source: trunk/third/gmake/make.info-8 @ 15972

This is make.info, produced by makeinfo version 4.0 from make.texinfo.

INFO-DIR-SECTION GNU Packages
START-INFO-DIR-ENTRY
* Make: (make).            Remake files automatically.
END-INFO-DIR-ENTRY

   This file documents the GNU Make utility, which determines
automatically which pieces of a large program need to be recompiled,
and issues the commands to recompile them.

   This is Edition 0.55, last updated 04 April 2000, of `The GNU Make
Manual', for `make', Version 3.79.

   Copyright (C) 1988, '89, '90, '91, '92, '93, '94, '95, '96, '97,
'98, '99, 2000         Free Software Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided that
the entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that this permission notice may be stated in a
translation approved by the Free Software Foundation.


File: make.info,  Node: Standard Targets,  Next: Install Command Categories,  Prev: Directory Variables,  Up: Makefile Conventions

Standard Targets for Users
==========================

   All GNU programs should have the following targets in their
Makefiles:

`all'
     Compile the entire program.  This should be the default target.
     This target need not rebuild any documentation files; Info files
     should normally be included in the distribution, and DVI files
     should be made only when explicitly asked for.

     By default, the Make rules should compile and link with `-g', so
     that executable programs have debugging symbols.  Users who don't
     mind being helpless can strip the executables later if they wish.

`install'
     Compile the program and copy the executables, libraries, and so on
     to the file names where they should reside for actual use.  If
     there is a simple test to verify that a program is properly
     installed, this target should run that test.

     Do not strip executables when installing them.  Devil-may-care
     users can use the `install-strip' target to do that.

     If possible, write the `install' target rule so that it does not
     modify anything in the directory where the program was built,
     provided `make all' has just been done.  This is convenient for
     building the program under one user name and installing it under
     another.

     The commands should create all the directories in which files are
     to be installed, if they don't already exist.  This includes the
     directories specified as the values of the variables `prefix' and
     `exec_prefix', as well as all subdirectories that are needed.  One
     way to do this is by means of an `installdirs' target as described
     below.

     Use `-' before any command for installing a man page, so that
     `make' will ignore any errors.  This is in case there are systems
     that don't have the Unix man page documentation system installed.

     The way to install Info files is to copy them into `$(infodir)'
     with `$(INSTALL_DATA)' (*note Command Variables::), and then run
     the `install-info' program if it is present.  `install-info' is a
     program that edits the Info `dir' file to add or update the menu
     entry for the given Info file; it is part of the Texinfo package.
     Here is a sample rule to install an Info file:

          $(DESTDIR)$(infodir)/foo.info: foo.info
                  $(POST_INSTALL)
          # There may be a newer info file in . than in srcdir.
                  -if test -f foo.info; then d=.; \
                   else d=$(srcdir); fi; \
                  $(INSTALL_DATA) $$d/foo.info $(DESTDIR)$@; \
          # Run install-info only if it exists.
          # Use `if' instead of just prepending `-' to the
          # line so we notice real errors from install-info.
          # We use `$(SHELL) -c' because some shells do not
          # fail gracefully when there is an unknown command.
                  if $(SHELL) -c 'install-info --version' \
                     >/dev/null 2>&1; then \
                    install-info --dir-file=$(DESTDIR)$(infodir)/dir \
                                 $(DESTDIR)$(infodir)/foo.info; \
                  else true; fi

     When writing the `install' target, you must classify all the
     commands into three categories: normal ones, "pre-installation"
     commands and "post-installation" commands.  *Note Install Command
     Categories::.

`uninstall'
     Delete all the installed files--the copies that the `install'
     target creates.

     This rule should not modify the directories where compilation is
     done, only the directories where files are installed.

     The uninstallation commands are divided into three categories,
     just like the installation commands.  *Note Install Command
     Categories::.

`install-strip'
     Like `install', but strip the executable files while installing
     them.  In many cases, the definition of this target can be very
     simple:

          install-strip:
                  $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
                          install

     Normally we do not recommend stripping an executable unless you
     are sure the program has no bugs.  However, it can be reasonable
     to install a stripped executable for actual execution while saving
     the unstripped executable elsewhere in case there is a bug.

`clean'
     Delete all files from the current directory that are normally
     created by building the program.  Don't delete the files that
     record the configuration.  Also preserve files that could be made
     by building, but normally aren't because the distribution comes
     with them.

     Delete `.dvi' files here if they are not part of the distribution.

`distclean'
     Delete all files from the current directory that are created by
     configuring or building the program.  If you have unpacked the
     source and built the program without creating any other files,
     `make distclean' should leave only the files that were in the
     distribution.

`mostlyclean'
     Like `clean', but may refrain from deleting a few files that people
     normally don't want to recompile.  For example, the `mostlyclean'
     target for GCC does not delete `libgcc.a', because recompiling it
     is rarely necessary and takes a lot of time.

`maintainer-clean'
     Delete almost everything from the current directory that can be
     reconstructed with this Makefile.  This typically includes
     everything deleted by `distclean', plus more: C source files
     produced by Bison, tags tables, Info files, and so on.

     The reason we say "almost everything" is that running the command
     `make maintainer-clean' should not delete `configure' even if
     `configure' can be remade using a rule in the Makefile.  More
     generally, `make maintainer-clean' should not delete anything that
     needs to exist in order to run `configure' and then begin to build
     the program.  This is the only exception; `maintainer-clean' should
     delete everything else that can be rebuilt.

     The `maintainer-clean' target is intended to be used by a
     maintainer of the package, not by ordinary users.  You may need
     special tools to reconstruct some of the files that `make
     maintainer-clean' deletes.  Since these files are normally
     included in the distribution, we don't take care to make them easy
     to reconstruct.  If you find you need to unpack the full
     distribution again, don't blame us.

     To help make users aware of this, the commands for the special
     `maintainer-clean' target should start with these two:

          @echo 'This command is intended for maintainers to use; it'
          @echo 'deletes files that may need special tools to rebuild.'

`TAGS'
     Update a tags table for this program.

`info'
     Generate any Info files needed.  The best way to write the rules
     is as follows:

          info: foo.info
          
          foo.info: foo.texi chap1.texi chap2.texi
                  $(MAKEINFO) $(srcdir)/foo.texi

     You must define the variable `MAKEINFO' in the Makefile.  It should
     run the `makeinfo' program, which is part of the Texinfo
     distribution.

     Normally a GNU distribution comes with Info files, and that means
     the Info files are present in the source directory.  Therefore,
     the Make rule for an info file should update it in the source
     directory.  When users build the package, ordinarily Make will not
     update the Info files because they will already be up to date.

`dvi'
     Generate DVI files for all Texinfo documentation.  For example:

          dvi: foo.dvi
          
          foo.dvi: foo.texi chap1.texi chap2.texi
                  $(TEXI2DVI) $(srcdir)/foo.texi

     You must define the variable `TEXI2DVI' in the Makefile.  It should
     run the program `texi2dvi', which is part of the Texinfo
     distribution.(1)  Alternatively, write just the dependencies, and
     allow GNU `make' to provide the command.

`dist'
     Create a distribution tar file for this program.  The tar file
     should be set up so that the file names in the tar file start with
     a subdirectory name which is the name of the package it is a
     distribution for.  This name can include the version number.

     For example, the distribution tar file of GCC version 1.40 unpacks
     into a subdirectory named `gcc-1.40'.

     The easiest way to do this is to create a subdirectory
     appropriately named, use `ln' or `cp' to install the proper files
     in it, and then `tar' that subdirectory.

     Compress the tar file file with `gzip'.  For example, the actual
     distribution file for GCC version 1.40 is called `gcc-1.40.tar.gz'.

     The `dist' target should explicitly depend on all non-source files
     that are in the distribution, to make sure they are up to date in
     the distribution.  *Note Making Releases: (standards)Releases.

`check'
     Perform self-tests (if any).  The user must build the program
     before running the tests, but need not install the program; you
     should write the self-tests so that they work when the program is
     built but not installed.

   The following targets are suggested as conventional names, for
programs in which they are useful.

`installcheck'
     Perform installation tests (if any).  The user must build and
     install the program before running the tests.  You should not
     assume that `$(bindir)' is in the search path.

`installdirs'
     It's useful to add a target named `installdirs' to create the
     directories where files are installed, and their parent
     directories.  There is a script called `mkinstalldirs' which is
     convenient for this; you can find it in the Texinfo package.  You
     can use a rule like this:

          # Make sure all installation directories (e.g. $(bindir))
          # actually exist by making them if necessary.
          installdirs: mkinstalldirs
                  $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
                                          $(libdir) $(infodir) \
                                          $(mandir)

     This rule should not modify the directories where compilation is
     done.  It should do nothing but create installation directories.

   ---------- Footnotes ----------

   (1) `texi2dvi' uses TeX to do the real work of formatting. TeX is
not distributed with Texinfo.


File: make.info,  Node: Install Command Categories,  Prev: Standard Targets,  Up: Makefile Conventions

Install Command Categories
==========================

   When writing the `install' target, you must classify all the
commands into three categories: normal ones, "pre-installation"
commands and "post-installation" commands.

   Normal commands move files into their proper places, and set their
modes.  They may not alter any files except the ones that come entirely
from the package they belong to.

   Pre-installation and post-installation commands may alter other
files; in particular, they can edit global configuration files or data
bases.

   Pre-installation commands are typically executed before the normal
commands, and post-installation commands are typically run after the
normal commands.

   The most common use for a post-installation command is to run
`install-info'.  This cannot be done with a normal command, since it
alters a file (the Info directory) which does not come entirely and
solely from the package being installed.  It is a post-installation
command because it needs to be done after the normal command which
installs the package's Info files.

   Most programs don't need any pre-installation commands, but we have
the feature just in case it is needed.

   To classify the commands in the `install' rule into these three
categories, insert "category lines" among them.  A category line
specifies the category for the commands that follow.

   A category line consists of a tab and a reference to a special Make
variable, plus an optional comment at the end.  There are three
variables you can use, one for each category; the variable name
specifies the category.  Category lines are no-ops in ordinary execution
because these three Make variables are normally undefined (and you
_should not_ define them in the makefile).

   Here are the three possible category lines, each with a comment that
explains what it means:

             $(PRE_INSTALL)     # Pre-install commands follow.
             $(POST_INSTALL)    # Post-install commands follow.
             $(NORMAL_INSTALL)  # Normal commands follow.

   If you don't use a category line at the beginning of the `install'
rule, all the commands are classified as normal until the first category
line.  If you don't use any category lines, all the commands are
classified as normal.

   These are the category lines for `uninstall':

             $(PRE_UNINSTALL)     # Pre-uninstall commands follow.
             $(POST_UNINSTALL)    # Post-uninstall commands follow.
             $(NORMAL_UNINSTALL)  # Normal commands follow.

   Typically, a pre-uninstall command would be used for deleting entries
from the Info directory.

   If the `install' or `uninstall' target has any dependencies which
act as subroutines of installation, then you should start _each_
dependency's commands with a category line, and start the main target's
commands with a category line also.  This way, you can ensure that each
command is placed in the right category regardless of which of the
dependencies actually run.

   Pre-installation and post-installation commands should not run any
programs except for these:

     [ basename bash cat chgrp chmod chown cmp cp dd diff echo
     egrep expand expr false fgrep find getopt grep gunzip gzip
     hostname install install-info kill ldconfig ln ls md5sum
     mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
     test touch true uname xargs yes

   The reason for distinguishing the commands in this way is for the
sake of making binary packages.  Typically a binary package contains
all the executables and other files that need to be installed, and has
its own method of installing them--so it does not need to run the normal
installation commands.  But installing the binary package does need to
execute the pre-installation and post-installation commands.

   Programs to build binary packages work by extracting the
pre-installation and post-installation commands.  Here is one way of
extracting the pre-installation commands:

     make -n install -o all \
           PRE_INSTALL=pre-install \
           POST_INSTALL=post-install \
           NORMAL_INSTALL=normal-install \
       | gawk -f pre-install.awk

where the file `pre-install.awk' could contain this:

     $0 ~ /^\t[ \t]*(normal_install|post_install)[ \t]*$/ {on = 0}
     on {print $0}
     $0 ~ /^\t[ \t]*pre_install[ \t]*$/ {on = 1}

   The resulting file of pre-installation commands is executed as a
shell script as part of installing the binary package.


File: make.info,  Node: Quick Reference,  Next: Error Messages,  Prev: Makefile Conventions,  Up: Top

Quick Reference
***************

   This appendix summarizes the directives, text manipulation functions,
and special variables which GNU `make' understands.  *Note Special
Targets::, *Note Catalogue of Implicit Rules: Catalogue of Rules, and
*Note Summary of Options: Options Summary, for other summaries.

   Here is a summary of the directives GNU `make' recognizes:

`define VARIABLE'
`endef'
     Define a multi-line, recursively-expanded variable.
     *Note Sequences::.

`ifdef VARIABLE'
`ifndef VARIABLE'
`ifeq (A,B)'
`ifeq "A" "B"'
`ifeq 'A' 'B''
`ifneq (A,B)'
`ifneq "A" "B"'
`ifneq 'A' 'B''
`else'
`endif'
     Conditionally evaluate part of the makefile.
     *Note Conditionals::.

`include FILE'
`-include FILE'
`sinclude FILE'
     Include another makefile.
     *Note Including Other Makefiles: Include.

`override VARIABLE = VALUE'
`override VARIABLE := VALUE'
`override VARIABLE += VALUE'
`override VARIABLE ?= VALUE'
`override define VARIABLE'
`endef'
     Define a variable, overriding any previous definition, even one
     from the command line.
     *Note The `override' Directive: Override Directive.

`export'
     Tell `make' to export all variables to child processes by default.
     *Note Communicating Variables to a Sub-`make': Variables/Recursion.

`export VARIABLE'
`export VARIABLE = VALUE'
`export VARIABLE := VALUE'
`export VARIABLE += VALUE'
`export VARIABLE ?= VALUE'
`unexport VARIABLE'
     Tell `make' whether or not to export a particular variable to child
     processes.
     *Note Communicating Variables to a Sub-`make': Variables/Recursion.

`vpath PATTERN PATH'
     Specify a search path for files matching a `%' pattern.
     *Note The `vpath' Directive: Selective Search.

`vpath PATTERN'
     Remove all search paths previously specified for PATTERN.

`vpath'
     Remove all search paths previously specified in any `vpath'
     directive.

   Here is a summary of the text manipulation functions (*note
Functions::):

`$(subst FROM,TO,TEXT)'
     Replace FROM with TO in TEXT.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

`$(patsubst PATTERN,REPLACEMENT,TEXT)'
     Replace words matching PATTERN with REPLACEMENT in TEXT.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

`$(strip STRING)'
     Remove excess whitespace characters from STRING.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

`$(findstring FIND,TEXT)'
     Locate FIND in TEXT.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

`$(filter PATTERN...,TEXT)'
     Select words in TEXT that match one of the PATTERN words.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

`$(filter-out PATTERN...,TEXT)'
     Select words in TEXT that _do not_ match any of the PATTERN words.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

`$(sort LIST)'
     Sort the words in LIST lexicographically, removing duplicates.
     *Note Functions for String Substitution and Analysis: Text
     Functions.

`$(dir NAMES...)'
     Extract the directory part of each file name.
     *Note Functions for File Names: File Name Functions.

`$(notdir NAMES...)'
     Extract the non-directory part of each file name.
     *Note Functions for File Names: File Name Functions.

`$(suffix NAMES...)'
     Extract the suffix (the last `.' and following characters) of each
     file name.
     *Note Functions for File Names: File Name Functions.

`$(basename NAMES...)'
     Extract the base name (name without suffix) of each file name.
     *Note Functions for File Names: File Name Functions.

`$(addsuffix SUFFIX,NAMES...)'
     Append SUFFIX to each word in NAMES.
     *Note Functions for File Names: File Name Functions.

`$(addprefix PREFIX,NAMES...)'
     Prepend PREFIX to each word in NAMES.
     *Note Functions for File Names: File Name Functions.

`$(join LIST1,LIST2)'
     Join two parallel lists of words.
     *Note Functions for File Names: File Name Functions.

`$(word N,TEXT)'
     Extract the Nth word (one-origin) of TEXT.
     *Note Functions for File Names: File Name Functions.

`$(words TEXT)'
     Count the number of words in TEXT.
     *Note Functions for File Names: File Name Functions.

`$(wordlist S,E,TEXT)'
     Returns the list of words in TEXT from S to E.
     *Note Functions for File Names: File Name Functions.

`$(firstword NAMES...)'
     Extract the first word of NAMES.
     *Note Functions for File Names: File Name Functions.

`$(wildcard PATTERN...)'
     Find file names matching a shell file name pattern (_not_ a `%'
     pattern).
     *Note The Function `wildcard': Wildcard Function.

`$(error TEXT...)'
     When this function is evaluated, `make' generates a fatal error
     with the message TEXT.
     *Note Functions That Control Make: Make Control Functions.

`$(warning TEXT...)'
     When this function is evaluated, `make' generates a warning with
     the message TEXT.
     *Note Functions That Control Make: Make Control Functions.

`$(shell COMMAND)'
     Execute a shell command and return its output.
     *Note The `shell' Function: Shell Function.

`$(origin VARIABLE)'
     Return a string describing how the `make' variable VARIABLE was
     defined.
     *Note The `origin' Function: Origin Function.

`$(foreach VAR,WORDS,TEXT)'
     Evaluate TEXT with VAR bound to each word in WORDS, and
     concatenate the results.
     *Note The `foreach' Function: Foreach Function.

`$(call VAR,PARAM,...)'
     Evaluate the variable VAR replacing any references to `$(1)',
     `$(2)' with the first, second, etc. PARAM values.
     *Note The `call' Function: Call Function.

   Here is a summary of the automatic variables.  *Note Automatic
Variables: Automatic, for full information.

`$@'
     The file name of the target.

`$%'
     The target member name, when the target is an archive member.

`$<'
     The name of the first prerequisite.

`$?'
     The names of all the prerequisites that are newer than the target,
     with spaces between them.  For prerequisites which are archive
     members, only the member named is used (*note Archives::).

`$^'
`$+'
     The names of all the prerequisites, with spaces between them.  For
     prerequisites which are archive members, only the member named is
     used (*note Archives::).  The value of `$^' omits duplicate
     prerequisites, while `$+' retains them and preserves their order.

`$*'
     The stem with which an implicit rule matches (*note How Patterns
     Match: Pattern Match.).

`$(@D)'
`$(@F)'
     The directory part and the file-within-directory part of `$@'.

`$(*D)'
`$(*F)'
     The directory part and the file-within-directory part of `$*'.

`$(%D)'
`$(%F)'
     The directory part and the file-within-directory part of `$%'.

`$(<D)'
`$(<F)'
     The directory part and the file-within-directory part of `$<'.

`$(^D)'
`$(^F)'
     The directory part and the file-within-directory part of `$^'.

`$(+D)'
`$(+F)'
     The directory part and the file-within-directory part of `$+'.

`$(?D)'
`$(?F)'
     The directory part and the file-within-directory part of `$?'.

   These variables are used specially by GNU `make':

`MAKEFILES'
     Makefiles to be read on every invocation of `make'.
     *Note The Variable `MAKEFILES': MAKEFILES Variable.

`VPATH'
     Directory search path for files not found in the current directory.
     *Note `VPATH' Search Path for All Prerequisites: General Search.

`SHELL'
     The name of the system default command interpreter, usually
     `/bin/sh'.  You can set `SHELL' in the makefile to change the
     shell used to run commands.  *Note Command Execution: Execution.

`MAKESHELL'
     On MS-DOS only, the name of the command interpreter that is to be
     used by `make'. This value takes precedence over the value of
     `SHELL'.  *Note MAKESHELL variable: Execution.

`MAKE'
     The name with which `make' was invoked.  Using this variable in
     commands has special meaning.  *Note How the `MAKE' Variable
     Works: MAKE Variable.

`MAKELEVEL'
     The number of levels of recursion (sub-`make's).
     *Note Variables/Recursion::.

`MAKEFLAGS'
     The flags given to `make'.  You can set this in the environment or
     a makefile to set flags.
     *Note Communicating Options to a Sub-`make': Options/Recursion.

     It is _never_ appropriate to use `MAKEFLAGS' directly on a command
     line: its contents may not be quoted correctly for use in the
     shell.  Always allow recursive `make''s to obtain these values
     through the environment from its parent.

`MAKECMDGOALS'
     The targets given to `make' on the command line.  Setting this
     variable has no effect on the operation of `make'.
     *Note Arguments to Specify the Goals: Goals.

`CURDIR'
     Set to the pathname of the current working directory (after all
     `-C' options are processed, if any).  Setting this variable has no
     effect on the operation of `make'.
     *Note Recursive Use of `make': Recursion.

`SUFFIXES'
     The default list of suffixes before `make' reads any makefiles.

`.LIBPATTERNS'
     Defines the naming of the libraries `make' searches for, and their
     order.
     *Note Directory Search for Link Libraries: Libraries/Search.


File: make.info,  Node: Error Messages,  Next: Complex Makefile,  Prev: Quick Reference,  Up: Top

Errors Generated by Make
************************

   Here is a list of the more common errors you might see generated by
`make', and some information about what they mean and how to fix them.

   Sometimes `make' errors are not fatal, especially in the presence of
a `-' prefix on a command script line, or the `-k' command line option.
Errors that are fatal are prefixed with the string `***'.

   Error messages are all either prefixed with the name of the program
(usually `make'), or, if the error is found in a makefile, the name of
the file and linenumber containing the problem.

   In the table below, these common prefixes are left off.

`[FOO] Error NN'
`[FOO] SIGNAL DESCRIPTION'
     These errors are not really `make' errors at all.  They mean that a
     program that `make' invoked as part of a command script returned a
     non-0 error code (`Error NN'), which `make' interprets as failure,
     or it exited in some other abnormal fashion (with a signal of some
     type).  *Note Errors in Commands: Errors.

     If no `***' is attached to the message, then the subprocess failed
     but the rule in the makefile was prefixed with the `-' special
     character, so `make' ignored the error.

`missing separator.  Stop.'
`missing separator (did you mean TAB instead of 8 spaces?).  Stop.'
     This means that `make' could not understand much of anything about
     the command line it just read.  GNU `make' looks for various kinds
     of separators (`:', `=', TAB characters, etc.) to help it decide
     what kind of commandline it's seeing.  This means it couldn't find
     a valid one.

     One of the most common reasons for this message is that you (or
     perhaps your oh-so-helpful editor, as is the case with many
     MS-Windows editors) have attempted to indent your command scripts
     with spaces instead of a TAB character.  In this case, `make' will
     use the second form of the error above.  Remember that every line
     in the command script must begin with a TAB character.  Eight
     spaces do not count.  *Note Rule Syntax::.

`commands commence before first target.  Stop.'
`missing rule before commands.  Stop.'
     This means the first thing in the makefile seems to be part of a
     command script: it begins with a TAB character and doesn't appear
     to be a legal `make' command (such as a variable assignment).
     Command scripts must always be associated with a target.

     The second form is generated if the line has a semicolon as the
     first non-whitespace character; `make' interprets this to mean you
     left out the "target: prerequisite" section of a rule.  *Note Rule
     Syntax::.

`No rule to make target `XXX'.'
`No rule to make target `XXX', needed by `YYY'.'
     This means that `make' decided it needed to build a target, but
     then couldn't find any instructions in the makefile on how to do
     that, either explicit or implicit (including in the default rules
     database).

     If you want that file to be built, you will need to add a rule to
     your makefile describing how that target can be built.  Other
     possible sources of this problem are typos in the makefile (if
     that filename is wrong) or a corrupted source tree (if that file
     is not supposed to be built, but rather only a prerequisite).

`No targets specified and no makefile found.  Stop.'
`No targets.  Stop.'
     The former means that you didn't provide any targets to be built
     on the command line, and `make' couldn't find any makefiles to
     read in.  The latter means that some makefile was found, but it
     didn't contain any default target and none was given on the
     command line.  GNU `make' has nothing to do in these situations.
     *Note Arguments to Specify the Makefile: Makefile Arguments.

`Makefile `XXX' was not found.'
`Included makefile `XXX' was not found.'
     A makefile specified on the command line (first form) or included
     (second form) was not found.

`warning: overriding commands for target `XXX''
`warning: ignoring old commands for target `XXX''
     GNU `make' allows commands to be specified only once per target
     (except for double-colon rules).  If you give commands for a target
     which already has been defined to have commands, this warning is
     issued and the second set of commands will overwrite the first set.
     *Note Multiple Rules for One Target: Multiple Rules.

`Circular XXX <- YYY dependency dropped.'
     This means that `make' detected a loop in the dependency graph:
     after tracing the prerequisite YYY of target XXX, and its
     prerequisites, etc., one of them depended on XXX again.

`Recursive variable `XXX' references itself (eventually).  Stop.'
     This means you've defined a normal (recursive) `make' variable XXX
     that, when it's expanded, will refer to itself (XXX).  This is not
     allowed; either use simply-expanded variables (`:=') or use the
     append operator (`+=').  *Note How to Use Variables: Using
     Variables.

`Unterminated variable reference.  Stop.'
     This means you forgot to provide the proper closing parenthesis or
     brace in your variable or function reference.

`insufficient arguments to function `XXX'.  Stop.'
     This means you haven't provided the requisite number of arguments
     for this function.  See the documentation of the function for a
     description of its arguments.  *Note Functions for Transforming
     Text: Functions.

`missing target pattern.  Stop.'
`multiple target patterns.  Stop.'
`target pattern contains no `%'.  Stop.'
     These are generated for malformed static pattern rules.  The first
     means there's no pattern in the target section of the rule, the
     second means there are multiple patterns in the target section,
     and the third means the target doesn't contain a pattern character
     (`%').  *Note Syntax of Static Pattern Rules: Static Usage.

`warning: -jN forced in submake: disabling jobserver mode.'
     This warning and the next are generated if `make' detects error
     conditions related to parallel processing on systems where
     sub-`make's can communicate (*note Communicating Options to a
     Sub-`make': Options/Recursion.).  This warning is generated if a
     recursive invocation of a `make' process is forced to have `-jN'
     in its argument list (where N is greater than one).  This could
     happen, for example, if you set the `MAKE' environment variable to
     `make -j2'.  In this case, the sub-`make' doesn't communicate with
     other `make' processes and will simply pretend it has two jobs of
     its own.

`warning: jobserver unavailable: using -j1.  Add `+' to parent make rule.'
     In order for `make' processes to communicate, the parent will pass
     information to the child.  Since this could result in problems if
     the child process isn't actually a `make', the parent will only do
     this if it thinks the child is a `make'.  The parent uses the
     normal algorithms to determine this (*note How the `MAKE' Variable
     Works: MAKE Variable.).  If the makefile is constructed such that
     the parent doesn't know the child is a `make' process, then the
     child will receive only part of the information necessary.  In
     this case, the child will generate this warning message and
     proceed with its build in a sequential manner.


File: make.info,  Node: Complex Makefile,  Next: Concept Index,  Prev: Error Messages,  Up: Top

Complex Makefile Example
************************

   Here is the makefile for the GNU `tar' program.  This is a
moderately complex makefile.

   Because it is the first target, the default goal is `all'.  An
interesting feature of this makefile is that `testpad.h' is a source
file automatically created by the `testpad' program, itself compiled
from `testpad.c'.

   If you type `make' or `make all', then `make' creates the `tar'
executable, the `rmt' daemon that provides remote tape access, and the
`tar.info' Info file.

   If you type `make install', then `make' not only creates `tar',
`rmt', and `tar.info', but also installs them.

   If you type `make clean', then `make' removes the `.o' files, and
the `tar', `rmt', `testpad', `testpad.h', and `core' files.

   If you type `make distclean', then `make' not only removes the same
files as does `make clean' but also the `TAGS', `Makefile', and
`config.status' files.  (Although it is not evident, this makefile (and
`config.status') is generated by the user with the `configure' program,
which is provided in the `tar' distribution, but is not shown here.)

   If you type `make realclean', then `make' removes the same files as
does `make distclean' and also removes the Info files generated from
`tar.texinfo'.

   In addition, there are targets `shar' and `dist' that create
distribution kits.

     # Generated automatically from Makefile.in by configure.
     # Un*x Makefile for GNU tar program.
     # Copyright (C) 1991 Free Software Foundation, Inc.
     
     # This program is free software; you can redistribute
     # it and/or modify it under the terms of the GNU
     # General Public License ...
     ...
     ...
     
     SHELL = /bin/sh
     
     #### Start of system configuration section. ####
     
     srcdir = .
     
     # If you use gcc, you should either run the
     # fixincludes script that comes with it or else use
     # gcc with the -traditional option.  Otherwise ioctl
     # calls will be compiled incorrectly on some systems.
     CC = gcc -O
     YACC = bison -y
     INSTALL = /usr/local/bin/install -c
     INSTALLDATA = /usr/local/bin/install -c -m 644
     
     # Things you might add to DEFS:
     # -DSTDC_HEADERS        If you have ANSI C headers and
     #                       libraries.
     # -DPOSIX               If you have POSIX.1 headers and
     #                       libraries.
     # -DBSD42               If you have sys/dir.h (unless
     #                       you use -DPOSIX), sys/file.h,
     #                       and st_blocks in `struct stat'.
     # -DUSG                 If you have System V/ANSI C
     #                       string and memory functions
     #                       and headers, sys/sysmacros.h,
     #                       fcntl.h, getcwd, no valloc,
     #                       and ndir.h (unless
     #                       you use -DDIRENT).
     # -DNO_MEMORY_H         If USG or STDC_HEADERS but do not
     #                       include memory.h.
     # -DDIRENT              If USG and you have dirent.h
     #                       instead of ndir.h.
     # -DSIGTYPE=int         If your signal handlers
     #                       return int, not void.
     # -DNO_MTIO             If you lack sys/mtio.h
     #                       (magtape ioctls).
     # -DNO_REMOTE           If you do not have a remote shell
     #                       or rexec.
     # -DUSE_REXEC           To use rexec for remote tape
     #                       operations instead of
     #                       forking rsh or remsh.
     # -DVPRINTF_MISSING     If you lack vprintf function
     #                       (but have _doprnt).
     # -DDOPRNT_MISSING      If you lack _doprnt function.
     #                       Also need to define
     #                       -DVPRINTF_MISSING.
     # -DFTIME_MISSING       If you lack ftime system call.
     # -DSTRSTR_MISSING      If you lack strstr function.
     # -DVALLOC_MISSING      If you lack valloc function.
     # -DMKDIR_MISSING       If you lack mkdir and
     #                       rmdir system calls.
     # -DRENAME_MISSING      If you lack rename system call.
     # -DFTRUNCATE_MISSING   If you lack ftruncate
     #                       system call.
     # -DV7                  On Version 7 Unix (not
     #                       tested in a long time).
     # -DEMUL_OPEN3          If you lack a 3-argument version
     #                       of open, and want to emulate it
     #                       with system calls you do have.
     # -DNO_OPEN3            If you lack the 3-argument open
     #                       and want to disable the tar -k
     #                       option instead of emulating open.
     # -DXENIX               If you have sys/inode.h
     #                       and need it 94 to be included.
     
     DEFS =  -DSIGTYPE=int -DDIRENT -DSTRSTR_MISSING \
             -DVPRINTF_MISSING -DBSD42
     # Set this to rtapelib.o unless you defined NO_REMOTE,
     # in which case make it empty.
     RTAPELIB = rtapelib.o
     LIBS =
     DEF_AR_FILE = /dev/rmt8
     DEFBLOCKING = 20
     
     CDEBUG = -g
     CFLAGS = $(CDEBUG) -I. -I$(srcdir) $(DEFS) \
             -DDEF_AR_FILE=\"$(DEF_AR_FILE)\" \
             -DDEFBLOCKING=$(DEFBLOCKING)
     LDFLAGS = -g
     
     prefix = /usr/local
     # Prefix for each installed program,
     # normally empty or `g'.
     binprefix =
     
     # The directory to install tar in.
     bindir = $(prefix)/bin
     
     # The directory to install the info files in.
     infodir = $(prefix)/info
     
     #### End of system configuration section. ####
     
     SRC1 =  tar.c create.c extract.c buffer.c \
             getoldopt.c update.c gnu.c mangle.c
     SRC2 =  version.c list.c names.c diffarch.c \
             port.c wildmat.c getopt.c
     SRC3 =  getopt1.c regex.c getdate.y
     SRCS =  $(SRC1) $(SRC2) $(SRC3)
     OBJ1 =  tar.o create.o extract.o buffer.o \
             getoldopt.o update.o gnu.o mangle.o
     OBJ2 =  version.o list.o names.o diffarch.o \
             port.o wildmat.o getopt.o
     OBJ3 =  getopt1.o regex.o getdate.o $(RTAPELIB)
     OBJS =  $(OBJ1) $(OBJ2) $(OBJ3)
     AUX =   README COPYING ChangeLog Makefile.in  \
             makefile.pc configure configure.in \
             tar.texinfo tar.info* texinfo.tex \
             tar.h port.h open3.h getopt.h regex.h \
             rmt.h rmt.c rtapelib.c alloca.c \
             msd_dir.h msd_dir.c tcexparg.c \
             level-0 level-1 backup-specs testpad.c
     
     all:    tar rmt tar.info
     
     tar:    $(OBJS)
             $(CC) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
     
     rmt:    rmt.c
             $(CC) $(CFLAGS) $(LDFLAGS) -o $@ rmt.c
     
     tar.info: tar.texinfo
             makeinfo tar.texinfo
     
     install: all
             $(INSTALL) tar $(bindir)/$(binprefix)tar
             -test ! -f rmt || $(INSTALL) rmt /etc/rmt
             $(INSTALLDATA) $(srcdir)/tar.info* $(infodir)
     
     $(OBJS): tar.h port.h testpad.h
     regex.o buffer.o tar.o: regex.h
     # getdate.y has 8 shift/reduce conflicts.
     
     testpad.h: testpad
             ./testpad
     
     testpad: testpad.o
             $(CC) -o $@ testpad.o
     
     TAGS:   $(SRCS)
             etags $(SRCS)
     
     clean:
             rm -f *.o tar rmt testpad testpad.h core
     
     distclean: clean
             rm -f TAGS Makefile config.status
     
     realclean: distclean
             rm -f tar.info*
     
     shar: $(SRCS) $(AUX)
             shar $(SRCS) $(AUX) | compress \
               > tar-`sed -e '/version_string/!d' \
                          -e 's/[^0-9.]*\([0-9.]*\).*/\1/' \
                          -e q
                          version.c`.shar.Z
     
     dist: $(SRCS) $(AUX)
             echo tar-`sed \
                  -e '/version_string/!d' \
                  -e 's/[^0-9.]*\([0-9.]*\).*/\1/' \
                  -e q
                  version.c` > .fname
             -rm -rf `cat .fname`
             mkdir `cat .fname`
             ln $(SRCS) $(AUX) `cat .fname`
             tar chZf `cat .fname`.tar.Z `cat .fname`
             -rm -rf `cat .fname` .fname
     
     tar.zoo: $(SRCS) $(AUX)
             -rm -rf tmp.dir
             -mkdir tmp.dir
             -rm tar.zoo
             for X in $(SRCS) $(AUX) ; do \
                 echo $$X ; \
                 sed 's/$$/^M/' $$X \
                 > tmp.dir/$$X ; done
             cd tmp.dir ; zoo aM ../tar.zoo *
             -rm -rf tmp.dir