[15273] | 1 | Basic Installation |
---|
| 2 | ================== |
---|
| 3 | |
---|
| 4 | These are generic installation instructions. |
---|
| 5 | |
---|
| 6 | The `configure' shell script attempts to guess correct values for |
---|
| 7 | various system-dependent variables used during compilation. It uses |
---|
| 8 | those values to create a `Makefile' in each directory of the package. |
---|
| 9 | It may also create one or more `.h' files containing system-dependent |
---|
| 10 | definitions. Finally, it creates a shell script `config.status' that |
---|
| 11 | you can run in the future to recreate the current configuration, a file |
---|
| 12 | `config.cache' that saves the results of its tests to speed up |
---|
| 13 | reconfiguring, and a file `config.log' containing compiler output |
---|
| 14 | (useful mainly for debugging `configure'). |
---|
| 15 | |
---|
| 16 | If you need to do unusual things to compile the package, please try |
---|
| 17 | to figure out how `configure' could check whether to do them, and mail |
---|
| 18 | diffs or instructions to the address given in the `README' so they can |
---|
| 19 | be considered for the next release. If at some point `config.cache' |
---|
| 20 | contains results you don't want to keep, you may remove or edit it. |
---|
| 21 | |
---|
| 22 | The file `configure.in' is used to create `configure' by a program |
---|
| 23 | called `autoconf'. You only need `configure.in' if you want to change |
---|
| 24 | it or regenerate `configure' using a newer version of `autoconf'. |
---|
| 25 | |
---|
| 26 | The simplest way to compile this package is: |
---|
| 27 | |
---|
| 28 | 1. `cd' to the directory containing the package's source code and type |
---|
| 29 | `./configure' to configure the package for your system. If you're |
---|
| 30 | using `csh' on an old version of System V, you might need to type |
---|
| 31 | `sh ./configure' instead to prevent `csh' from trying to execute |
---|
| 32 | `configure' itself. |
---|
| 33 | |
---|
| 34 | Running `configure' takes awhile. While running, it prints some |
---|
| 35 | messages telling which features it is checking for. |
---|
| 36 | |
---|
| 37 | 2. Type `make' to compile the package. |
---|
| 38 | |
---|
| 39 | 3. Optionally, type `make check' to run any self-tests that come with |
---|
| 40 | the package. |
---|
| 41 | |
---|
| 42 | 4. Type `make install' to install the programs and any data files and |
---|
| 43 | documentation. |
---|
| 44 | |
---|
| 45 | 5. You can remove the program binaries and object files from the |
---|
| 46 | source code directory by typing `make clean'. To also remove the |
---|
| 47 | files that `configure' created (so you can compile the package for |
---|
| 48 | a different kind of computer), type `make distclean'. There is |
---|
| 49 | also a `make maintainer-clean' target, but that is intended mainly |
---|
| 50 | for the package's developers. If you use it, you may have to get |
---|
| 51 | all sorts of other programs in order to regenerate files that came |
---|
| 52 | with the distribution. |
---|
| 53 | |
---|
| 54 | Compilers and Options |
---|
| 55 | ===================== |
---|
| 56 | |
---|
| 57 | Some systems require unusual options for compilation or linking that |
---|
| 58 | the `configure' script does not know about. You can give `configure' |
---|
| 59 | initial values for variables by setting them in the environment. Using |
---|
| 60 | a Bourne-compatible shell, you can do that on the command line like |
---|
| 61 | this: |
---|
| 62 | CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure |
---|
| 63 | |
---|
| 64 | Or on systems that have the `env' program, you can do it like this: |
---|
| 65 | env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure |
---|
| 66 | |
---|
| 67 | Compiling For Multiple Architectures |
---|
| 68 | ==================================== |
---|
| 69 | |
---|
| 70 | You can compile the package for more than one kind of computer at the |
---|
| 71 | same time, by placing the object files for each architecture in their |
---|
| 72 | own directory. To do this, you must use a version of `make' that |
---|
| 73 | supports the `VPATH' variable, such as GNU `make'. `cd' to the |
---|
| 74 | directory where you want the object files and executables to go and run |
---|
| 75 | the `configure' script. `configure' automatically checks for the |
---|
| 76 | source code in the directory that `configure' is in and in `..'. |
---|
| 77 | |
---|
| 78 | If you have to use a `make' that does not supports the `VPATH' |
---|
| 79 | variable, you have to compile the package for one architecture at a time |
---|
| 80 | in the source code directory. After you have installed the package for |
---|
| 81 | one architecture, use `make distclean' before reconfiguring for another |
---|
| 82 | architecture. |
---|
| 83 | |
---|
| 84 | Installation Names |
---|
| 85 | ================== |
---|
| 86 | |
---|
| 87 | By default, `make install' will install the package's files in |
---|
| 88 | `/usr/local/bin', `/usr/local/man', etc. You can specify an |
---|
| 89 | installation prefix other than `/usr/local' by giving `configure' the |
---|
| 90 | option `--prefix=PATH'. |
---|
| 91 | |
---|
| 92 | You can specify separate installation prefixes for |
---|
| 93 | architecture-specific files and architecture-independent files. If you |
---|
| 94 | give `configure' the option `--exec-prefix=PATH', the package will use |
---|
| 95 | PATH as the prefix for installing programs and libraries. |
---|
| 96 | Documentation and other data files will still use the regular prefix. |
---|
| 97 | |
---|
| 98 | In addition, if you use an unusual directory layout you can give |
---|
| 99 | options like `--bindir=PATH' to specify different values for particular |
---|
| 100 | kinds of files. Run `configure --help' for a list of the directories |
---|
| 101 | you can set and what kinds of files go in them. |
---|
| 102 | |
---|
| 103 | If the package supports it, you can cause programs to be installed |
---|
| 104 | with an extra prefix or suffix on their names by giving `configure' the |
---|
| 105 | option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. |
---|
| 106 | |
---|
| 107 | Optional Features |
---|
| 108 | ================= |
---|
| 109 | |
---|
| 110 | Some packages pay attention to `--enable-FEATURE' options to |
---|
| 111 | `configure', where FEATURE indicates an optional part of the package. |
---|
| 112 | They may also pay attention to `--with-PACKAGE' options, where PACKAGE |
---|
| 113 | is something like `gnu-as' or `x' (for the X Window System). The |
---|
| 114 | `README' should mention any `--enable-' and `--with-' options that the |
---|
| 115 | package recognizes. |
---|
| 116 | |
---|
| 117 | For packages that use the X Window System, `configure' can usually |
---|
| 118 | find the X include and library files automatically, but if it doesn't, |
---|
| 119 | you can use the `configure' options `--x-includes=DIR' and |
---|
| 120 | `--x-libraries=DIR' to specify their locations. |
---|
| 121 | |
---|
[16930] | 122 | For packages that use the GNU libiconv library, you can use the |
---|
| 123 | `configure' option `--with-libiconv-prefix' to specify the prefix you |
---|
| 124 | used while installing libiconv. |
---|
| 125 | |
---|
| 126 | Particular Systems |
---|
| 127 | ================== |
---|
| 128 | |
---|
| 129 | On most systems, the compiler doesn't search include files in |
---|
| 130 | /usr/local/include, and the linker doesn't search libraries in |
---|
| 131 | /usr/local/lib. (A notable exception is GNU/Linux.) Therefore some |
---|
| 132 | packages won't find other packages installed earlier. To overcome this |
---|
| 133 | problem, it is recommended to use the following options: |
---|
| 134 | |
---|
| 135 | env CPPFLAGS=-I/usr/local/include LDFLAGS=-L/usr/local/lib ./configure |
---|
| 136 | |
---|
| 137 | On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC |
---|
| 138 | is not installed, it is recommended to use the following options in order |
---|
| 139 | to use an ANSI C compiler: |
---|
| 140 | |
---|
| 141 | env CC="cc -Ae" ./configure |
---|
| 142 | |
---|
| 143 | On AIX 3, the C include files by default don't define some necessary |
---|
| 144 | prototype declarations. If GNU CC is not installed, it is recommended to |
---|
| 145 | use the following options: |
---|
| 146 | |
---|
| 147 | env CC="xlc -D_ALL_SOURCE" ./configure |
---|
| 148 | |
---|
| 149 | On BeOS, user installed software goes in /boot/home/config, not |
---|
| 150 | /usr/local. It is recommended to use the following options: |
---|
| 151 | |
---|
| 152 | CPPFLAGS=-I/boot/home/config/include LDFLAGS=-L/boot/home/config/lib \ |
---|
| 153 | ./configure --prefix=/boot/home/config |
---|
| 154 | |
---|
[15273] | 155 | Specifying the System Type |
---|
| 156 | ========================== |
---|
| 157 | |
---|
| 158 | There may be some features `configure' can not figure out |
---|
| 159 | automatically, but needs to determine by the type of host the package |
---|
| 160 | will run on. Usually `configure' can figure that out, but if it prints |
---|
| 161 | a message saying it can not guess the host type, give it the |
---|
| 162 | `--host=TYPE' option. TYPE can either be a short name for the system |
---|
| 163 | type, such as `sun4', or a canonical name with three fields: |
---|
| 164 | CPU-COMPANY-SYSTEM |
---|
| 165 | |
---|
| 166 | See the file `config.sub' for the possible values of each field. If |
---|
| 167 | `config.sub' isn't included in this package, then this package doesn't |
---|
| 168 | need to know the host type. |
---|
| 169 | |
---|
| 170 | If you are building compiler tools for cross-compiling, you can also |
---|
| 171 | use the `--target=TYPE' option to select the type of system they will |
---|
| 172 | produce code for and the `--build=TYPE' option to select the type of |
---|
| 173 | system on which you are compiling the package. |
---|
| 174 | |
---|
| 175 | Sharing Defaults |
---|
| 176 | ================ |
---|
| 177 | |
---|
| 178 | If you want to set default values for `configure' scripts to share, |
---|
| 179 | you can create a site shell script called `config.site' that gives |
---|
| 180 | default values for variables like `CC', `cache_file', and `prefix'. |
---|
| 181 | `configure' looks for `PREFIX/share/config.site' if it exists, then |
---|
| 182 | `PREFIX/etc/config.site' if it exists. Or, you can set the |
---|
| 183 | `CONFIG_SITE' environment variable to the location of the site script. |
---|
| 184 | A warning: not all `configure' scripts look for a site script. |
---|
| 185 | |
---|
| 186 | Operation Controls |
---|
| 187 | ================== |
---|
| 188 | |
---|
| 189 | `configure' recognizes the following options to control how it |
---|
| 190 | operates. |
---|
| 191 | |
---|
| 192 | `--cache-file=FILE' |
---|
| 193 | Use and save the results of the tests in FILE instead of |
---|
| 194 | `./config.cache'. Set FILE to `/dev/null' to disable caching, for |
---|
| 195 | debugging `configure'. |
---|
| 196 | |
---|
| 197 | `--help' |
---|
| 198 | Print a summary of the options to `configure', and exit. |
---|
| 199 | |
---|
| 200 | `--quiet' |
---|
| 201 | `--silent' |
---|
| 202 | `-q' |
---|
| 203 | Do not print messages saying which checks are being made. To |
---|
| 204 | suppress all normal output, redirect it to `/dev/null' (any error |
---|
| 205 | messages will still be shown). |
---|
| 206 | |
---|
| 207 | `--srcdir=DIR' |
---|
| 208 | Look for the package's source code in directory DIR. Usually |
---|
| 209 | `configure' can determine that directory automatically. |
---|
| 210 | |
---|
| 211 | `--version' |
---|
| 212 | Print the version of Autoconf used to generate the `configure' |
---|
| 213 | script, and exit. |
---|
| 214 | |
---|
| 215 | `configure' also accepts some other, not widely useful, options. |
---|
[16930] | 216 | |
---|