source: trunk/third/ggv/Makefile.in @ 18824

Revision 18824, 15.2 KB checked in by ghudson, 22 years ago (diff)
This commit was generated by cvs2svn to compensate for changes in r18823, which included commits to RCS files with non-trunk default branches.
Line 
1# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
2
3# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
4# This Makefile.in is free software; the Free Software Foundation
5# gives unlimited permission to copy and/or distribute it,
6# with or without modifications, as long as this notice is preserved.
7
8# This program is distributed in the hope that it will be useful,
9# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
10# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
11# PARTICULAR PURPOSE.
12
13
14SHELL = @SHELL@
15
16srcdir = @srcdir@
17top_srcdir = @top_srcdir@
18VPATH = @srcdir@
19prefix = @prefix@
20exec_prefix = @exec_prefix@
21
22bindir = @bindir@
23sbindir = @sbindir@
24libexecdir = @libexecdir@
25datadir = @datadir@
26sysconfdir = @sysconfdir@
27sharedstatedir = @sharedstatedir@
28localstatedir = @localstatedir@
29libdir = @libdir@
30infodir = @infodir@
31mandir = @mandir@
32includedir = @includedir@
33oldincludedir = /usr/include
34
35DESTDIR =
36
37pkgdatadir = $(datadir)/@PACKAGE@
38pkglibdir = $(libdir)/@PACKAGE@
39pkgincludedir = $(includedir)/@PACKAGE@
40
41top_builddir = .
42
43ACLOCAL = @ACLOCAL@
44AUTOCONF = @AUTOCONF@
45AUTOMAKE = @AUTOMAKE@
46AUTOHEADER = @AUTOHEADER@
47
48INSTALL = @INSTALL@
49INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
50INSTALL_DATA = @INSTALL_DATA@
51INSTALL_SCRIPT = @INSTALL_SCRIPT@
52transform = @program_transform_name@
53
54NORMAL_INSTALL = :
55PRE_INSTALL = :
56POST_INSTALL = :
57NORMAL_UNINSTALL = :
58PRE_UNINSTALL = :
59POST_UNINSTALL = :
60host_alias = @host_alias@
61host_triplet = @host@
62AS = @AS@
63BONOBO_ACT_IDLDIR = @BONOBO_ACT_IDLDIR@
64BONOBO_IDLDIR = @BONOBO_IDLDIR@
65CATALOGS = @CATALOGS@
66CATOBJEXT = @CATOBJEXT@
67CC = @CC@
68CFLAGS = @CFLAGS@
69CPPFLAGS = @CPPFLAGS@
70DATADIRNAME = @DATADIRNAME@
71DLLTOOL = @DLLTOOL@
72ECHO = @ECHO@
73EXEEXT = @EXEEXT@
74GCONFTOOL = @GCONFTOOL@
75GCONF_CONFIG_SOURCE = @GCONF_CONFIG_SOURCE@
76GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
77GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
78GENCAT = @GENCAT@
79GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
80GGV_CFLAGS = @GGV_CFLAGS@
81GGV_EXTRA_CFLAGS = @GGV_EXTRA_CFLAGS@
82GGV_LIBS = @GGV_LIBS@
83GMOFILES = @GMOFILES@
84GMSGFMT = @GMSGFMT@
85GNOME_INTERFACE_VERSION = @GNOME_INTERFACE_VERSION@
86GS_PROG = @GS_PROG@
87GT_NO = @GT_NO@
88GT_YES = @GT_YES@
89INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
90INSTALL_GCONF_CONFIG_SOURCE = @INSTALL_GCONF_CONFIG_SOURCE@
91INSTOBJEXT = @INSTOBJEXT@
92INTLDEPS = @INTLDEPS@
93INTLLIBS = @INTLLIBS@
94INTLOBJS = @INTLOBJS@
95INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
96INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
97INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
98INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
99INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
100INTLTOOL_MERGE = @INTLTOOL_MERGE@
101INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
102INTLTOOL_PERL = @INTLTOOL_PERL@
103INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
104INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@
105INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
106INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
107INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
108INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
109INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@
110INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
111INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
112INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
113LDFLAGS = @LDFLAGS@
114LIBTOOL = @LIBTOOL@
115LN_S = @LN_S@
116LPR_PROG = @LPR_PROG@
117MAINT = @MAINT@
118MAKEINFO = @MAKEINFO@
119MKINSTALLDIRS = @MKINSTALLDIRS@
120MSGFMT = @MSGFMT@
121OBJDUMP = @OBJDUMP@
122OBJEXT = @OBJEXT@
123ORBIT_IDL = @ORBIT_IDL@
124PACKAGE = @PACKAGE@
125PKG_CONFIG = @PKG_CONFIG@
126POFILES = @POFILES@
127POPT_LIBS = @POPT_LIBS@
128POSUB = @POSUB@
129PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
130PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
131RANLIB = @RANLIB@
132STRIP = @STRIP@
133USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
134USE_NLS = @USE_NLS@
135VERSION = @VERSION@
136l = @l@
137
138SUBDIRS = po idl src bonobo pixmaps help omf-install
139
140DESKTOP_IN_FILES = ggv.desktop.in
141DESKTOP_FILES = $(DESKTOP_IN_FILES:.desktop.in=.desktop)
142
143schemasdir = $(sysconfdir)/gconf/schemas
144schemas_DATA = ggv.schemas
145
146EXTRA_DIST =    $(DESKTOP_FILES)                $(DESKTOP_IN_FILES)             ggv.spec.in                     ggv.spec                        ggv.schemas                     xmldocs.make                    intltool-extract.in             intltool-update.in              intltool-merge.in               COPYING-DOCS                    TODO                            MAINTAINERS
147
148
149Graphicsdir = $(datadir)/applications
150Graphics_DATA = $(DESKTOP_FILES)
151ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
152mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
153CONFIG_HEADER = config.h
154CONFIG_CLEAN_FILES =  ggv.spec
155DATA =  $(Graphics_DATA) $(schemas_DATA)
156
157DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
158Makefile.am Makefile.in NEWS TODO acinclude.m4 aclocal.m4 config.guess \
159config.h.in config.sub configure configure.in ggv.spec.in install-sh \
160ltconfig ltmain.sh missing mkinstalldirs
161
162
163DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
164
165TAR = tar
166GZIP_ENV = --best
167all: all-redirect
168.SUFFIXES:
169$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
170        cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
171
172Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
173        cd $(top_builddir) \
174          && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
175
176$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  acinclude.m4
177        cd $(srcdir) && $(ACLOCAL)
178
179config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
180        $(SHELL) ./config.status --recheck
181$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
182        cd $(srcdir) && $(AUTOCONF)
183
184config.h: stamp-h
185        @if test ! -f $@; then \
186                rm -f stamp-h; \
187                $(MAKE) stamp-h; \
188        else :; fi
189stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
190        cd $(top_builddir) \
191          && CONFIG_FILES= CONFIG_HEADERS=config.h \
192             $(SHELL) ./config.status
193        @echo timestamp > stamp-h 2> /dev/null
194$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
195        @if test ! -f $@; then \
196                rm -f $(srcdir)/stamp-h.in; \
197                $(MAKE) $(srcdir)/stamp-h.in; \
198        else :; fi
199$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
200        cd $(top_srcdir) && $(AUTOHEADER)
201        @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
202
203mostlyclean-hdr:
204
205clean-hdr:
206
207distclean-hdr:
208        -rm -f config.h
209
210maintainer-clean-hdr:
211ggv.spec: $(top_builddir)/config.status ggv.spec.in
212        cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
213
214install-GraphicsDATA: $(Graphics_DATA)
215        @$(NORMAL_INSTALL)
216        $(mkinstalldirs) $(DESTDIR)$(Graphicsdir)
217        @list='$(Graphics_DATA)'; for p in $$list; do \
218          if test -f $(srcdir)/$$p; then \
219            echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(Graphicsdir)/$$p"; \
220            $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(Graphicsdir)/$$p; \
221          else if test -f $$p; then \
222            echo " $(INSTALL_DATA) $$p $(DESTDIR)$(Graphicsdir)/$$p"; \
223            $(INSTALL_DATA) $$p $(DESTDIR)$(Graphicsdir)/$$p; \
224          fi; fi; \
225        done
226
227uninstall-GraphicsDATA:
228        @$(NORMAL_UNINSTALL)
229        list='$(Graphics_DATA)'; for p in $$list; do \
230          rm -f $(DESTDIR)$(Graphicsdir)/$$p; \
231        done
232
233install-schemasDATA: $(schemas_DATA)
234        @$(NORMAL_INSTALL)
235        $(mkinstalldirs) $(DESTDIR)$(schemasdir)
236        @list='$(schemas_DATA)'; for p in $$list; do \
237          if test -f $(srcdir)/$$p; then \
238            echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(schemasdir)/$$p"; \
239            $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(schemasdir)/$$p; \
240          else if test -f $$p; then \
241            echo " $(INSTALL_DATA) $$p $(DESTDIR)$(schemasdir)/$$p"; \
242            $(INSTALL_DATA) $$p $(DESTDIR)$(schemasdir)/$$p; \
243          fi; fi; \
244        done
245
246uninstall-schemasDATA:
247        @$(NORMAL_UNINSTALL)
248        list='$(schemas_DATA)'; for p in $$list; do \
249          rm -f $(DESTDIR)$(schemasdir)/$$p; \
250        done
251
252# This directory's subdirectories are mostly independent; you can cd
253# into them and run `make' without going through this Makefile.
254# To change the values of `make' variables: instead of editing Makefiles,
255# (1) if the variable is set in `config.status', edit `config.status'
256#     (which will cause the Makefiles to be regenerated when you run `make');
257# (2) otherwise, pass the desired values on the `make' command line.
258
259@SET_MAKE@
260
261all-recursive install-data-recursive install-exec-recursive \
262installdirs-recursive install-recursive uninstall-recursive  \
263check-recursive installcheck-recursive info-recursive dvi-recursive:
264        @set fnord $(MAKEFLAGS); amf=$$2; \
265        dot_seen=no; \
266        target=`echo $@ | sed s/-recursive//`; \
267        list='$(SUBDIRS)'; for subdir in $$list; do \
268          echo "Making $$target in $$subdir"; \
269          if test "$$subdir" = "."; then \
270            dot_seen=yes; \
271            local_target="$$target-am"; \
272          else \
273            local_target="$$target"; \
274          fi; \
275          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
276           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
277        done; \
278        if test "$$dot_seen" = "no"; then \
279          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
280        fi; test -z "$$fail"
281
282mostlyclean-recursive clean-recursive distclean-recursive \
283maintainer-clean-recursive:
284        @set fnord $(MAKEFLAGS); amf=$$2; \
285        dot_seen=no; \
286        rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
287          rev="$$subdir $$rev"; \
288          test "$$subdir" != "." || dot_seen=yes; \
289        done; \
290        test "$$dot_seen" = "no" && rev=". $$rev"; \
291        target=`echo $@ | sed s/-recursive//`; \
292        for subdir in $$rev; do \
293          echo "Making $$target in $$subdir"; \
294          if test "$$subdir" = "."; then \
295            local_target="$$target-am"; \
296          else \
297            local_target="$$target"; \
298          fi; \
299          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
300           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
301        done && test -z "$$fail"
302tags-recursive:
303        list='$(SUBDIRS)'; for subdir in $$list; do \
304          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
305        done
306
307tags: TAGS
308
309ID: $(HEADERS) $(SOURCES) $(LISP)
310        list='$(SOURCES) $(HEADERS)'; \
311        unique=`for i in $$list; do echo $$i; done | \
312          awk '    { files[$$0] = 1; } \
313               END { for (i in files) print i; }'`; \
314        here=`pwd` && cd $(srcdir) \
315          && mkid -f$$here/ID $$unique $(LISP)
316
317TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
318        tags=; \
319        here=`pwd`; \
320        list='$(SUBDIRS)'; for subdir in $$list; do \
321   if test "$$subdir" = .; then :; else \
322            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
323   fi; \
324        done; \
325        list='$(SOURCES) $(HEADERS)'; \
326        unique=`for i in $$list; do echo $$i; done | \
327          awk '    { files[$$0] = 1; } \
328               END { for (i in files) print i; }'`; \
329        test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
330          || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))
331
332mostlyclean-tags:
333
334clean-tags:
335
336distclean-tags:
337        -rm -f TAGS ID
338
339maintainer-clean-tags:
340
341distdir = $(PACKAGE)-$(VERSION)
342top_distdir = $(distdir)
343
344# This target untars the dist file and tries a VPATH configuration.  Then
345# it guarantees that the distribution is self-contained by making another
346# tarfile.
347distcheck: dist
348        -rm -rf $(distdir)
349        GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
350        mkdir $(distdir)/=build
351        mkdir $(distdir)/=inst
352        dc_install_base=`cd $(distdir)/=inst && pwd`; \
353        cd $(distdir)/=build \
354          && ../configure --srcdir=.. --prefix=$$dc_install_base \
355          && $(MAKE) $(AM_MAKEFLAGS) \
356          && $(MAKE) $(AM_MAKEFLAGS) dvi \
357          && $(MAKE) $(AM_MAKEFLAGS) check \
358          && $(MAKE) $(AM_MAKEFLAGS) install \
359          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
360          && $(MAKE) $(AM_MAKEFLAGS) dist
361        -rm -rf $(distdir)
362        @banner="$(distdir).tar.gz is ready for distribution"; \
363        dashes=`echo "$$banner" | sed s/./=/g`; \
364        echo "$$dashes"; \
365        echo "$$banner"; \
366        echo "$$dashes"
367dist: distdir
368        -chmod -R a+r $(distdir)
369        GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
370        -rm -rf $(distdir)
371dist-all: distdir
372        -chmod -R a+r $(distdir)
373        GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
374        -rm -rf $(distdir)
375distdir: $(DISTFILES)
376        -rm -rf $(distdir)
377        mkdir $(distdir)
378        -chmod 777 $(distdir)
379        @for file in $(DISTFILES); do \
380          d=$(srcdir); \
381          if test -d $$d/$$file; then \
382            cp -pr $$d/$$file $(distdir)/$$file; \
383          else \
384            test -f $(distdir)/$$file \
385            || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
386            || cp -p $$d/$$file $(distdir)/$$file || :; \
387          fi; \
388        done
389        for subdir in $(SUBDIRS); do \
390          if test "$$subdir" = .; then :; else \
391            test -d $(distdir)/$$subdir \
392            || mkdir $(distdir)/$$subdir \
393            || exit 1; \
394            chmod 777 $(distdir)/$$subdir; \
395            (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
396              || exit 1; \
397          fi; \
398        done
399info-am:
400info: info-recursive
401dvi-am:
402dvi: dvi-recursive
403check-am: all-am
404check: check-recursive
405installcheck-am:
406installcheck: installcheck-recursive
407all-recursive-am: config.h
408        $(MAKE) $(AM_MAKEFLAGS) all-recursive
409
410install-exec-am:
411install-exec: install-exec-recursive
412
413install-data-am: install-GraphicsDATA install-schemasDATA \
414                install-data-local
415install-data: install-data-recursive
416
417install-am: all-am
418        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
419install: install-recursive
420uninstall-am: uninstall-GraphicsDATA uninstall-schemasDATA
421uninstall: uninstall-recursive
422all-am: Makefile $(DATA) config.h
423all-redirect: all-recursive-am
424install-strip:
425        $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
426installdirs: installdirs-recursive
427installdirs-am:
428        $(mkinstalldirs)  $(DESTDIR)$(Graphicsdir) $(DESTDIR)$(schemasdir)
429
430
431mostlyclean-generic:
432
433clean-generic:
434
435distclean-generic:
436        -rm -f Makefile $(CONFIG_CLEAN_FILES)
437        -rm -f config.cache config.log stamp-h stamp-h[0-9]*
438
439maintainer-clean-generic:
440mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic
441
442mostlyclean: mostlyclean-recursive
443
444clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am
445
446clean: clean-recursive
447
448distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
449        -rm -f libtool
450
451distclean: distclean-recursive
452        -rm -f config.status
453
454maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
455                maintainer-clean-generic distclean-am
456        @echo "This command is intended for maintainers to use;"
457        @echo "it deletes files that may require special tools to rebuild."
458
459maintainer-clean: maintainer-clean-recursive
460        -rm -f config.status
461
462.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
463uninstall-GraphicsDATA install-GraphicsDATA uninstall-schemasDATA \
464install-schemasDATA install-data-recursive uninstall-data-recursive \
465install-exec-recursive uninstall-exec-recursive installdirs-recursive \
466uninstalldirs-recursive all-recursive check-recursive \
467installcheck-recursive info-recursive dvi-recursive \
468mostlyclean-recursive distclean-recursive clean-recursive \
469maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
470distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
471dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
472install-exec-am install-exec install-data-local install-data-am \
473install-data install-am install uninstall-am uninstall all-redirect \
474all-am all installdirs-am installdirs mostlyclean-generic \
475distclean-generic clean-generic maintainer-clean-generic clean \
476mostlyclean distclean maintainer-clean
477
478
479@INTLTOOL_DESKTOP_RULE@
480
481install-schemas:
482        GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --shutdown
483        GCONF_CONFIG_SOURCE=$(GCONF_SCHEMA_CONFIG_SOURCE) $(GCONFTOOL) --makefile-install-rule $(top_srcdir)/ggv.schemas
484
485@INSTALL_SCHEMAS_TRUE@install-data-local: install-schemas
486
487# Tell versions [3.59,3.63) of GNU make to not export all variables.
488# Otherwise a system limit (for SysV at least) may be exceeded.
489.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.