; } /* For procedure integration. */ /* Return a newly created INLINE_HEADER rtx. Should allocate this from a permanent obstack when the opportunity arises. */ rtx gen_inline_header_rtx (first_insn, first_parm_insn, first_labelno, last_labelno, max_parm_regnum, max_regnum, args_size, pops_args, stack_slots, forced_labels, function_flags, outgoing_args_size, original_arg_vector, original_decl_initial) rtx first_insn, first_parm_insn; int first_labelno, last_labelno, max_parm_regnum, max_regnum, args_size; int pops_args; rtx stack_slots; rtx forced_labels; int function_flags; int outgoing_args_size; rtvec original_arg_vector; rtx original_decl_initial; { rtx header = gen_rtx (INLINE_HEADER, VOIDmode, cur_insn_uid++, NULL_RTX, first_insn, first_parm_insn, first_labelno, last_labelno, max_parm_regnum, max_regnum, args_size, pops_args, stack_slots, forced_labels, function_flags, outgoing_args_size, original_arg_vector, original_decl_initial); return header; } /* Install new pointers to the first and last insns in the chain. Used for an inline-procedure after copying the insn chain. */ void set_new_first_and_last_insn (first, last) rtx first, last; { first_insn = first; last_insn = last; } /* Set the range of label numbers found in the current function. This is used when belatedly compiling an inline function. */ void set_new_first_and_last_label_num (first, last) int first, last; { base_label_num = label_num; first_label_num = first; last_label_num = last; } /* Save all variables describing the current status into the structure *P. This is used before starting a nested function. */ void save_emit_status (p) struct function *p; { p->reg_rtx_no = reg_rtx_no; p->first_label_num = first_label_num; p->first_insn = first_insn; p->last_insn = last_insn; p->sequence_rtl_expr = sequence_rtl_expr; p->sequence_stack = sequence_stack; p->cur_insn_uid = cur_insn_uid; p->last_linenum = last_linenum; p->last_filename = last_filename; p->regno_pointer_flag = regno_pointer_flag; p->regno_pointer_flag_length = regno_pointer_flag_length; p->regno_reg_rtx = regno_reg_rtx; } /* Restore all variables describing the current status from the structure *P. This is used after a nested function. */ void restore_emit_status (p) struct function *p; { int i; reg_rtx_no = p->reg_rtx_no; first_label_num = p->first_label_num; last_label_num = 0; first_insn = p->first_insn; last_insn = p->last_insn; sequence_rtl_expr = p->sequence_rtl_expr; sequence_stack = p->sequence_stack; cur_insn_uid = p->cur_insn_uid; last_linenum = p->last_linenum; last_filename = p->last_filename; regno_pointer_flag = p->regno_pointer_flag; regno_pointer_flag_length = p->regno_pointer_flag_length; regno_reg_rtx = p->regno_reg_rtx; /* Clear our cache of rtx expressions for start_sequence and gen_sequence. */ sequence_element_free_list = 0; for (i = 0; i < SEQUENCE_RESULT_SIZE; i++) sequence_result[i] = 0; } /* Go through all the RTL insn bodies and copy any invalid shared structure. It does not work to do this twice, because the mark bits set here are not cleared afterwards. */ void unshare_all_rtl (insn) register rtx insn; { for (; insn; insn = NEXT_INSN (insn)) if (GET_CODE (insn) == INSN || GET_CODE (insn) == JUMP_INSN || GET_CODE (insn) == CALL_INSN) { PATTERN (insn) = copy_rtx_if_shared (PATTERN (insn)); REG_NOTES (insn) = copy_rtx_if_shared (REG_NOTES (insn)); LOG_LINKS (insn) = copy_rtx_if_shared (LOG_LINKS (insn)); } /* Make sure the addresses of stack slots found outside the insn chain (such as, in DECL_RTL of a variable) are not shared with the insn chain. This special care is necessary when the stack slot MEM does not actually appear in the insn chain. If it does appear, its address is unshared from all else at that point. */ copy_rtx_if_shared (stack_slot_list); } /* Mark ORIG as in use, and return a copy of it if it was already in use. Recursively does the same for subexpressions. */ rtx copy_rtx_if_shared (orig) rtx orig; { register rtx x = orig; register int i; register enum rtx_code code; register char *format_ptr; int copied = 0; if (x == 0) return 0; code = GET_CODE (x); /* These types may be freely shared. */ switch (code) { case REG: case QUEUED: case CONST_INT: case CONST_DOUBLE: case SYMBOL_REF: case CODE_LABEL: case PC: case CC0: case SCRATCH: /* SCRATCH must be shared because they represent distinct values. */ return x; case CONST: /* CONST can be shared if it contains a SYMBOL_REF. If it contains a LABEL_REF, it isn't sharable. */ if (GET_CODE (XEXP (x, 0)) == PLUS && GET_CODE (XEXP (XEXP (x, 0), 0)) == SYMBOL_REF && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT) return x; break; case INSN: case JUMP_INSN: case CALL_INSN: case NOTE: case BARRIER: /* The chain of insns is not being copied. */ return x; case MEM: /* A MEM is allowed to be shared if its address is constant or is a constant plus one of the special registers. */ if (CONSTANT_ADDRESS_P (XEXP (x, 0)) || XEXP (x, 0) == virtual_stack_vars_rtx || XEXP (x, 0) == virtual_incoming_args_rtx) return x; if (GET_CODE (XEXP (x, 0)) == PLUS && (XEXP (XEXP (x, 0), 0) == virtual_stack_vars_rtx || XEXP (XEXP (x, 0), 0) == virtual_incoming_args_rtx) && CONSTANT_ADDRESS_P (XEXP (XEXP (x, 0), 1))) { /* This MEM can appear in more than one place, but its address better not be shared with anything else. */ if (! x->used) XEXP (x, 0) = copy_rtx_if_shared (XEXP (x, 0)); x->used = 1; return x; } } /* This rtx may not be shared. If it has already been seen, replace it with a copy of itself. */ if (x->used) { register rtx copy; copy = rtx_alloc (code); bcopy ((char *) x, (char *) copy, (sizeof (*copy) - sizeof (copy->fld) + sizeof (copy->fld[0]) * GET_RTX_LENGTH (code))); x = copy; copied = 1; } x->used = 1; /* Now scan the subexpressions recursively. We can store any replaced subexpressions directly into X since we know X is not shared! Any vectors in X must be copied if X was copied. */ format_ptr = GET_RTX_FORMAT (code); for (i = 0; i < GET_RTX_LENGTH (code); i++) { switch (*format_ptr++) { case 'e': XEXP (x, i) = copy_rtx_if_shared (XEXP (x, i)); break; case 'E': if (XVEC (x, i) != NULL) { register int j; int len = XVECLEN (x, i); if (copied && len > 0) XVEC (x, i) = gen_rtvec_v (len, &XVECEXP (x, i, 0)); for (j = 0; j < len; j++) XVECEXP (x, i, j) = copy_rtx_if_shared (XVECEXP (x, i, j)); } break; } } return x; } /* Clear all the USED bits in X to allow copy_rtx_if_shared to be used to look for shared sub-parts. */ void reset_used_flags (x) rtx x; { register int i, j; register enum rtx_code code; register char *format_ptr; if (x == 0) return; code = GET_CODE (x); /* These types may be freely shared so we needn't do any resetting for them. */ switch (code) { case REG: case QUEUED: case CONST_INT: case CONST_DOUBLE: case SYMBOL_REF: case CODE_LABEL: case PC: case CC0: return; case INSN: case JUMP_INSN: case CALL_INSN: case NOTE: case LABEL_REF: case BARRIER: /* The chain of insns is not being copied. */ return; } x->used = 0; format_ptr = GET_RTX_FORMAT (code); for (i = 0; i < GET_RTX_LENGTH (code); i++) { switch (*format_ptr++) { case 'e': reset_used_flags (XEXP (x, i)); break; case 'E': for (j = 0; j < XVECLEN (x, i); j++) reset_used_flags (XVECEXP (x, i, j)); break; } } } /* Copy X if necessary so that it won't be altered by changes in OTHER. Return X or the rtx for the pseudo reg the value of X was copied into. OTHER must be valid as a SET_DEST. */ rtx make_safe_from (x, other) rtx x, other; { while (1) switch (GET_CODE (other)) { case SUBREG: other = SUBREG_REG (other); break; case STRICT_LOW_PART: case SIGN_EXTEND: case ZERO_EXTEND: other = XEXP (other, 0); break; default: goto done; } done: if ((GET_CODE (other) == MEM && ! CONSTANT_P (x) && GET_CODE (x) != REG && GET_CODE (x) != SUBREG) || (GET_CODE (other) == REG && (REGNO (other) < FIRST_PSEUDO_REGISTER || reg_mentioned_p (other, x)))) { rtx temp = gen_reg_rtx (GET_MODE (x)); emit_move_insn (temp, x); return temp; } return x; } /* Emission of insns (adding them to the doubly-linked list). */ /* Return the first insn of the current sequence or current function. */ rtx get_insns () { return first_insn; } /* Return the last insn emitted in current sequence or current function. */ rtx get_last_insn () { return last_insn; } /* Specify a new insn as the last in the chain. */ void set_last_insn (insn) rtx insn; { if (NEXT_INSN (insn) != 0) abort (); last_insn = insn; } /* Return the last insn emitted, even if it is in a sequence now pushed. */ rtx get_last_insn_anywhere () { struct sequence_stack *stack; if (last_insn) return last_insn; for (stack = sequence_stack; stack; stack = stack->next) if (stack->last != 0) return stack->last; return 0; } /* Return a number larger than any instruction's uid in this function. */ int get_max_uid () { return cur_insn_uid; } /* Return the next insn. If it is a SEQUENCE, return the first insn of the sequence. */ rtx next_insn (insn) rtx insn; { if (insn) { insn = NEXT_INSN (insn); if (insn && GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == SEQUENCE) insn = XVECEXP (PATTERN (insn), 0, 0); } return insn; } /* Return the previous insn. If it is a SEQUENCE, return the last insn of the sequence. */ rtx previous_insn (insn) rtx insn; { if (insn) { insn = PREV_INSN (insn); if (insn && GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == SEQUENCE) insn = XVECEXP (PATTERN (insn), 0, XVECLEN (PATTERN (insn), 0) - 1); } return insn; } /* Return the next insn after INSN that is not a NOTE. This routine does not look inside SEQUENCEs. */ rtx next_nonnote_insn (insn) rtx insn; { while (insn) { insn = NEXT_INSN (insn); if (insn == 0 || GET_CODE (insn) != NOTE) break; } return insn; } /* Return the previous insn before INSN that is not a NOTE. This routine does not look inside SEQUENCEs. */ rtx prev_nonnote_insn (insn) rtx insn; { while (insn) { insn = PREV_INSN (insn); if (insn == 0 || GET_CODE (insn) != NOTE) break; } return insn; } /* Return the next INSN, CALL_INSN or JUMP_INSN after INSN; or 0, if there is none. This routine does not look inside SEQUENCEs. */ rtx next_real_insn (insn) rtx insn; { while (insn) { insn = NEXT_INSN (insn); if (insn == 0 || GET_CODE (insn) == INSN || GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN) break; } return insn; } /* Return the last INSN, CALL_INSN or JUMP_INSN before INSN; or 0, if there is none. This routine does not look inside SEQUENCEs. */ rtx prev_real_insn (insn) rtx insn; { while (insn) { insn = PREV_INSN (insn); if (insn == 0 || GET_CODE (insn) == INSN || GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN) break; } return insn; } /* Find the next insn after INSN that really does something. This routine does not look inside SEQUENCEs. Until reload has completed, this is the same as next_real_insn. */ rtx next_active_insn (insn) rtx insn; { while (insn) { insn = NEXT_INSN (insn); if (insn == 0 || GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN || (GET_CODE (insn) == INSN && (! reload_completed || (GET_CODE (PATTERN (insn)) != USE && GET_CODE (PATTERN (insn)) != CLOBBER)))) break; } return insn; } /* Find the last insn before INSN that really does something. This routine does not look inside SEQUENCEs. Until reload has completed, this is the same as prev_real_insn. */ rtx prev_active_insn (insn) rtx insn; { while (insn) { insn = PREV_INSN (insn); if (insn == 0 || GET_CODE (insn) == CALL_INSN || GET_CODE (insn) == JUMP_INSN || (GET_CODE (insn) == INSN && (! reload_completed || (GET_CODE (PATTERN (insn)) != USE && GET_CODE (PATTERN (insn)) != CLOBBER)))) break; } return insn; } /* Return the next CODE_LABEL after the insn INSN, or 0 if there is none. */ rtx next_label (insn) rtx insn; { while (insn) { insn = NEXT_INSN (insn); if (insn == 0 || GET_CODE (insn) == CODE_LABEL) break; } return insn; } /* Return the last CODE_LABEL before the insn INSN, or 0 if there is none. */ rtx prev_label (insn) rtx insn; { while (insn) { insn = PREV_INSN (insn); if (insn == 0 || GET_CODE (insn) == CODE_LABEL) break; } return insn; } #ifdef HAVE_cc0 /* INSN uses CC0 and is being moved into a delay slot. Set up REG_CC_SETTER and REG_CC_USER notes so we can find it. */ void link_cc0_insns (insn) rtx insn; { rtx user = next_nonnote_insn (insn); if (GET_CODE (user) == INSN && GET_CODE (PATTERN (user)) == SEQUENCE) user = XVECEXP (PATTERN (user), 0, 0); REG_NOTES (user) = gen_rtx (INSN_LIST, REG_CC_SETTER, insn, REG_NOTES (user)); REG_NOTES (insn) = gen_rtx (INSN_LIST, REG_CC_USER, user, REG_NOTES (insn)); } /* Return the next insn that uses CC0 after INSN, which is assumed to set it. This is the inverse of prev_cc0_setter (i.e., prev_cc0_setter applied to the result of this function should yield INSN). Normally, this is simply the next insn. However, if a REG_CC_USER note is present, it contains the insn that uses CC0. Return 0 if we can't find the insn. */ rtx next_cc0_user (insn) rtx insn; { rtx note = find_reg_note (insn, REG_CC_USER, NULL_RTX); if (note) return XEXP (note, 0); insn = next_nonnote_insn (insn); if (insn && GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == SEQUENCE) insn = XVECEXP (PATTERN (insn), 0, 0); if (insn && GET_RTX_CLASS (GET_CODE (insn)) == 'i' && reg_mentioned_p (cc0_rtx, PATTERN (insn))) return insn; return 0; } /* Find the insn that set CC0 for INSN. Unless INSN has a REG_CC_SETTER note, it is the previous insn. */ rtx prev_cc0_setter (insn) rtx insn; { rtx note = find_reg_note (insn, REG_CC_SETTER, NULL_RTX); rtx link; if (note) return XEXP (note, 0); insn = prev_nonnote_insn (insn); if (! sets_cc0_p (PATTERN (insn))) abort (); return insn; } #endif /* Try splitting insns that can be split for better scheduling. PAT is the pattern which might split. TRIAL is the insn providing PAT. LAST is non-zero if we should return the last insn of the sequence produced. If this routine succeeds in splitting, it returns the first or last replacement insn depending on the value of LAST. Otherwise, it returns TRIAL. If the insn to be returned can be split, it will be. */ rtx try_split (pat, trial, last) rtx pat, trial; int last; { rtx before = PREV_INSN (trial); rtx after = NEXT_INSN (trial); rtx seq = split_insns (pat, trial); int has_barrier = 0; rtx tem; /* If we are splitting a JUMP_INSN, it might be followed by a BARRIER. We may need to handle this specially. */ if (after && GET_CODE (after) == BARRIER) { has_barrier = 1; after = NEXT_INSN (after); } if (seq) { /* SEQ can either be a SEQUENCE or the pattern of a single insn. The latter case will normally arise only when being done so that it, in turn, will be split (SFmode on the 29k is an example). */ if (GET_CODE (seq) == SEQUENCE) { /* If we are splitting a JUMP_INSN, look for the JUMP_INSN in SEQ and copy our JUMP_LABEL to it. If JUMP_LABEL is non-zero, increment the usage count so we don't delete the label. */ int i; if (GET_CODE (trial) == JUMP_INSN) for (i = XVECLEN (seq, 0) - 1; i >= 0; i--) if (GET_CODE (XVECEXP (seq, 0, i)) == JUMP_INSN) { JUMP_LABEL (XVECEXP (seq, 0, i)) = JUMP_LABEL (trial); if (JUMP_LABEL (trial)) LABEL_NUSES (JUMP_LABEL (trial))++; } tem = emit_insn_after (seq, before); delete_insn (trial); if (has_barrier) emit_barrier_after (tem); /* Recursively call try_split for each new insn created; by the time control returns here that insn will be fully split, so set LAST and continue from the insn after the one returned. We can't use next_active_insn here since AFTER may be a note. Ignore deleted insns, which can be occur if not optimizing. */ for (tem = NEXT_INSN (before); tem != after; tem = NEXT_INSN (tem)) if (! INSN_DELETED_P (tem)) tem = try_split (PATTERN (tem), tem, 1); } /* Avoid infinite loop if the result matches the original pattern. */ else if (rtx_equal_p (seq, pat)) return trial; else { PATTERN (trial) = seq; INSN_CODE (trial) = -1; try_split (seq, trial, last); } /* Return either the first or the last insn, depending on which was requested. */ return last ? prev_active_insn (after) : next_active_insn (before); } return trial; } /* Make and return an INSN rtx, initializing all its slots. Store PATTERN in the pattern slots. */ rtx make_insn_raw (pattern) rtx pattern; { register rtx insn; insn = rtx_alloc (INSN); INSN_UID (insn) = cur_insn_uid++; PATTERN (insn) = pattern; INSN_CODE (insn) = -1; LOG_LINKS (insn) = NULL; REG_NOTES (insn) = NULL; return insn; } /* Like `make_insn' but make a JUMP_INSN instead of an insn. */ static rtx make_jump_insn_raw (pattern) rtx pattern; { register rtx insn; insn = rtx_alloc (JUMP_INSN); INSN_UID (insn) = cur_insn_uid++; PATTERN (insn) = pattern; INSN_CODE (insn) = -1; LOG_LINKS (insn) = NULL; REG_NOTES (insn) = NULL; JUMP_LABEL (insn) = NULL; return insn; } /* Like `make_insn' but make a CALL_INSN instead of an insn. */ static rtx make_call_insn_raw (pattern) rtx pattern; { register rtx insn; insn = rtx_alloc (CALL_INSN); INSN_UID (insn) = cur_insn_uid++; PATTERN (insn) = pattern; INSN_CODE (insn) = -1; LOG_LINKS (insn) = NULL; REG_NOTES (insn) = NULL; CALL_INSN_FUNCTION_USAGE (insn) = NULL; return insn; } /* Add INSN to the end of the doubly-linked list. INSN may be an INSN, JUMP_INSN, CALL_INSN, CODE_LABEL, BARRIER or NOTE. */ void add_insn (insn) register rtx insn; { PREV_INSN (insn) = last_insn; NEXT_INSN (insn) = 0; if (NULL != last_insn) NEXT_INSN (last_insn) = insn; if (NULL == first_insn) first_insn = insn; last_insn = insn; } /* Add INSN into the doubly-linked list after insn AFTER. This and the next should be the only functions called to insert an insn once delay slots have been filled since only they know how to update a SEQUENCE. */ void add_insn_after (insn, after) rtx insn, after; { rtx next = NEXT_INSN (after); if (optimize && INSN_DELETED_P (after)) abort (); NEXT_INSN (insn) = next; PREV_INSN (insn) = after; if (next) { PREV_INSN (next) = insn; if (GET_CODE (next) == INSN && GET_CODE (PATTERN (next)) == SEQUENCE) PREV_INSN (XVECEXP (PATTERN (next), 0, 0)) = insn; } else if (last_insn == after) last_insn = insn; else { struct sequence_stack *stack = sequence_stack; /* Scan all pending sequences too. */ for (; stack; stack = stack->next) if (after == stack->last) { stack->last = insn; break; } if (stack == 0) abort (); } NEXT_INSN (after) = insn; if (GET_CODE (after) == INSN && GET_CODE (PATTERN (after)) == SEQUENCE) { rtx sequence = PATTERN (after); NEXT_INSN (XVECEXP (sequence, 0, XVECLEN (sequence, 0) - 1)) = insn; } } /* Add INSN into the doubly-linked list before insn BEFORE. This and the previous should be the only functions called to insert an insn once delay slots have been filled since only they know how to update a SEQUENCE. */ void add_insn_before (insn, before) rtx insn, before; { rtx prev = PREV_INSN (before); if (optimize && INSN_DELETED_P (before)) abort (); PREV_INSN (insn) = prev; NEXT_INSN (insn) = before; if (prev) { NEXT_INSN (prev) = insn; if (GET_CODE (prev) == INSN && GET_CODE (PATTERN (prev)) == SEQUENCE) { rtx sequence = PATTERN (prev); NEXT_INSN (XVECEXP (sequence, 0, XVECLEN (sequence, 0) - 1)) = insn; } } else if (first_insn == before) first_insn = insn; else { struct sequence_stack *stack = sequence_stack; /* Scan all pending sequences too. */ for (; stack; stack = stack->next) if (before == stack->first) { stack->first = insn; break; } if (stack == 0) abort (); } PREV_INSN (before) = insn; if (GET_CODE (before) == INSN && GET_CODE (PATTERN (before)) == SEQUENCE) PREV_INSN (XVECEXP (PATTERN (before), 0, 0)) = insn; } /* Delete all insns made since FROM. FROM becomes the new last instruction. */ void delete_insns_since (from) rtx from; { if (from == 0) first_insn = 0; else NEXT_INSN (from) = 0; last_insn = from; } /* This function is deprecated, please use sequences instead. Move a consecutive bunch of insns to a different place in the chain. The insns to be moved are those between FROM and TO. They are moved to a new position after the insn AFTER. AFTER must not be FROM or TO or any insn in between. This function does not know about SEQUENCEs and hence should not be called after delay-slot filling has been done. */ void reorder_insns (from, to, after) rtx from, to, after; { /* Splice this bunch out of where it is now. */ if (PREV_INSN (from)) NEXT_INSN (PREV_INSN (from)) = NEXT_INSN (to); if (NEXT_INSN (to)) PREV_INSN (NEXT_INSN (to)) = PREV_INSN (from); if (last_insn == to) last_insn = PREV_INSN (from); if (first_insn == from) first_insn = NEXT_INSN (to); /* Make the new neighbors point to it and it to them. */ if (NEXT_INSN (after)) PREV_INSN (NEXT_INSN (after)) = to; NEXT_INSN (to) = NEXT_INSN (after); PREV_INSN (from) = after; NEXT_INSN (after) = from; if (after == last_insn) last_insn = to; } /* Return the line note insn preceding INSN. */ static rtx find_line_note (insn) rtx insn; { if (no_line_numbers) return 0; for (; insn; insn = PREV_INSN (insn)) if (GET_CODE (insn) == NOTE && NOTE_LINE_NUMBER (insn) >= 0) break; return insn; } /* Like reorder_insns, but inserts line notes to preserve the line numbers of the moved insns when debugging. This may insert a note between AFTER and FROM, and another one after TO. */ void reorder_insns_with_line_notes (from, to, after) rtx from, to, after; { rtx from_line = find_line_note (from); rtx after_line = find_line_note (after); reorder_insns (from, to, after); if (from_line == after_line) return; if (from_line) emit_line_note_after (NOTE_SOURCE_FILE (from_line), NOTE_LINE_NUMBER (from_line), after); if (after_line) emit_line_note_after (NOTE_SOURCE_FILE (after_line), NOTE_LINE_NUMBER (after_line), to); } /* Emit an insn of given code and pattern at a specified place within the doubly-linked list. */ /* Make an instruction with body PATTERN and output it before the instruction BEFORE. */ rtx emit_insn_before (pattern, before) register rtx pattern, before; { register rtx insn = before; if (GET_CODE (pattern) == SEQUENCE) { register int i; for (i = 0; i < XVECLEN (pattern, 0); i++) { insn = XVECEXP (pattern, 0, i); add_insn_before (insn, before); } if (XVECLEN (pattern, 0) < SEQUENCE_RESULT_SIZE) sequence_result[XVECLEN (pattern, 0)] = pattern; } else { insn = make_insn_raw (pattern); add_insn_before (insn, before); } return insn; } /* Make an instruction with body PATTERN and code JUMP_INSN and output it before the instruction BEFORE. */ rtx emit_jump_insn_before (pattern, before) register rtx pattern, before; { register rtx insn; if (GET_CODE (pattern) == SEQUENCE) insn = emit_insn_before (pattern, before); else { insn = make_jump_insn_raw (pattern); add_insn_before (insn, before); } return insn; } /* Make an instruction with body PATTERN and code CALL_INSN and output it before the instruction BEFORE. */ rtx emit_call_insn_before (pattern, before) register rtx pattern, before; { register rtx insn; if (GET_CODE (pattern) == SEQUENCE) insn = emit_insn_before (pattern, before); else { insn = make_call_insn_raw (pattern); add_insn_before (insn, before); PUT_CODE (insn, CALL_INSN); } return insn; } /* Make an insn of code BARRIER and output it before the insn AFTER. */ rtx emit_barrier_before (before) register rtx before; { register rtx insn = rtx_alloc (BARRIER); INSN_UID (insn) = cur_insn_uid++; add_insn_before (insn, before); return insn; } /* Emit a note of subtype SUBTYPE before the insn BEFORE. */ rtx emit_note_before (subtype, before) int subtype; rtx before; { register rtx note = rtx_alloc (NOTE); INSN_UID (note) = cur_insn_uid++; NOTE_SOURCE_FILE (note) = 0; NOTE_LINE_NUMBER (note) = subtype; add_insn_before (note, before); return note; } /* Make an insn of code INSN with body PATTERN and output it after the insn AFTER. */ rtx emit_insn_after (pattern, after) register rtx pattern, after; { register rtx insn = after; if (GET_CODE (pattern) == SEQUENCE) { register int i; for (i = 0; i < XVECLEN (pattern, 0); i++) { insn = XVECEXP (pattern, 0, i); add_insn_after (insn, after); after = insn; } if (XVECLEN (pattern, 0) < SEQUENCE_RESULT_SIZE) sequence_result[XVECLEN (pattern, 0)] = pattern; } else { insn = make_insn_raw (pattern); add_insn_after (insn, after); } return insn; } /* Similar to emit_insn_after, except that line notes are to be inserted so as to act as if this insn were at FROM. */ void emit_insn_after_with_line_notes (pattern, after, from) rtx pattern, after, from; { rtx from_line = find_line_note (from); rtx after_line = find_line_note (after); rtx insn = emit_insn_after (pattern, after); if (from_line) emit_line_note_after (NOTE_SOURCE_FILE (from_line), NOTE_LINE_NUMBER (from_line), after); if (after_line) emit_line_note_after (NOTE_SOURCE_FILE (after_line), NOTE_LINE_NUMBER (after_line), insn); } /* Make an insn of code JUMP_INSN with body PATTERN and output it after the insn AFTER. */ rtx emit_jump_insn_after (pattern, after) register rtx pattern, after; { register rtx insn; if (GET_CODE (pattern) == SEQUENCE) insn = emit_insn_after (pattern, after); else { insn = make_jump_insn_raw (pattern); add_insn_after (insn, after); } return insn; } /* Make an insn of code BARRIER and output it after the insn AFTER. */ rtx emit_barrier_after (after) register rtx after; { register rtx insn = rtx_alloc (BARRIER); INSN_UID (insn) = cur_insn_uid++; add_insn_after (insn, after); return insn; } /* Emit the label LABEL after the insn AFTER. */ rtx emit_label_after (label, after) rtx label, after; { /* This can be called twice for the same label as a result of the confusion that follows a syntax error! So make it harmless. */ if (INSN_UID (label) == 0) { INSN_UID (label) = cur_insn_uid++; add_insn_after (label, after); } return label; } /* Emit a note of subtype SUBTYPE after the insn AFTER. */ rtx emit_note_after (subtype, after) int subtype; rtx after; { register rtx note = rtx_alloc (NOTE); INSN_UID (note) = cur_insn_uid++; NOTE_SOURCE_FILE (note) = 0; NOTE_LINE_NUMBER (note) = subtype; add_insn_after (note, after); return note; } /* Emit a line note for FILE and LINE after the insn AFTER. */ rtx emit_line_note_after (file, line, after) char *file; int line; rtx after; { register rtx note; if (no_line_numbers && line > 0) { cur_insn_uid++; return 0; } note = rtx_alloc (NOTE); INSN_UID (note) = cur_insn_uid++; NOTE_SOURCE_FILE (note) = file; NOTE_LINE_NUMBER (note) = line; add_insn_after (note, after); return note; } /* Make an insn of code INSN with pattern PATTERN and add it to the end of the doubly-linked list. If PATTERN is a SEQUENCE, take the elements of it and emit an insn for each element. Returns the last insn emitted. */ rtx emit_insn (pattern) rtx pattern; { rtx insn = last_insn; if (GET_CODE (pattern) == SEQUENCE) { register int i; for (i = 0; i < XVECLEN (pattern, 0); i++) { insn = XVECEXP (pattern, 0, i); add_insn (insn); } if (XVECLEN (pattern, 0) < SEQUENCE_RESULT_SIZE) sequence_result[XVECLEN (pattern, 0)] = pattern; } else { insn = make_insn_raw (pattern); add_insn (insn); } return insn; } /* Emit the insns in a chain starting with INSN. Return the last insn emitted. */ rtx emit_insns (insn) rtx insn; { rtx last = 0; while (insn) { rtx next = NEXT_INSN (insn); add_insn (insn); last = insn; insn = next; } return last; } /* Emit the insns in a chain starting with INSN and place them in front of the insn BEFORE. Return the last insn emitted. */ rtx emit_insns_before (insn, before) rtx insn; rtx before; { rtx last = 0; while (insn) { rtx next = NEXT_INSN (insn); add_insn_before (insn, before); last = insn; insn = next; } return last; } /* Emit the insns in a chain starting with FIRST and place them in back of the insn AFTER. Return the last insn emitted. */ rtx emit_insns_after (first, after) register rtx first; register rtx after; { register rtx last; register rtx after_after; if (!after) abort (); if (!first) return first; for (last = first; NEXT_INSN (last); last = NEXT_INSN (last)) continue; after_after = NEXT_INSN (after); NEXT_INSN (after) = first; PREV_INSN (first) = after; NEXT_INSN (last) = after_after; if (after_after) PREV_INSN (after_after) = last; if (after == last_insn) last_insn = last; return last; } /* Make an insn of code JUMP_INSN with pattern PATTERN and add it to the end of the doubly-linked list. */ rtx emit_jump_insn (pattern) rtx pattern; { if (GET_CODE (pattern) == SEQUENCE) return emit_insn (pattern); else { register rtx insn = make_jump_insn_raw (pattern); add_insn (insn); return insn; } } /* Make an insn of code CALL_INSN with pattern PATTERN and add it to the end of the doubly-linked list. */ rtx emit_call_insn (pattern) rtx pattern; { if (GET_CODE (pattern) == SEQUENCE) return emit_insn (pattern); else { register rtx insn = make_call_insn_raw (pattern); add_insn (insn); PUT_CODE (insn, CALL_INSN); return insn; } } /* Add the label LABEL to the end of the doubly-linked list. */ rtx emit_label (label) rtx label; { /* This can be called twice for the same label as a result of the confusion that follows a syntax error! So make it harmless. */ if (INSN_UID (label) == 0) { INSN_UID (label) = cur_insn_uid++; add_insn (label); } return label; } /* Make an insn of code BARRIER and add it to the end of the doubly-linked list. */ rtx emit_barrier () { register rtx barrier = rtx_alloc (BARRIER); INSN_UID (barrier) = cur_insn_uid++; add_insn (barrier); return barrier; } /* Make an insn of code NOTE with data-fields specified by FILE and LINE and add it to the end of the doubly-linked list, but only if line-numbers are desired for debugging info. */ rtx emit_line_note (file, line) char *file; int line; { if (output_bytecode) { /* FIXME: for now we do nothing, but eventually we will have to deal with debugging information. */ return 0; } emit_filename = file; emit_lineno = line; #if 0 if (no_line_numbers) return 0; #endif return emit_note (file, line); } /* Make an insn of code NOTE with data-fields specified by FILE and LINE and add it to the end of the doubly-linked list. If it is a line-number NOTE, omit it if it matches the previous one. */ rtx emit_note (file, line) char *file; int line; { register rtx note; if (line > 0) { if (file && last_filename && !strcmp (file, last_filename) && line == last_linenum) return 0; last_filename = file; last_linenum = line; } if (no_line_numbers && line > 0) { cur_insn_uid++; return 0; } note = rtx_alloc (NOTE); INSN_UID (note) = cur_insn_uid++; NOTE_SOURCE_FILE (note) = file; NOTE_LINE_NUMBER (note) = line; add_insn (note); return note; } /* Emit a NOTE, and don't omit it even if LINE it the previous note. */ rtx emit_line_note_force (file, line) char *file; int line; { last_linenum = -1; return emit_line_note (file, line); } /* Cause next statement to emit a line note even if the line number has not changed. This is used at the beginning of a function. */ void force_next_line_note () { last_linenum = -1; } /* Return an indication of which type of insn should have X as a body. The value is CODE_LABEL, INSN, CALL_INSN or JUMP_INSN. */ enum rtx_code classify_insn (x) rtx x; { if (GET_CODE (x) == CODE_LABEL) return CODE_LABEL; if (GET_CODE (x) == CALL) return CALL_INSN; if (GET_CODE (x) == RETURN) return JUMP_INSN; if (GET_CODE (x) == SET) { if (SET_DEST (x) == pc_rtx) return JUMP_INSN; else if (GET_CODE (SET_SRC (x)) == CALL) return CALL_INSN; else return INSN; } if (GET_CODE (x) == PARALLEL) { register int j; for (j = XVECLEN (x, 0) - 1; j >= 0; j--) if (GET_CODE (XVECEXP (x, 0, j)) == CALL) return CALL_INSN; else if (GET_CODE (XVECEXP (x, 0, j)) == SET && SET_DEST (XVECEXP (x, 0, j)) == pc_rtx) return JUMP_INSN; else if (GET_CODE (XVECEXP (x, 0, j)) == SET && GET_CODE (SET_SRC (XVECEXP (x, 0, j))) == CALL) return CALL_INSN; } return INSN; } /* Emit the rtl pattern X as an appropriate kind of insn. If X is a label, it is simply added into the insn chain. */ rtx emit (x) rtx x; { enum rtx_code code = classify_insn (x); if (code == CODE_LABEL) return emit_label (x); else if (code == INSN) return emit_insn (x); else if (code == JUMP_INSN) { register rtx insn = emit_jump_insn (x); if (simplejump_p (insn) || GET_CODE (x) == RETURN) return emit_barrier (); return insn; } else if (code == CALL_INSN) return emit_call_insn (x); else abort (); } /* Begin emitting insns to a sequence which can be packaged in an RTL_EXPR. */ void start_sequence () { struct sequence_stack *tem; if (sequence_element_free_list) { /* Reuse a previously-saved struct sequence_stack. */ tem = sequence_element_free_list; sequence_element_free_list = tem->next; } else tem = (struct sequence_stack *) permalloc (sizeof (struct sequence_stack)); tem->next = sequence_stack; tem->first = first_insn; tem->last = last_insn; tem->sequence_rtl_expr = sequence_rtl_expr; sequence_stack = tem; first_insn = 0; last_insn = 0; } /* Similarly, but indicate that this sequence will be placed in T, an RTL_EXPR. */ void start_sequence_for_rtl_expr (t) tree t; { start_sequence (); sequence_rtl_expr = t; } /* Set up the insn chain starting with FIRST as the current sequence, saving the previously current one. */ void push_to_sequence (first) rtx first; { rtx last; start_sequence (); for (last = first; last && NEXT_INSN (last); last = NEXT_INSN (last)); first_insn = first; last_insn = last; } /* Set up the outer-level insn chain as the current sequence, saving the previously current one. */ void push_topmost_sequence () { struct sequence_stack *stack, *top; start_sequence (); for (stack = sequence_stack; stack; stack = stack->next) top = stack; first_insn = top->first; last_insn = top->last; sequence_rtl_expr = top->sequence_rtl_expr; } /* After emitting to the outer-level insn chain, update the outer-level insn chain, and restore the previous saved state. */ void pop_topmost_sequence () { struct sequence_stack *stack, *top; for (stack = sequence_stack; stack; stack = stack->next) top = stack; top->first = first_insn; top->last = last_insn; /* ??? Why don't we save sequence_rtl_expr here? */ end_sequence (); } /* After emitting to a sequence, restore previous saved state. To get the contents of the sequence just made, you must call `gen_sequence' *before* calling here. */ void end_sequence () { struct sequence_stack *tem = sequence_stack; first_insn = tem->first; last_insn = tem->last; sequence_rtl_expr = tem->sequence_rtl_expr; sequence_stack = tem->next; tem->next = sequence_element_free_list; sequence_element_free_list = tem; } /* Return 1 if currently emitting into a sequence. */ int in_sequence_p () { return sequence_stack != 0; } /* Generate a SEQUENCE rtx containing the insns already emitted to the current sequence. This is how the gen_... function from a DEFINE_EXPAND constructs the SEQUENCE that it returns. */ rtx gen_sequence () { rtx result; rtx tem; int i; int len; /* Count the insns in the chain. */ len = 0; for (tem = first_insn; tem; tem = NEXT_INSN (tem)) len++; /* If only one insn, return its pattern rather than a SEQUENCE. (Now that we cache SEQUENCE expressions, it isn't worth special-casing the case of an empty list.) */ if (len == 1 && (GET_CODE (first_insn) == INSN || GET_CODE (first_insn) == JUMP_INSN /* Don't discard the call usage field. */ || (GET_CODE (first_insn) == CALL_INSN && CALL_INSN_FUNCTION_USAGE (first_insn) == NULL_RTX))) return PATTERN (first_insn); /* Put them in a vector. See if we already have a SEQUENCE of the appropriate length around. */ if (len < SEQUENCE_RESULT_SIZE && (result = sequence_result[len]) != 0) sequence_result[len] = 0; else { /* Ensure that this rtl goes in saveable_obstack, since we may cache it. */ push_obstacks_nochange (); rtl_in_saveable_obstack (); result = gen_rtx (SEQUENCE, VOIDmode, rtvec_alloc (len)); pop_obstacks (); } for (i = 0, tem = first_insn; tem; tem = NEXT_INSN (tem), i++) XVECEXP (result, 0, i) = tem; return result; } /* Set up regno_reg_rtx, reg_rtx_no and regno_pointer_flag according to the chain of insns starting with FIRST. Also set cur_insn_uid to exceed the largest uid in that chain. This is used when an inline function's rtl is saved and passed to rest_of_compilation later. */ static void restore_reg_data_1 (); void restore_reg_data (first) rtx first; { register rtx insn; int i; register int max_uid = 0; for (insn = first; insn; insn = NEXT_INSN (insn)) { if (INSN_UID (insn) >= max_uid) max_uid = INSN_UID (insn); switch (GET_CODE (insn)) { case NOTE: case CODE_LABEL: case BARRIER: break; case JUMP_INSN: case CALL_INSN: case INSN: restore_reg_data_1 (PATTERN (insn)); break; } } /* Don't duplicate the uids already in use. */ cur_insn_uid = max_uid + 1; /* If any regs are missing, make them up. ??? word_mode is not necessarily the right mode. Most likely these REGs are never used. At some point this should be checked. */ for (i = FIRST_PSEUDO_REGISTER; i < reg_rtx_no; i++) if (regno_reg_rtx[i] == 0) regno_reg_rtx[i] = gen_rtx (REG, word_mode, i); } static void restore_reg_data_1 (orig) rtx orig; { register rtx x = orig; register int i; register enum rtx_code code; register char *format_ptr; code = GET_CODE (x); switch (code) { case QUEUED: case CONST_INT: case CONST_DOUBLE: case SYMBOL_REF: case CODE_LABEL: case PC: case CC0: case LABEL_REF: return; case REG: if (REGNO (x) >= FIRST_PSEUDO_REGISTER) { /* Make sure regno_pointer_flag and regno_reg_rtx are large enough to have an element for this pseudo reg number. */ if (REGNO (x) >= reg_rtx_no) { reg_rtx_no = REGNO (x); if (reg_rtx_no >= regno_pointer_flag_length) { int newlen = MAX (regno_pointer_flag_length * 2, reg_rtx_no + 30); rtx *new1; char *new = (char *) oballoc (newlen); bzero (new, newlen); bcopy (regno_pointer_flag, new, regno_pointer_flag_length); new1 = (rtx *) oballoc (newlen * sizeof (rtx)); bzero ((char *) new1, newlen * sizeof (rtx)); bcopy ((char *) regno_reg_rtx, (char *) new1, regno_pointer_flag_length * sizeof (rtx)); regno_pointer_flag = new; regno_reg_rtx = new1; regno_pointer_flag_length = newlen; } reg_rtx_no ++; } regno_reg_rtx[REGNO (x)] = x; } return; case MEM: if (GET_CODE (XEXP (x, 0)) == REG) mark_reg_pointer (XEXP (x, 0)); restore_reg_data_1 (XEXP (x, 0)); return; } /* Now scan the subexpressions recursively. */ format_ptr = GET_RTX_FORMAT (code); for (i = 0; i < GET_RTX_LENGTH (code); i++) { switch (*format_ptr++) { case 'e': restore_reg_data_1 (XEXP (x, i)); break; case 'E': if (XVEC (x, i) != NULL) { register int j; for (j = 0; j < XVECLEN (x, i); j++) restore_reg_data_1 (XVECEXP (x, i, j)); } break; } } } /* Initialize data structures and variables in this file before generating rtl for each function. */ void init_emit () { int i; first_insn = NULL; last_insn = NULL; sequence_rtl_expr = NULL; cur_insn_uid = 1; reg_rtx_no = LAST_VIRTUAL_REGISTER + 1; last_linenum = 0; last_filename = 0; first_label_num = label_num; last_label_num = 0; sequence_stack = NULL; /* Clear the start_sequence/gen_sequence cache. */ sequence_element_free_list = 0; for (i = 0; i < SEQUENCE_RESULT_SIZE; i++) sequence_result[i] = 0; /* Init the tables that describe all the pseudo regs. */ regno_pointer_flag_length = LAST_VIRTUAL_REGISTER + 101; regno_pointer_flag = (char *) oballoc (regno_pointer_flag_length); bzero (regno_pointer_flag, regno_pointer_flag_length); regno_reg_rtx = (rtx *) oballoc (regno_pointer_flag_length * sizeof (rtx)); bzero ((char *) regno_reg_rtx, regno_pointer_flag_length * sizeof (rtx)); /* Put copies of all the virtual register rtx into regno_reg_rtx. */ regno_reg_rtx[VIRTUAL_INCOMING_ARGS_REGNUM] = virtual_incoming_args_rtx; regno_reg_rtx[VIRTUAL_STACK_VARS_REGNUM] = virtual_stack_vars_rtx; regno_reg_rtx[VIRTUAL_STACK_DYNAMIC_REGNUM] = virtual_stack_dynamic_rtx; regno_reg_rtx[VIRTUAL_OUTGOING_ARGS_REGNUM] = virtual_outgoing_args_rtx; /* Indicate that the virtual registers and stack locations are all pointers. */ REGNO_POINTER_FLAG (STACK_POINTER_REGNUM) = 1; REGNO_POINTER_FLAG (FRAME_POINTER_REGNUM) = 1; REGNO_POINTER_FLAG (HARD_FRAME_POINTER_REGNUM) = 1; REGNO_POINTER_FLAG (ARG_POINTER_REGNUM) = 1; REGNO_POINTER_FLAG (VIRTUAL_INCOMING_ARGS_REGNUM) = 1; REGNO_POINTER_FLAG (VIRTUAL_STACK_VARS_REGNUM) = 1; REGNO_POINTER_FLAG (VIRTUAL_STACK_DYNAMIC_REGNUM) = 1; REGNO_POINTER_FLAG (VIRTUAL_OUTGOING_ARGS_REGNUM) = 1; #ifdef INIT_EXPANDERS INIT_EXPANDERS; #endif } /* Create some permanent unique rtl objects shared between all functions. LINE_NUMBERS is nonzero if line numbers are to be generated. */ void init_emit_once (line_numbers) int line_numbers; { int i; enum machine_mode mode; no_line_numbers = ! line_numbers; sequence_stack = NULL; /* Compute the word and byte modes. */ byte_mode = VOIDmode; word_mode = VOIDmode; for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) { if (GET_MODE_BITSIZE (mode) == BITS_PER_UNIT && byte_mode == VOIDmode) byte_mode = mode; if (GET_MODE_BITSIZE (mode) == BITS_PER_WORD && word_mode == VOIDmode) word_mode = mode; } ptr_mode = mode_for_size (POINTER_SIZE, GET_MODE_CLASS (Pmode), 0); /* Create the unique rtx's for certain rtx codes and operand values. */ pc_rtx = gen_rtx (PC, VOIDmode); cc0_rtx = gen_rtx (CC0, VOIDmode); /* Don't use gen_rtx here since gen_rtx in this case tries to use these variables. */ for (i = - MAX_SAVED_CONST_INT; i <= MAX_SAVED_CONST_INT; i++) { const_int_rtx[i + MAX_SAVED_CONST_INT] = rtx_alloc (CONST_INT); PUT_MODE (const_int_rtx[i + MAX_SAVED_CONST_INT], VOIDmode); INTVAL (const_int_rtx[i + MAX_SAVED_CONST_INT]) = i; } /* These four calls obtain some of the rtx expressions made above. */ const0_rtx = GEN_INT (0); const1_rtx = GEN_INT (1); const2_rtx = GEN_INT (2); constm1_rtx = GEN_INT (-1); /* This will usually be one of the above constants, but may be a new rtx. */ const_true_rtx = GEN_INT (STORE_FLAG_VALUE); dconst0 = REAL_VALUE_ATOF ("0", DFmode); dconst1 = REAL_VALUE_ATOF ("1", DFmode); dconst2 = REAL_VALUE_ATOF ("2", DFmode); dconstm1 = REAL_VALUE_ATOF ("-1", DFmode); for (i = 0; i <= 2; i++) { for (mode = GET_CLASS_NARROWEST_MODE (MODE_FLOAT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) { rtx tem = rtx_alloc (CONST_DOUBLE); union real_extract u; bzero ((char *) &u, sizeof u); /* Zero any holes in a structure. */ u.d = i == 0 ? dconst0 : i == 1 ? dconst1 : dconst2; bcopy ((char *) &u, (char *) &CONST_DOUBLE_LOW (tem), sizeof u); CONST_DOUBLE_MEM (tem) = cc0_rtx; PUT_MODE (tem, mode); const_tiny_rtx[i][(int) mode] = tem; } const_tiny_rtx[i][(int) VOIDmode] = GEN_INT (i); for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) const_tiny_rtx[i][(int) mode] = GEN_INT (i); for (mode = GET_CLASS_NARROWEST_MODE (MODE_PARTIAL_INT); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) const_tiny_rtx[i][(int) mode] = GEN_INT (i); } for (mode = GET_CLASS_NARROWEST_MODE (MODE_CC); mode != VOIDmode; mode = GET_MODE_WIDER_MODE (mode)) const_tiny_rtx[0][(int) mode] = const0_rtx; stack_pointer_rtx = gen_rtx (REG, Pmode, STACK_POINTER_REGNUM); frame_pointer_rtx = gen_rtx (REG, Pmode, FRAME_POINTER_REGNUM); if (HARD_FRAME_POINTER_REGNUM == FRAME_POINTER_REGNUM) hard_frame_pointer_rtx = frame_pointer_rtx; else hard_frame_pointer_rtx = gen_rtx (REG, Pmode, HARD_FRAME_POINTER_REGNUM); if (FRAME_POINTER_REGNUM == ARG_POINTER_REGNUM) arg_pointer_rtx = frame_pointer_rtx; else if (HARD_FRAME_POINTER_REGNUM == ARG_POINTER_REGNUM) arg_pointer_rtx = hard_frame_pointer_rtx; else if (STACK_POINTER_REGNUM == ARG_POINTER_REGNUM) arg_pointer_rtx = stack_pointer_rtx; else arg_pointer_rtx = gen_rtx (REG, Pmode, ARG_POINTER_REGNUM); /* Create the virtual registers. Do so here since the following objects might reference them. */ virtual_incoming_args_rtx = gen_rtx (REG, Pmode, VIRTUAL_INCOMING_ARGS_REGNUM); virtual_stack_vars_rtx = gen_rtx (REG, Pmode, VIRTUAL_STACK_VARS_REGNUM); virtual_stack_dynamic_rtx = gen_rtx (REG, Pmode, VIRTUAL_STACK_DYNAMIC_REGNUM); virtual_outgoing_args_rtx = gen_rtx (REG, Pmode, VIRTUAL_OUTGOING_ARGS_REGNUM); #ifdef STRUCT_VALUE struct_value_rtx = STRUCT_VALUE; #else struct_value_rtx = gen_rtx (REG, Pmode, STRUCT_VALUE_REGNUM); #endif #ifdef STRUCT_VALUE_INCOMING struct_value_incoming_rtx = STRUCT_VALUE_INCOMING; #else #ifdef STRUCT_VALUE_INCOMING_REGNUM struct_value_incoming_rtx = gen_rtx (REG, Pmode, STRUCT_VALUE_INCOMING_REGNUM); #else struct_value_incoming_rtx = struct_value_rtx; #endif #endif #ifdef STATIC_CHAIN_REGNUM static_chain_rtx = gen_rtx (REG, Pmode, STATIC_CHAIN_REGNUM); #ifdef STATIC_CHAIN_INCOMING_REGNUM if (STATIC_CHAIN_INCOMING_REGNUM != STATIC_CHAIN_REGNUM) static_chain_incoming_rtx = gen_rtx (REG, Pmode, STATIC_CHAIN_INCOMING_REGNUM); else #endif static_chain_incoming_rtx = static_chain_rtx; #endif #ifdef STATIC_CHAIN static_chain_rtx = STATIC_CHAIN; #ifdef STATIC_CHAIN_INCOMING static_chain_incoming_rtx = STATIC_CHAIN_INCOMING; #else static_chain_incoming_rtx = static_chain_rtx; #endif #endif #ifdef PIC_OFFSET_TABLE_REGNUM pic_offset_table_rtx = gen_rtx (REG, Pmode, PIC_OFFSET_TABLE_REGNUM); #endif }