source: trunk/third/gcc/gcc.info-9 @ 8834

This is Info file gcc.info, produced by Makeinfo-1.55 from the input
file gcc.texi.

   This file documents the use and the internals of the GNU compiler.

   Published by the Free Software Foundation 59 Temple Place - Suite 330
Boston, MA 02111-1307 USA

   Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995 Free Software
Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "GNU General Public License," "Funding for
Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are
included exactly as in the original, and provided that the entire
resulting derived work is distributed under the terms of a permission
notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the sections entitled "GNU General Public
License," "Funding for Free Software," and "Protect Your Freedom--Fight
`Look And Feel'", and this permission notice, may be included in
translations approved by the Free Software Foundation instead of in the
original English.


File: gcc.info,  Node: Constructors,  Next: Labeled Elements,  Prev: Initializers,  Up: C Extensions

Constructor Expressions
=======================

   GNU C supports constructor expressions.  A constructor looks like a
cast containing an initializer.  Its value is an object of the type
specified in the cast, containing the elements specified in the
initializer.

   Usually, the specified type is a structure.  Assume that `struct
foo' and `structure' are declared as shown:

     struct foo {int a; char b[2];} structure;

Here is an example of constructing a `struct foo' with a constructor:

     structure = ((struct foo) {x + y, 'a', 0});

This is equivalent to writing the following:

     {
       struct foo temp = {x + y, 'a', 0};
       structure = temp;
     }

   You can also construct an array.  If all the elements of the
constructor are (made up of) simple constant expressions, suitable for
use in initializers, then the constructor is an lvalue and can be
coerced to a pointer to its first element, as shown here:

     char **foo = (char *[]) { "x", "y", "z" };

   Array constructors whose elements are not simple constants are not
very useful, because the constructor is not an lvalue.  There are only
two valid ways to use it: to subscript it, or initialize an array
variable with it.  The former is probably slower than a `switch'
statement, while the latter does the same thing an ordinary C
initializer would do.  Here is an example of subscripting an array
constructor:

     output = ((int[]) { 2, x, 28 }) [input];

   Constructor expressions for scalar types and union types are is also
allowed, but then the constructor expression is equivalent to a cast.


File: gcc.info,  Node: Labeled Elements,  Next: Cast to Union,  Prev: Constructors,  Up: C Extensions

Labeled Elements in Initializers
================================

   Standard C requires the elements of an initializer to appear in a
fixed order, the same as the order of the elements in the array or
structure being initialized.

   In GNU C you can give the elements in any order, specifying the array
indices or structure field names they apply to.  This extension is not
implemented in GNU C++.

   To specify an array index, write `[INDEX]' or `[INDEX] =' before the
element value.  For example,

     int a[6] = { [4] 29, [2] = 15 };

is equivalent to

     int a[6] = { 0, 0, 15, 0, 29, 0 };

The index values must be constant expressions, even if the array being
initialized is automatic.

   To initialize a range of elements to the same value, write `[FIRST
... LAST] = VALUE'.  For example,

     int widths[] = { [0 ... 9] = 1, [10 ... 99] = 2, [100] = 3 };

Note that the length of the array is the highest value specified plus
one.

   In a structure initializer, specify the name of a field to initialize
with `FIELDNAME:' before the element value.  For example, given the
following structure,

     struct point { int x, y; };

the following initialization

     struct point p = { y: yvalue, x: xvalue };

is equivalent to

     struct point p = { xvalue, yvalue };

   Another syntax which has the same meaning is `.FIELDNAME ='., as
shown here:

     struct point p = { .y = yvalue, .x = xvalue };

   You can also use an element label (with either the colon syntax or
the period-equal syntax) when initializing a union, to specify which
element of the union should be used.  For example,

     union foo { int i; double d; };
     
     union foo f = { d: 4 };

will convert 4 to a `double' to store it in the union using the second
element.  By contrast, casting 4 to type `union foo' would store it
into the union as the integer `i', since it is an integer.  (*Note Cast
to Union::.)

   You can combine this technique of naming elements with ordinary C
initialization of successive elements.  Each initializer element that
does not have a label applies to the next consecutive element of the
array or structure.  For example,

     int a[6] = { [1] = v1, v2, [4] = v4 };

is equivalent to

     int a[6] = { 0, v1, v2, 0, v4, 0 };

   Labeling the elements of an array initializer is especially useful
when the indices are characters or belong to an `enum' type.  For
example:

     int whitespace[256]
       = { [' '] = 1, ['\t'] = 1, ['\h'] = 1,
           ['\f'] = 1, ['\n'] = 1, ['\r'] = 1 };


File: gcc.info,  Node: Case Ranges,  Next: Function Attributes,  Prev: Cast to Union,  Up: C Extensions

Case Ranges
===========

   You can specify a range of consecutive values in a single `case'
label, like this:

     case LOW ... HIGH:

This has the same effect as the proper number of individual `case'
labels, one for each integer value from LOW to HIGH, inclusive.

   This feature is especially useful for ranges of ASCII character
codes:

     case 'A' ... 'Z':

   *Be careful:* Write spaces around the `...', for otherwise it may be
parsed wrong when you use it with integer values.  For example, write
this:

     case 1 ... 5:

rather than this:

     case 1...5:


File: gcc.info,  Node: Cast to Union,  Next: Case Ranges,  Prev: Labeled Elements,  Up: C Extensions

Cast to a Union Type
====================

   A cast to union type is similar to other casts, except that the type
specified is a union type.  You can specify the type either with `union
TAG' or with a typedef name.  A cast to union is actually a constructor
though, not a cast, and hence does not yield an lvalue like normal
casts.  (*Note Constructors::.)

   The types that may be cast to the union type are those of the members
of the union.  Thus, given the following union and variables:

     union foo { int i; double d; };
     int x;
     double y;

both `x' and `y' can be cast to type `union' foo.

   Using the cast as the right-hand side of an assignment to a variable
of union type is equivalent to storing in a member of the union:

     union foo u;
     ...
     u = (union foo) x  ==  u.i = x
     u = (union foo) y  ==  u.d = y

   You can also use the union cast as a function argument:

     void hack (union foo);
     ...
     hack ((union foo) x);


File: gcc.info,  Node: Function Attributes,  Next: Function Prototypes,  Prev: Case Ranges,  Up: C Extensions

Declaring Attributes of Functions
=================================

   In GNU C, you declare certain things about functions called in your
program which help the compiler optimize function calls and check your
code more carefully.

   The keyword `__attribute__' allows you to specify special attributes
when making a declaration.  This keyword is followed by an attribute
specification inside double parentheses.  Eight attributes, `noreturn',
`const', `format', `section', `constructor', `destructor', `unused' and
`weak' are currently defined for functions.  Other attributes, including
`section' are supported for variables declarations (*note Variable
Attributes::.) and for types (*note Type Attributes::.).

   You may also specify attributes with `__' preceding and following
each keyword.  This allows you to use them in header files without
being concerned about a possible macro of the same name.  For example,
you may use `__noreturn__' instead of `noreturn'.

`noreturn'
     A few standard library functions, such as `abort' and `exit',
     cannot return.  GNU CC knows this automatically.  Some programs
     define their own functions that never return.  You can declare them
     `noreturn' to tell the compiler this fact.  For example,

          void fatal () __attribute__ ((noreturn));
          
          void
          fatal (...)
          {
            ... /* Print error message. */ ...
            exit (1);
          }

     The `noreturn' keyword tells the compiler to assume that `fatal'
     cannot return.  It can then optimize without regard to what would
     happen if `fatal' ever did return.  This makes slightly better
     code.  More importantly, it helps avoid spurious warnings of
     uninitialized variables.

     Do not assume that registers saved by the calling function are
     restored before calling the `noreturn' function.

     It does not make sense for a `noreturn' function to have a return
     type other than `void'.

     The attribute `noreturn' is not implemented in GNU C versions
     earlier than 2.5.  An alternative way to declare that a function
     does not return, which works in the current version and in some
     older versions, is as follows:

          typedef void voidfn ();
          
          volatile voidfn fatal;

`const'
     Many functions do not examine any values except their arguments,
     and have no effects except the return value.  Such a function can
     be subject to common subexpression elimination and loop
     optimization just as an arithmetic operator would be.  These
     functions should be declared with the attribute `const'.  For
     example,

          int square (int) __attribute__ ((const));

     says that the hypothetical function `square' is safe to call fewer
     times than the program says.

     The attribute `const' is not implemented in GNU C versions earlier
     than 2.5.  An alternative way to declare that a function has no
     side effects, which works in the current version and in some older
     versions, is as follows:

          typedef int intfn ();
          
          extern const intfn square;

     This approach does not work in GNU C++ from 2.6.0 on, since the
     language specifies that the `const' must be attached to the return
     value.

     Note that a function that has pointer arguments and examines the
     data pointed to must *not* be declared `const'.  Likewise, a
     function that calls a non-`const' function usually must not be
     `const'.  It does not make sense for a `const' function to return
     `void'.

`format (ARCHETYPE, STRING-INDEX, FIRST-TO-CHECK)'
     The `format' attribute specifies that a function takes `printf' or
     `scanf' style arguments which should be type-checked against a
     format string.  For example, the declaration:

          extern int
          my_printf (void *my_object, const char *my_format, ...)
                __attribute__ ((format (printf, 2, 3)));

     causes the compiler to check the arguments in calls to `my_printf'
     for consistency with the `printf' style format string argument
     `my_format'.

     The parameter ARCHETYPE determines how the format string is
     interpreted, and should be either `printf' or `scanf'.  The
     parameter STRING-INDEX specifies which argument is the format
     string argument (starting from 1), while FIRST-TO-CHECK is the
     number of the first argument to check against the format string.
     For functions where the arguments are not available to be checked
     (such as `vprintf'), specify the third parameter as zero.  In this
     case the compiler only checks the format string for consistency.

     In the example above, the format string (`my_format') is the second
     argument of the function `my_print', and the arguments to check
     start with the third argument, so the correct parameters for the
     format attribute are 2 and 3.

     The `format' attribute allows you to identify your own functions
     which take format strings as arguments, so that GNU CC can check
     the calls to these functions for errors.  The compiler always
     checks formats for the ANSI library functions `printf', `fprintf',
     `sprintf', `scanf', `fscanf', `sscanf', `vprintf', `vfprintf' and
     `vsprintf' whenever such warnings are requested (using
     `-Wformat'), so there is no need to modify the header file
     `stdio.h'.

`section ("section-name")'
     Normally, the compiler places the code it generates in the `text'
     section.  Sometimes, however, you need additional sections, or you
     need certain particular functions to appear in special sections.
     The `section' attribute specifies that a function lives in a
     particular section.  For example, the declaration:

          extern void foobar (void) __attribute__ ((section ("bar")));

     puts the function `foobar' in the `bar' section.

     Some file formats do not support arbitrary sections so the
     `section' attribute is not available on all platforms.  If you
     need to map the entire contents of a module to a particular
     section, consider using the facilities of the linker instead.

`constructor'
`destructor'
     The `constructor' attribute causes the function to be called
     automatically before execution enters `main ()'.  Similarly, the
     `destructor' attribute causes the function to be called
     automatically after `main ()' has completed or `exit ()' has been
     called.  Functions with these attributes are useful for
     initializing data that will be used implicitly during the
     execution of the program.

     These attributes are not currently implemented for Objective C.

`unused'
     This attribute, attached to a function, means that the function is
     meant to be possibly unused.  GNU CC will not produce a warning
     for this function.

`weak'
     The `weak' attribute causes the declaration to be emitted as a weak
     symbol rather than a global.  This is primarily useful in defining
     library functions which can be overridden in user code, though it
     can also be used with non-function declarations.  Weak symbols are
     supported for ELF targets, and also for a.out targets when using
     the GNU assembler and linker.

`alias ("target")'
     The `alias' attribute causes the declaration to be emitted as an
     alias for another symbol, which must be specified.  For instance,

          void __f () { /* do something */; }
          void f () __attribute__ ((weak, alias ("__f")));

     declares `f' to be a weak alias for `__f'.  In C++, the mangled
     name for the target must be used.

`regparm (NUMBER)'
     On the Intel 386, the `regparm' attribute causes the compiler to
     pass up to NUMBER integer arguments in registers EAX, EDX, and ECX
     instead of on the stack.  Functions that take a variable number of
     arguments will continue to be passed all of their arguments on the
     stack.

`stdcall'
     On the Intel 386, the `stdcall' attribute causes the compiler to
     assume that the called function will pop off the stack space used
     to pass arguments, unless it takes a variable number of arguments.

`cdecl'
     On the Intel 386, the `cdecl' attribute causes the compiler to
     assume that the called function will pop off the stack space used
     to pass arguments, unless it takes a variable number of arguments.
     This is useful to override the effects of the `-mrtd' switch.

   You can specify multiple attributes in a declaration by separating
them by commas within the double parentheses or by immediately
following an attribute declaration with another attribute declaration.

   Some people object to the `__attribute__' feature, suggesting that
ANSI C's `#pragma' should be used instead.  There are two reasons for
not doing this.

  1. It is impossible to generate `#pragma' commands from a macro.

  2. There is no telling what the same `#pragma' might mean in another
     compiler.

   These two reasons apply to almost any application that might be
proposed for `#pragma'.  It is basically a mistake to use `#pragma' for
*anything*.


File: gcc.info,  Node: Function Prototypes,  Next: C++ Comments,  Prev: Function Attributes,  Up: C Extensions

Prototypes and Old-Style Function Definitions
=============================================

   GNU C extends ANSI C to allow a function prototype to override a
later old-style non-prototype definition.  Consider the following
example:

     /* Use prototypes unless the compiler is old-fashioned.  */
     #if __STDC__
     #define P(x) x
     #else
     #define P(x) ()
     #endif
     
     /* Prototype function declaration.  */
     int isroot P((uid_t));
     
     /* Old-style function definition.  */
     int
     isroot (x)   /* ??? lossage here ??? */
          uid_t x;
     {
       return x == 0;
     }

   Suppose the type `uid_t' happens to be `short'.  ANSI C does not
allow this example, because subword arguments in old-style
non-prototype definitions are promoted.  Therefore in this example the
function definition's argument is really an `int', which does not match
the prototype argument type of `short'.

   This restriction of ANSI C makes it hard to write code that is
portable to traditional C compilers, because the programmer does not
know whether the `uid_t' type is `short', `int', or `long'.  Therefore,
in cases like these GNU C allows a prototype to override a later
old-style definition.  More precisely, in GNU C, a function prototype
argument type overrides the argument type specified by a later
old-style definition if the former type is the same as the latter type
before promotion.  Thus in GNU C the above example is equivalent to the
following:

     int isroot (uid_t);
     
     int
     isroot (uid_t x)
     {
       return x == 0;
     }

   GNU C++ does not support old-style function definitions, so this
extension is irrelevant.


File: gcc.info,  Node: C++ Comments,  Next: Dollar Signs,  Prev: Function Prototypes,  Up: C Extensions

C++ Style Comments
==================

   In GNU C, you may use C++ style comments, which start with `//' and
continue until the end of the line.  Many other C implementations allow
such comments, and they are likely to be in a future C standard.
However, C++ style comments are not recognized if you specify `-ansi'
or `-traditional', since they are incompatible with traditional
constructs like `dividend//*comment*/divisor'.


File: gcc.info,  Node: Dollar Signs,  Next: Character Escapes,  Prev: C++ Comments,  Up: C Extensions

Dollar Signs in Identifier Names
================================

   In GNU C, you may use dollar signs in identifier names.  This is
because many traditional C implementations allow such identifiers.

   On some machines, dollar signs are allowed in identifiers if you
specify `-traditional'.  On a few systems they are allowed by default,
even if you do not use `-traditional'.  But they are never allowed if
you specify `-ansi'.

   There are certain ANSI C programs (obscure, to be sure) that would
compile incorrectly if dollar signs were permitted in identifiers.  For
example:

     #define foo(a) #a
     #define lose(b) foo (b)
     #define test$
     lose (test)


File: gcc.info,  Node: Character Escapes,  Next: Variable Attributes,  Prev: Dollar Signs,  Up: C Extensions

The Character ESC in Constants
==============================

   You can use the sequence `\e' in a string or character constant to
stand for the ASCII character ESC.


File: gcc.info,  Node: Alignment,  Next: Inline,  Prev: Type Attributes,  Up: C Extensions

Inquiring on Alignment of Types or Variables
============================================

   The keyword `__alignof__' allows you to inquire about how an object
is aligned, or the minimum alignment usually required by a type.  Its
syntax is just like `sizeof'.

   For example, if the target machine requires a `double' value to be
aligned on an 8-byte boundary, then `__alignof__ (double)' is 8.  This
is true on many RISC machines.  On more traditional machine designs,
`__alignof__ (double)' is 4 or even 2.

   Some machines never actually require alignment; they allow reference
to any data type even at an odd addresses.  For these machines,
`__alignof__' reports the *recommended* alignment of a type.

   When the operand of `__alignof__' is an lvalue rather than a type,
the value is the largest alignment that the lvalue is known to have.
It may have this alignment as a result of its data type, or because it
is part of a structure and inherits alignment from that structure.  For
example, after this declaration:

     struct foo { int x; char y; } foo1;

the value of `__alignof__ (foo1.y)' is probably 2 or 4, the same as
`__alignof__ (int)', even though the data type of `foo1.y' does not
itself demand any alignment.

   A related feature which lets you specify the alignment of an object
is `__attribute__ ((aligned (ALIGNMENT)))'; see the following section.


File: gcc.info,  Node: Variable Attributes,  Next: Type Attributes,  Prev: Character Escapes,  Up: C Extensions

Specifying Attributes of Variables
==================================

   The keyword `__attribute__' allows you to specify special attributes
of variables or structure fields.  This keyword is followed by an
attribute specification inside double parentheses.  Eight attributes
are currently defined for variables: `aligned', `mode', `nocommon',
`packed', `section', `transparent_union', `unused', and `weak'.  Other
attributes are available for functions (*note Function Attributes::.)
and for types (*note Type Attributes::.).

   You may also specify attributes with `__' preceding and following
each keyword.  This allows you to use them in header files without
being concerned about a possible macro of the same name.  For example,
you may use `__aligned__' instead of `aligned'.

`aligned (ALIGNMENT)'
     This attribute specifies a minimum alignment for the variable or
     structure field, measured in bytes.  For example, the declaration:

          int x __attribute__ ((aligned (16))) = 0;

     causes the compiler to allocate the global variable `x' on a
     16-byte boundary.  On a 68040, this could be used in conjunction
     with an `asm' expression to access the `move16' instruction which
     requires 16-byte aligned operands.

     You can also specify the alignment of structure fields.  For
     example, to create a double-word aligned `int' pair, you could
     write:

          struct foo { int x[2] __attribute__ ((aligned (8))); };

     This is an alternative to creating a union with a `double' member
     that forces the union to be double-word aligned.

     It is not possible to specify the alignment of functions; the
     alignment of functions is determined by the machine's requirements
     and cannot be changed.  You cannot specify alignment for a typedef
     name because such a name is just an alias, not a distinct type.

     As in the preceding examples, you can explicitly specify the
     alignment (in bytes) that you wish the compiler to use for a given
     variable or structure field.  Alternatively, you can leave out the
     alignment factor and just ask the compiler to align a variable or
     field to the maximum useful alignment for the target machine you
     are compiling for.  For example, you could write:

          short array[3] __attribute__ ((aligned));

     Whenever you leave out the alignment factor in an `aligned'
     attribute specification, the compiler automatically sets the
     alignment for the declared variable or field to the largest
     alignment which is ever used for any data type on the target
     machine you are compiling for.  Doing this can often make copy
     operations more efficient, because the compiler can use whatever
     instructions copy the biggest chunks of memory when performing
     copies to or from the variables or fields that you have aligned
     this way.

     The `aligned' attribute can only increase the alignment; but you
     can decrease it by specifying `packed' as well.  See below.

     Note that the effectiveness of `aligned' attributes may be limited
     by inherent limitations in your linker.  On many systems, the
     linker is only able to arrange for variables to be aligned up to a
     certain maximum alignment.  (For some linkers, the maximum
     supported alignment may be very very small.)  If your linker is
     only able to align variables up to a maximum of 8 byte alignment,
     then specifying `aligned(16)' in an `__attribute__' will still
     only provide you with 8 byte alignment.  See your linker
     documentation for further information.

`mode (MODE)'
     This attribute specifies the data type for the
     declaration--whichever type corresponds to the mode MODE.  This in
     effect lets you request an integer or floating point type
     according to its width.

     You may also specify a mode of `byte' or `__byte__' to indicate
     the mode corresponding to a one-byte integer, `word' or `__word__'
     for the mode of a one-word integer, and `pointer' or `__pointer__'
     for the mode used to represent pointers.

`nocommon'
     This attribute specifies requests GNU CC not to place a variable
     "common" but instead to allocate space for it directly.  If you
     specify the `-fno-common' flag, GNU CC will do this for all
     variables.

     Specifying the `nocommon' attribute for a variable provides an
     initialization of zeros.  A variable may only be initialized in one
     source file.

`packed'
     The `packed' attribute specifies that a variable or structure field
     should have the smallest possible alignment--one byte for a
     variable, and one bit for a field, unless you specify a larger
     value with the `aligned' attribute.

     Here is a structure in which the field `x' is packed, so that it
     immediately follows `a':

          struct foo
          {
            char a;
            int x[2] __attribute__ ((packed));
          };

`section ("section-name")'
     Normally, the compiler places the objects it generates in sections
     like `data' and `bss'.  Sometimes, however, you need additional
     sections, or you need certain particular variables to appear in
     special sections, for example to map to special hardware.  The
     `section' attribute specifies that a variable (or function) lives
     in a particular section.  For example, this small program uses
     several specific section names:

          struct duart a __attribute__ ((section ("DUART_A"))) = { 0 };
          struct duart b __attribute__ ((section ("DUART_B"))) = { 0 };
          char stack[10000] __attribute__ ((section ("STACK"))) = { 0 };
          int init_data_copy __attribute__ ((section ("INITDATACOPY"))) = 0;
          
          main()
          {
            /* Initialize stack pointer */
            init_sp (stack + sizeof (stack));
          
            /* Initialize initialized data */
            memcpy (&init_data_copy, &data, &edata - &data);
          
            /* Turn on the serial ports */
            init_duart (&a);
            init_duart (&b);
          }

     Use the `section' attribute with an *initialized* definition of a
     *global* variable, as shown in the example.  GNU CC issues a
     warning and otherwise ignores the `section' attribute in
     uninitialized variable declarations.

     You may only use the `section' attribute with a fully initialized
     global definition because of the way linkers work.  The linker
     requires each object be defined once, with the exception that
     uninitialized variables tentatively go in the `common' (or `bss')
     section and can be multiply "defined".  You can force a variable
     to be initialized with the `-fno-common' flag or the `nocommon'
     attribute.

     Some file formats do not support arbitrary sections so the
     `section' attribute is not available on all platforms.  If you
     need to map the entire contents of a module to a particular
     section, consider using the facilities of the linker instead.

`transparent_union'
     This attribute, attached to a function argument variable which is a
     union, means to pass the argument in the same way that the first
     union member would be passed.  You can also use this attribute on a
     `typedef' for a union data type; then it applies to all function
     arguments with that type.

`unused'
     This attribute, attached to a variable, means that the variable is
     meant to be possibly unused.  GNU CC will not produce a warning
     for this variable.

`weak'
     The `weak' attribute is described in *Note Function Attributes::.

   To specify multiple attributes, separate them by commas within the
double parentheses: for example, `__attribute__ ((aligned (16),
packed))'.


File: gcc.info,  Node: Type Attributes,  Next: Alignment,  Prev: Variable Attributes,  Up: C Extensions

Specifying Attributes of Types
==============================

   The keyword `__attribute__' allows you to specify special attributes
of `struct' and `union' types when you define such types.  This keyword
is followed by an attribute specification inside double parentheses.
Three attributes are currently defined for types: `aligned', `packed',
and `transparent_union'.  Other attributes are defined for functions
(*note Function Attributes::.) and for variables (*note Variable
Attributes::.).

   You may also specify any one of these attributes with `__' preceding
and following its keyword.  This allows you to use these attributes in
header files without being concerned about a possible macro of the same
name.  For example, you may use `__aligned__' instead of `aligned'.

   You may specify the `aligned' and `transparent_union' attributes
either in a `typedef' declaration or just past the closing curly brace
of a complete enum, struct or union type *definition* and the `packed'
attribute only past the closing brace of a definition.

`aligned (ALIGNMENT)'
     This attribute specifies a minimum alignment (in bytes) for
     variables of the specified type.  For example, the declarations:

          struct S { short f[3]; } __attribute__ ((aligned (8));
          typedef int more_aligned_int __attribute__ ((aligned (8));

     force the compiler to insure (as fas as it can) that each variable
     whose type is `struct S' or `more_aligned_int' will be allocated
     and aligned *at least* on a 8-byte boundary.  On a Sparc, having
     all variables of type `struct S' aligned to 8-byte boundaries
     allows the compiler to use the `ldd' and `std' (doubleword load and
     store) instructions when copying one variable of type `struct S' to
     another, thus improving run-time efficiency.

     Note that the alignment of any given `struct' or `union' type is
     required by the ANSI C standard to be at least a perfect multiple
     of the lowest common multiple of the alignments of all of the
     members of the `struct' or `union' in question.  This means that
     you *can* effectively adjust the alignment of a `struct' or `union'
     type by attaching an `aligned' attribute to any one of the members
     of such a type, but the notation illustrated in the example above
     is a more obvious, intuitive, and readable way to request the
     compiler to adjust the alignment of an entire `struct' or `union'
     type.

     As in the preceding example, you can explicitly specify the
     alignment (in bytes) that you wish the compiler to use for a given
     `struct' or `union' type.  Alternatively, you can leave out the
     alignment factor and just ask the compiler to align a type to the
     maximum useful alignment for the target machine you are compiling
     for.  For example, you could write:

          struct S { short f[3]; } __attribute__ ((aligned));

     Whenever you leave out the alignment factor in an `aligned'
     attribute specification, the compiler automatically sets the
     alignment for the type to the largest alignment which is ever used
     for any data type on the target machine you are compiling for.
     Doing this can often make copy operations more efficient, because
     the compiler can use whatever instructions copy the biggest chunks
     of memory when performing copies to or from the variables which
     have types that you have aligned this way.

     In the example above, if the size of each `short' is 2 bytes, then
     the size of the entire `struct S' type is 6 bytes.  The smallest
     power of two which is greater than or equal to that is 8, so the
     compiler sets the alignment for the entire `struct S' type to 8
     bytes.

     Note that although you can ask the compiler to select a
     time-efficient alignment for a given type and then declare only
     individual stand-alone objects of that type, the compiler's
     ability to select a time-efficient alignment is primarily useful
     only when you plan to create arrays of variables having the
     relevant (efficiently aligned) type.  If you declare or use arrays
     of variables of an efficiently-aligned type, then it is likely
     that your program will also be doing pointer arithmetic (or
     subscripting, which amounts to the same thing) on pointers to the
     relevant type, and the code that the compiler generates for these
     pointer arithmetic operations will often be more efficient for
     efficiently-aligned types than for other types.

     The `aligned' attribute can only increase the alignment; but you
     can decrease it by specifying `packed' as well.  See below.

     Note that the effectiveness of `aligned' attributes may be limited
     by inherent limitations in your linker.  On many systems, the
     linker is only able to arrange for variables to be aligned up to a
     certain maximum alignment.  (For some linkers, the maximum
     supported alignment may be very very small.)  If your linker is
     only able to align variables up to a maximum of 8 byte alignment,
     then specifying `aligned(16)' in an `__attribute__' will still
     only provide you with 8 byte alignment.  See your linker
     documentation for further information.

`packed'
     This attribute, attached to an `enum', `struct', or `union' type
     definition, specified that the minimum required memory be used to
     represent the type.

     Specifying this attribute for `struct' and `union' types is
     equivalent to specifying the `packed' attribute on each of the
     structure or union members.  Specifying the `-fshort-enums' flag
     on the line is equivalent to specifying the `packed' attribute on
     all `enum' definitions.

     You may only specify this attribute after a closing curly brace on
     an `enum' definition, not in a `typedef' declaration.

`transparent_union'
     This attribute, attached to a `union' type definition, indicates
     that any variable having that union type should, if passed to a
     function, be passed in the same way that the first union member
     would be passed.  For example:

          union foo
          {
            char a;
            int x[2];
          } __attribute__ ((transparent_union));

   To specify multiple attributes, separate them by commas within the
double parentheses: for example, `__attribute__ ((aligned (16),
packed))'.


File: gcc.info,  Node: Inline,  Next: Extended Asm,  Prev: Alignment,  Up: C Extensions

An Inline Function is As Fast As a Macro
========================================

   By declaring a function `inline', you can direct GNU CC to integrate
that function's code into the code for its callers.  This makes
execution faster by eliminating the function-call overhead; in
addition, if any of the actual argument values are constant, their known
values may permit simplifications at compile time so that not all of the
inline function's code needs to be included.  The effect on code size is
less predictable; object code may be larger or smaller with function
inlining, depending on the particular case.  Inlining of functions is an
optimization and it really "works" only in optimizing compilation.  If
you don't use `-O', no function is really inline.

   To declare a function inline, use the `inline' keyword in its
declaration, like this:

     inline int
     inc (int *a)
     {
       (*a)++;
     }

   (If you are writing a header file to be included in ANSI C programs,
write `__inline__' instead of `inline'.  *Note Alternate Keywords::.)

   You can also make all "simple enough" functions inline with the
option `-finline-functions'.  Note that certain usages in a function
definition can make it unsuitable for inline substitution.

   Note that in C and Objective C, unlike C++, the `inline' keyword
does not affect the linkage of the function.

   GNU CC automatically inlines member functions defined within the
class body of C++ programs even if they are not explicitly declared
`inline'.  (You can override this with `-fno-default-inline'; *note
Options Controlling C++ Dialect: C++ Dialect Options..)

   When a function is both inline and `static', if all calls to the
function are integrated into the caller, and the function's address is
never used, then the function's own assembler code is never referenced.
In this case, GNU CC does not actually output assembler code for the
function, unless you specify the option `-fkeep-inline-functions'.
Some calls cannot be integrated for various reasons (in particular,
calls that precede the function's definition cannot be integrated, and
neither can recursive calls within the definition).  If there is a
nonintegrated call, then the function is compiled to assembler code as
usual.  The function must also be compiled as usual if the program
refers to its address, because that can't be inlined.

   When an inline function is not `static', then the compiler must
assume that there may be calls from other source files; since a global
symbol can be defined only once in any program, the function must not
be defined in the other source files, so the calls therein cannot be
integrated.  Therefore, a non-`static' inline function is always
compiled on its own in the usual fashion.

   If you specify both `inline' and `extern' in the function
definition, then the definition is used only for inlining.  In no case
is the function compiled on its own, not even if you refer to its
address explicitly.  Such an address becomes an external reference, as
if you had only declared the function, and had not defined it.

   This combination of `inline' and `extern' has almost the effect of a
macro.  The way to use it is to put a function definition in a header
file with these keywords, and put another copy of the definition
(lacking `inline' and `extern') in a library file.  The definition in
the header file will cause most calls to the function to be inlined.
If any uses of the function remain, they will refer to the single copy
in the library.

   GNU C does not inline any functions when not optimizing.  It is not
clear whether it is better to inline or not, in this case, but we found
that a correct implementation when not optimizing was difficult.  So we
did the easy thing, and turned it off.


File: gcc.info,  Node: Extended Asm,  Next: Asm Labels,  Prev: Inline,  Up: C Extensions

Assembler Instructions with C Expression Operands
=================================================

   In an assembler instruction using `asm', you can now specify the
operands of the instruction using C expressions.  This means no more
guessing which registers or memory locations will contain the data you
want to use.

   You must specify an assembler instruction template much like what
appears in a machine description, plus an operand constraint string for
each operand.

   For example, here is how to use the 68881's `fsinx' instruction:

     asm ("fsinx %1,%0" : "=f" (result) : "f" (angle));

Here `angle' is the C expression for the input operand while `result'
is that of the output operand.  Each has `"f"' as its operand
constraint, saying that a floating point register is required.  The `='
in `=f' indicates that the operand is an output; all output operands'
constraints must use `='.  The constraints use the same language used
in the machine description (*note Constraints::.).

   Each operand is described by an operand-constraint string followed
by the C expression in parentheses.  A colon separates the assembler
template from the first output operand, and another separates the last
output operand from the first input, if any.  Commas separate output
operands and separate inputs.  The total number of operands is limited
to ten or to the maximum number of operands in any instruction pattern
in the machine description, whichever is greater.

   If there are no output operands, and there are input operands, then
there must be two consecutive colons surrounding the place where the
output operands would go.

   Output operand expressions must be lvalues; the compiler can check
this.  The input operands need not be lvalues.  The compiler cannot
check whether the operands have data types that are reasonable for the
instruction being executed.  It does not parse the assembler
instruction template and does not know what it means, or whether it is
valid assembler input.  The extended `asm' feature is most often used
for machine instructions that the compiler itself does not know exist.
If the output expression cannot be directly addressed (for example, it
is a bit field), your constraint must allow a register.  In that case,
GNU CC will use the register as the output of the `asm', and then store
that register into the output.

   The output operands must be write-only; GNU CC will assume that the
values in these operands before the instruction are dead and need not be
generated.  Extended asm does not support input-output or read-write
operands.  For this reason, the constraint character `+', which
indicates such an operand, may not be used.

   When the assembler instruction has a read-write operand, or an
operand in which only some of the bits are to be changed, you must
logically split its function into two separate operands, one input
operand and one write-only output operand.  The connection between them
is expressed by constraints which say they need to be in the same
location when the instruction executes.  You can use the same C
expression for both operands, or different expressions.  For example,
here we write the (fictitious) `combine' instruction with `bar' as its
read-only source operand and `foo' as its read-write destination:

     asm ("combine %2,%0" : "=r" (foo) : "0" (foo), "g" (bar));

The constraint `"0"' for operand 1 says that it must occupy the same
location as operand 0.  A digit in constraint is allowed only in an
input operand, and it must refer to an output operand.

   Only a digit in the constraint can guarantee that one operand will
be in the same place as another.  The mere fact that `foo' is the value
of both operands is not enough to guarantee that they will be in the
same place in the generated assembler code.  The following would not
work:

     asm ("combine %2,%0" : "=r" (foo) : "r" (foo), "g" (bar));

   Various optimizations or reloading could cause operands 0 and 1 to
be in different registers; GNU CC knows no reason not to do so.  For
example, the compiler might find a copy of the value of `foo' in one
register and use it for operand 1, but generate the output operand 0 in
a different register (copying it afterward to `foo''s own address).  Of
course, since the register for operand 1 is not even mentioned in the
assembler code, the result will not work, but GNU CC can't tell that.

   Some instructions clobber specific hard registers.  To describe
this, write a third colon after the input operands, followed by the
names of the clobbered hard registers (given as strings).  Here is a
realistic example for the Vax:

     asm volatile ("movc3 %0,%1,%2"
                   : /* no outputs */
                   : "g" (from), "g" (to), "g" (count)
                   : "r0", "r1", "r2", "r3", "r4", "r5");

   If you refer to a particular hardware register from the assembler
code, then you will probably have to list the register after the third
colon to tell the compiler that the register's value is modified.  In
many assemblers, the register names begin with `%'; to produce one `%'
in the assembler code, you must write `%%' in the input.

   If your assembler instruction can alter the condition code register,
add `cc' to the list of clobbered registers.  GNU CC on some machines
represents the condition codes as a specific hardware register; `cc'
serves to name this register.  On other machines, the condition code is
handled differently, and specifying `cc' has no effect.  But it is
valid no matter what the machine.

   If your assembler instruction modifies memory in an unpredictable
fashion, add `memory' to the list of clobbered registers.  This will
cause GNU CC to not keep memory values cached in registers across the
assembler instruction.

   You can put multiple assembler instructions together in a single
`asm' template, separated either with newlines (written as `\n') or with
semicolons if the assembler allows such semicolons.  The GNU assembler
allows semicolons and all Unix assemblers seem to do so.  The input
operands are guaranteed not to use any of the clobbered registers, and
neither will the output operands' addresses, so you can read and write
the clobbered registers as many times as you like.  Here is an example
of multiple instructions in a template; it assumes that the subroutine
`_foo' accepts arguments in registers 9 and 10:

     asm ("movl %0,r9;movl %1,r10;call _foo"
          : /* no outputs */
          : "g" (from), "g" (to)
          : "r9", "r10");

   Unless an output operand has the `&' constraint modifier, GNU CC may
allocate it in the same register as an unrelated input operand, on the
assumption that the inputs are consumed before the outputs are produced.
This assumption may be false if the assembler code actually consists of
more than one instruction.  In such a case, use `&' for each output
operand that may not overlap an input.  *Note Modifiers::.

   If you want to test the condition code produced by an assembler
instruction, you must include a branch and a label in the `asm'
construct, as follows:

     asm ("clr %0;frob %1;beq 0f;mov #1,%0;0:"
          : "g" (result)
          : "g" (input));

This assumes your assembler supports local labels, as the GNU assembler
and most Unix assemblers do.

   Speaking of labels, jumps from one `asm' to another are not
supported.  The compiler's optimizers do not know about these jumps,
and therefore they cannot take account of them when deciding how to
optimize.

   Usually the most convenient way to use these `asm' instructions is to
encapsulate them in macros that look like functions.  For example,

     #define sin(x)       \
     ({ double __value, __arg = (x);   \
        asm ("fsinx %1,%0": "=f" (__value): "f" (__arg));  \
        __value; })

Here the variable `__arg' is used to make sure that the instruction
operates on a proper `double' value, and to accept only those arguments
`x' which can convert automatically to a `double'.

   Another way to make sure the instruction operates on the correct
data type is to use a cast in the `asm'.  This is different from using a
variable `__arg' in that it converts more different types.  For
example, if the desired type were `int', casting the argument to `int'
would accept a pointer with no complaint, while assigning the argument
to an `int' variable named `__arg' would warn about using a pointer
unless the caller explicitly casts it.

   If an `asm' has output operands, GNU CC assumes for optimization
purposes that the instruction has no side effects except to change the
output operands.  This does not mean that instructions with a side
effect cannot be used, but you must be careful, because the compiler
may eliminate them if the output operands aren't used, or move them out
of loops, or replace two with one if they constitute a common
subexpression.  Also, if your instruction does have a side effect on a
variable that otherwise appears not to change, the old value of the
variable may be reused later if it happens to be found in a register.

   You can prevent an `asm' instruction from being deleted, moved
significantly, or combined, by writing the keyword `volatile' after the
`asm'.  For example:

     #define set_priority(x)  \
     asm volatile ("set_priority %0": /* no outputs */ : "g" (x))

An instruction without output operands will not be deleted or moved
significantly, regardless, unless it is unreachable.

   Note that even a volatile `asm' instruction can be moved in ways
that appear insignificant to the compiler, such as across jump
instructions.  You can't expect a sequence of volatile `asm'
instructions to remain perfectly consecutive.  If you want consecutive
output, use a single `asm'.

   It is a natural idea to look for a way to give access to the
condition code left by the assembler instruction.  However, when we
attempted to implement this, we found no way to make it work reliably.
The problem is that output operands might need reloading, which would
result in additional following "store" instructions.  On most machines,
these instructions would alter the condition code before there was time
to test it.  This problem doesn't arise for ordinary "test" and
"compare" instructions because they don't have any output operands.

   If you are writing a header file that should be includable in ANSI C
programs, write `__asm__' instead of `asm'.  *Note Alternate Keywords::.