source: trunk/third/ggv/Makefile.in @ 18703

Revision 18703, 15.1 KB checked in by ghudson, 22 years ago (diff)
This commit was generated by cvs2svn to compensate for changes in r18702, which included commits to RCS files with non-trunk default branches.
Line 
1# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
2
3# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
4# This Makefile.in is free software; the Free Software Foundation
5# gives unlimited permission to copy and/or distribute it,
6# with or without modifications, as long as this notice is preserved.
7
8# This program is distributed in the hope that it will be useful,
9# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
10# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
11# PARTICULAR PURPOSE.
12
13
14SHELL = @SHELL@
15
16srcdir = @srcdir@
17top_srcdir = @top_srcdir@
18VPATH = @srcdir@
19prefix = @prefix@
20exec_prefix = @exec_prefix@
21
22bindir = @bindir@
23sbindir = @sbindir@
24libexecdir = @libexecdir@
25datadir = @datadir@
26sysconfdir = @sysconfdir@
27sharedstatedir = @sharedstatedir@
28localstatedir = @localstatedir@
29libdir = @libdir@
30infodir = @infodir@
31mandir = @mandir@
32includedir = @includedir@
33oldincludedir = /usr/include
34
35DESTDIR =
36
37pkgdatadir = $(datadir)/@PACKAGE@
38pkglibdir = $(libdir)/@PACKAGE@
39pkgincludedir = $(includedir)/@PACKAGE@
40
41top_builddir = .
42
43ACLOCAL = @ACLOCAL@
44AUTOCONF = @AUTOCONF@
45AUTOMAKE = @AUTOMAKE@
46AUTOHEADER = @AUTOHEADER@
47
48INSTALL = @INSTALL@
49INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
50INSTALL_DATA = @INSTALL_DATA@
51INSTALL_SCRIPT = @INSTALL_SCRIPT@
52transform = @program_transform_name@
53
54NORMAL_INSTALL = :
55PRE_INSTALL = :
56POST_INSTALL = :
57NORMAL_UNINSTALL = :
58PRE_UNINSTALL = :
59POST_UNINSTALL = :
60host_alias = @host_alias@
61host_triplet = @host@
62AS = @AS@
63BONOBO_ACT_IDLDIR = @BONOBO_ACT_IDLDIR@
64BONOBO_IDLDIR = @BONOBO_IDLDIR@
65CATALOGS = @CATALOGS@
66CATOBJEXT = @CATOBJEXT@
67CC = @CC@
68CFLAGS = @CFLAGS@
69CPPFLAGS = @CPPFLAGS@
70DATADIRNAME = @DATADIRNAME@
71DLLTOOL = @DLLTOOL@
72ECHO = @ECHO@
73EXEEXT = @EXEEXT@
74GCONFTOOL = @GCONFTOOL@
75GCONF_CONFIG_SOURCE = @GCONF_CONFIG_SOURCE@
76GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
77GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
78GENCAT = @GENCAT@
79GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
80GGV_CFLAGS = @GGV_CFLAGS@
81GGV_EXTRA_CFLAGS = @GGV_EXTRA_CFLAGS@
82GGV_LIBS = @GGV_LIBS@
83GMOFILES = @GMOFILES@
84GMSGFMT = @GMSGFMT@
85GNOME_INTERFACE_VERSION = @GNOME_INTERFACE_VERSION@
86GS_PROG = @GS_PROG@
87GT_NO = @GT_NO@
88GT_YES = @GT_YES@
89INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
90INSTALL_GCONF_CONFIG_SOURCE = @INSTALL_GCONF_CONFIG_SOURCE@
91INSTOBJEXT = @INSTOBJEXT@
92INTLDEPS = @INTLDEPS@
93INTLLIBS = @INTLLIBS@
94INTLOBJS = @INTLOBJS@
95INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
96INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
97INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
98INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
99INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
100INTLTOOL_MERGE = @INTLTOOL_MERGE@
101INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
102INTLTOOL_PERL = @INTLTOOL_PERL@
103INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
104INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
105INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
106INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
107INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
108INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
109INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
110INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
111LDFLAGS = @LDFLAGS@
112LIBTOOL = @LIBTOOL@
113LN_S = @LN_S@
114LPR_PROG = @LPR_PROG@
115MAINT = @MAINT@
116MAKEINFO = @MAKEINFO@
117MKINSTALLDIRS = @MKINSTALLDIRS@
118MSGFMT = @MSGFMT@
119OBJDUMP = @OBJDUMP@
120OBJEXT = @OBJEXT@
121ORBIT_IDL = @ORBIT_IDL@
122PACKAGE = @PACKAGE@
123PKG_CONFIG = @PKG_CONFIG@
124POFILES = @POFILES@
125POPT_LIBS = @POPT_LIBS@
126POSUB = @POSUB@
127RANLIB = @RANLIB@
128STRIP = @STRIP@
129USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
130USE_NLS = @USE_NLS@
131VERSION = @VERSION@
132l = @l@
133
134SUBDIRS = po idl src bonobo pixmaps help omf-install
135
136DESKTOP_IN_FILES = ggv.desktop.in
137DESKTOP_FILES = $(DESKTOP_IN_FILES:.desktop.in=.desktop)
138
139schemasdir = $(sysconfdir)/gconf/schemas
140schemas_DATA = ggv.schemas
141
142EXTRA_DIST =    $(DESKTOP_FILES)                $(DESKTOP_IN_FILES)             ggv.spec.in                     ggv.spec                        ggv.schemas                     xmldocs.make                    intltool-extract.in             intltool-update.in              intltool-merge.in               COPYING-DOCS                    TODO                            MAINTAINERS
143
144
145Graphicsdir = $(datadir)/applications
146Graphics_DATA = $(DESKTOP_FILES)
147ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
148mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
149CONFIG_HEADER = config.h
150CONFIG_CLEAN_FILES =  ggv.spec
151DATA =  $(Graphics_DATA) $(schemas_DATA)
152
153DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
154Makefile.am Makefile.in NEWS TODO acinclude.m4 aclocal.m4 config.guess \
155config.h.in config.sub configure configure.in ggv.spec.in install-sh \
156ltconfig ltmain.sh missing mkinstalldirs
157
158
159DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
160
161TAR = tar
162GZIP_ENV = --best
163all: all-redirect
164.SUFFIXES:
165$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
166        cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
167
168Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
169        cd $(top_builddir) \
170          && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
171
172$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  acinclude.m4
173        cd $(srcdir) && $(ACLOCAL)
174
175config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
176        $(SHELL) ./config.status --recheck
177$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
178        cd $(srcdir) && $(AUTOCONF)
179
180config.h: stamp-h
181        @if test ! -f $@; then \
182                rm -f stamp-h; \
183                $(MAKE) stamp-h; \
184        else :; fi
185stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
186        cd $(top_builddir) \
187          && CONFIG_FILES= CONFIG_HEADERS=config.h \
188             $(SHELL) ./config.status
189        @echo timestamp > stamp-h 2> /dev/null
190$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
191        @if test ! -f $@; then \
192                rm -f $(srcdir)/stamp-h.in; \
193                $(MAKE) $(srcdir)/stamp-h.in; \
194        else :; fi
195$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
196        cd $(top_srcdir) && $(AUTOHEADER)
197        @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
198
199mostlyclean-hdr:
200
201clean-hdr:
202
203distclean-hdr:
204        -rm -f config.h
205
206maintainer-clean-hdr:
207ggv.spec: $(top_builddir)/config.status ggv.spec.in
208        cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
209
210install-GraphicsDATA: $(Graphics_DATA)
211        @$(NORMAL_INSTALL)
212        $(mkinstalldirs) $(DESTDIR)$(Graphicsdir)
213        @list='$(Graphics_DATA)'; for p in $$list; do \
214          if test -f $(srcdir)/$$p; then \
215            echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(Graphicsdir)/$$p"; \
216            $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(Graphicsdir)/$$p; \
217          else if test -f $$p; then \
218            echo " $(INSTALL_DATA) $$p $(DESTDIR)$(Graphicsdir)/$$p"; \
219            $(INSTALL_DATA) $$p $(DESTDIR)$(Graphicsdir)/$$p; \
220          fi; fi; \
221        done
222
223uninstall-GraphicsDATA:
224        @$(NORMAL_UNINSTALL)
225        list='$(Graphics_DATA)'; for p in $$list; do \
226          rm -f $(DESTDIR)$(Graphicsdir)/$$p; \
227        done
228
229install-schemasDATA: $(schemas_DATA)
230        @$(NORMAL_INSTALL)
231        $(mkinstalldirs) $(DESTDIR)$(schemasdir)
232        @list='$(schemas_DATA)'; for p in $$list; do \
233          if test -f $(srcdir)/$$p; then \
234            echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(schemasdir)/$$p"; \
235            $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(schemasdir)/$$p; \
236          else if test -f $$p; then \
237            echo " $(INSTALL_DATA) $$p $(DESTDIR)$(schemasdir)/$$p"; \
238            $(INSTALL_DATA) $$p $(DESTDIR)$(schemasdir)/$$p; \
239          fi; fi; \
240        done
241
242uninstall-schemasDATA:
243        @$(NORMAL_UNINSTALL)
244        list='$(schemas_DATA)'; for p in $$list; do \
245          rm -f $(DESTDIR)$(schemasdir)/$$p; \
246        done
247
248# This directory's subdirectories are mostly independent; you can cd
249# into them and run `make' without going through this Makefile.
250# To change the values of `make' variables: instead of editing Makefiles,
251# (1) if the variable is set in `config.status', edit `config.status'
252#     (which will cause the Makefiles to be regenerated when you run `make');
253# (2) otherwise, pass the desired values on the `make' command line.
254
255@SET_MAKE@
256
257all-recursive install-data-recursive install-exec-recursive \
258installdirs-recursive install-recursive uninstall-recursive  \
259check-recursive installcheck-recursive info-recursive dvi-recursive:
260        @set fnord $(MAKEFLAGS); amf=$$2; \
261        dot_seen=no; \
262        target=`echo $@ | sed s/-recursive//`; \
263        list='$(SUBDIRS)'; for subdir in $$list; do \
264          echo "Making $$target in $$subdir"; \
265          if test "$$subdir" = "."; then \
266            dot_seen=yes; \
267            local_target="$$target-am"; \
268          else \
269            local_target="$$target"; \
270          fi; \
271          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
272           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
273        done; \
274        if test "$$dot_seen" = "no"; then \
275          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
276        fi; test -z "$$fail"
277
278mostlyclean-recursive clean-recursive distclean-recursive \
279maintainer-clean-recursive:
280        @set fnord $(MAKEFLAGS); amf=$$2; \
281        dot_seen=no; \
282        rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
283          rev="$$subdir $$rev"; \
284          test "$$subdir" != "." || dot_seen=yes; \
285        done; \
286        test "$$dot_seen" = "no" && rev=". $$rev"; \
287        target=`echo $@ | sed s/-recursive//`; \
288        for subdir in $$rev; do \
289          echo "Making $$target in $$subdir"; \
290          if test "$$subdir" = "."; then \
291            local_target="$$target-am"; \
292          else \
293            local_target="$$target"; \
294          fi; \
295          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
296           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
297        done && test -z "$$fail"
298tags-recursive:
299        list='$(SUBDIRS)'; for subdir in $$list; do \
300          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
301        done
302
303tags: TAGS
304
305ID: $(HEADERS) $(SOURCES) $(LISP)
306        list='$(SOURCES) $(HEADERS)'; \
307        unique=`for i in $$list; do echo $$i; done | \
308          awk '    { files[$$0] = 1; } \
309               END { for (i in files) print i; }'`; \
310        here=`pwd` && cd $(srcdir) \
311          && mkid -f$$here/ID $$unique $(LISP)
312
313TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
314        tags=; \
315        here=`pwd`; \
316        list='$(SUBDIRS)'; for subdir in $$list; do \
317   if test "$$subdir" = .; then :; else \
318            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
319   fi; \
320        done; \
321        list='$(SOURCES) $(HEADERS)'; \
322        unique=`for i in $$list; do echo $$i; done | \
323          awk '    { files[$$0] = 1; } \
324               END { for (i in files) print i; }'`; \
325        test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
326          || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))
327
328mostlyclean-tags:
329
330clean-tags:
331
332distclean-tags:
333        -rm -f TAGS ID
334
335maintainer-clean-tags:
336
337distdir = $(PACKAGE)-$(VERSION)
338top_distdir = $(distdir)
339
340# This target untars the dist file and tries a VPATH configuration.  Then
341# it guarantees that the distribution is self-contained by making another
342# tarfile.
343distcheck: dist
344        -rm -rf $(distdir)
345        GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
346        mkdir $(distdir)/=build
347        mkdir $(distdir)/=inst
348        dc_install_base=`cd $(distdir)/=inst && pwd`; \
349        cd $(distdir)/=build \
350          && ../configure --srcdir=.. --prefix=$$dc_install_base \
351          && $(MAKE) $(AM_MAKEFLAGS) \
352          && $(MAKE) $(AM_MAKEFLAGS) dvi \
353          && $(MAKE) $(AM_MAKEFLAGS) check \
354          && $(MAKE) $(AM_MAKEFLAGS) install \
355          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
356          && $(MAKE) $(AM_MAKEFLAGS) dist
357        -rm -rf $(distdir)
358        @banner="$(distdir).tar.gz is ready for distribution"; \
359        dashes=`echo "$$banner" | sed s/./=/g`; \
360        echo "$$dashes"; \
361        echo "$$banner"; \
362        echo "$$dashes"
363dist: distdir
364        -chmod -R a+r $(distdir)
365        GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
366        -rm -rf $(distdir)
367dist-all: distdir
368        -chmod -R a+r $(distdir)
369        GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
370        -rm -rf $(distdir)
371distdir: $(DISTFILES)
372        -rm -rf $(distdir)
373        mkdir $(distdir)
374        -chmod 777 $(distdir)
375        @for file in $(DISTFILES); do \
376          d=$(srcdir); \
377          if test -d $$d/$$file; then \
378            cp -pr $$d/$$file $(distdir)/$$file; \
379          else \
380            test -f $(distdir)/$$file \
381            || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
382            || cp -p $$d/$$file $(distdir)/$$file || :; \
383          fi; \
384        done
385        for subdir in $(SUBDIRS); do \
386          if test "$$subdir" = .; then :; else \
387            test -d $(distdir)/$$subdir \
388            || mkdir $(distdir)/$$subdir \
389            || exit 1; \
390            chmod 777 $(distdir)/$$subdir; \
391            (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
392              || exit 1; \
393          fi; \
394        done
395info-am:
396info: info-recursive
397dvi-am:
398dvi: dvi-recursive
399check-am: all-am
400check: check-recursive
401installcheck-am:
402installcheck: installcheck-recursive
403all-recursive-am: config.h
404        $(MAKE) $(AM_MAKEFLAGS) all-recursive
405
406install-exec-am:
407install-exec: install-exec-recursive
408
409install-data-am: install-GraphicsDATA install-schemasDATA \
410                install-data-local
411install-data: install-data-recursive
412
413install-am: all-am
414        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
415install: install-recursive
416uninstall-am: uninstall-GraphicsDATA uninstall-schemasDATA
417uninstall: uninstall-recursive
418all-am: Makefile $(DATA) config.h
419all-redirect: all-recursive-am
420install-strip:
421        $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
422installdirs: installdirs-recursive
423installdirs-am:
424        $(mkinstalldirs)  $(DESTDIR)$(Graphicsdir) $(DESTDIR)$(schemasdir)
425
426
427mostlyclean-generic:
428
429clean-generic:
430
431distclean-generic:
432        -rm -f Makefile $(CONFIG_CLEAN_FILES)
433        -rm -f config.cache config.log stamp-h stamp-h[0-9]*
434
435maintainer-clean-generic:
436mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
437
438mostlyclean: mostlyclean-recursive
439
440clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
441
442clean: clean-recursive
443
444distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
445        -rm -f libtool
446
447distclean: distclean-recursive
448        -rm -f config.status
449
450maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
451                maintainer-clean-generic distclean-am
452        @echo "This command is intended for maintainers to use;"
453        @echo "it deletes files that may require special tools to rebuild."
454
455maintainer-clean: maintainer-clean-recursive
456        -rm -f config.status
457
458.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
459uninstall-GraphicsDATA install-GraphicsDATA uninstall-schemasDATA \
460install-schemasDATA install-data-recursive uninstall-data-recursive \
461install-exec-recursive uninstall-exec-recursive installdirs-recursive \
462uninstalldirs-recursive all-recursive check-recursive \
463installcheck-recursive info-recursive dvi-recursive \
464mostlyclean-recursive distclean-recursive clean-recursive \
465maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
466distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
467dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
468install-exec-am install-exec install-data-local install-data-am \
469install-data install-am install uninstall-am uninstall all-redirect \
470all-am all installdirs-am installdirs mostlyclean-generic \
471distclean-generic clean-generic maintainer-clean-generic clean \
472mostlyclean distclean maintainer-clean
473
474
475@INTLTOOL_DESKTOP_RULE@
476
477install-schemas:
478        GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --shutdown
479        GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(top_srcdir)/ggv.schemas
480
481@INSTALL_SCHEMAS_TRUE@install-data-local: install-schemas
482
483# Tell versions [3.59,3.63) of GNU make to not export all variables.
484# Otherwise a system limit (for SysV at least) may be exceeded.
485.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.