source: trunk/third/gtk-doc/ChangeLog @ 20745

2004-02-16  Damon Chaplin  <damon@gnome.org>

        * Released 1.2.

2004-02-16  Damon Chaplin  <damon@gnome.org>

        * gtk-doc.cat.in: removed public ID for gtk-doc.dtd, since we don't
        use it any more.

Sat Feb 14 02:14:27 2004  Matthias Clasen  <maclas@gmx.de>

        * gtk-doc.m4: Avoid unnecessary checks if gtk-doc is 
        disabled.  (#134221, Julio M. Merino Vidal)

Sat Feb 14 02:03:01 2004  Matthias Clasen  <maclas@gmx.de>

        * gtk-doc.make: Don't create unneeded empty 
        directories.  (#134319, Julio M. Merino Vidal)

Sat Feb 14 01:37:38 2004  Matthias Clasen  <maclas@gmx.de>

        * gtk-doc.make: Add an empty all-local target to make it work
        with non-GNU make.  (#134343, Julio M. Merino Vidal)

Wed Jan 28 00:52:00 2004  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (OutputObjectList): Avoid emitting invalid
        docbook markup if there are no objects. Partial fix for #132661.

Sun Jan 25 22:01:15 2004  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in: Accept both the old and the new XInclude
        namespace.  (#131675, Edd Dumbill)

2004-01-23  Thomas Vander Stichele  <thomas at apestaart dot org>

        * gtkdoc-mkhtml.in: exit when tools return non-zero so errors can
          be caught.

Thu Jan 15 23:06:10 2004  Matthias Clasen  <maclas@gmx.de>

        * gtk-doc.xsl: Set the chunk.fast parameter, to gain some
        speed.

Thu Jan 15 23:05:23 2004  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-fixxref.in: Make it work again without explicit 
        --module.

Sat Dec 27 01:36:08 2003  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: 
        * gtkdoc-mktmpl.in: 
        * gtkdoc-scan.in: 
        * gtkdoc-fixxref.in: Add --help.  (#126915)

Sat Dec 27 00:43:42 2003  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (ParseEnumDeclaration): 
        * gtkdoc-mktmpl.in (ParseEnumDeclaration): Support a trailing ,
        in enum declarations. These are a GNU C extension, but also 
        blessed by C99.  (#129949, Thomas Vander Stichele)

Sun Nov 16 00:29:03 2003  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: Don't use g_strdown(). (#127028, 
        David Schleef)

Sun Nov 16 00:26:05 2003  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: If compiled against GLib >= 2.3.0, look
        for properties on interfaces.  (#127068, James M. Cape)

2003-11-03  Dan Winship  <danw@ximian.com>

        * gtkdoc-scangobj.in: Clean up $MODULE-scan.o even when using
        libtool

        * gtkdoc-scanobj.in: Likewise

        * gtk-doc.make (CLEANFILES): Remove $(MODULE)-scan.o from here
        (clean-local): rm -rf .libs
        
Wed Oct  8 01:21:54 2003  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scan.in (ScanHeader): Make gtkdoc-scan grok 
        typedef struct { } foo; in addition to the more baroque
        typedef struct _foo foo; struct _foo { };
        (#116807, Malcolm Tredinnick)

Wed Oct  8 01:21:35 2003  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (OutputParamDescriptions): Remove a pointless 
        warning.

2003-10-01  Matthias Clasen  <maclas@gmx.de>

        Make signals and properties end up in the right template 
        file (#116569, Owen Taylor):

        * gtkdoc-mktmpl.in (OutputSignalTemplates): 
        (OutputArgTemplates): Return a string rather than directly 
        writing to OUTPUT. 
        (OutputTemplateFile): Don't interpret $title as the name of 
        the object to print signal and property templates for.
        (UpdateTemplates): Collect signal and property templates for all
        objects contained in the section.

2003-08-10  James Henstridge  <james@daa.com.au>

        * acinclude.m4 (JH_PATH_XML_CATALOG): allow caller to specify
        actions if found or not found.
        (JH_CHECK_XML_CATALOG): when requiring JH_PATH_XML_CATALOG, don't
        error out if it is not found.

2003-08-03  Matthias Clasen  <maclas@gmx.de>

        * doc/gnome.txt: Add some hints regarding markup of examples. 

2003-07-22  Matthias Clasen  <maclas@gmx.de>

        * configure.in: 
        * gtk-doc.cat: Fix a problem with the previous commit.

2003-07-21  Matthias Clasen  <maclas@gmx.de>

        Applied patches from Sebastian Rittau to add maintainer mode and an SGML catalog.  (#117955, #117956)

        * gtk-doc.cat.in: New catalog file.
        * configure.in: Added gtk-doc.catalog to output files.
        * Makefile.am: Install gtk-doc.catalog.

        * configure.in: Added AM_MAINTAINER_MODE.
        * autogen.sh: Added --enable-maintainer-mode to configure options.

2003-07-09  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mktmpl.in (ParseStructDeclaration): 
        * gtkdoc-mkdb.in (ParseStructDeclaration): Accept volatile struct members, which have just
        made their appearance in glib.

2003-06-29  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (ExpandAbbreviations): When expanding @param, catch the common @param->field
        and @param.field, to reduce the need for littering the C sources with <literal>foo->bar</literal>.

2003-06-25  Matthias Clasen  <maclas@gmx.de>

        Changes for #115528:
        
        * gtkdoc-mkdb.in (OutputSGML): Collect hierarchy, interfaces, implementations, prerequisites
        and derived interfaces separately.
        (OutputSGMLFile): Take two more arguments: implementations and derived interfaces.
        (GetHierarchy): Also put immediate children in the local tree.
        (GetInterfaces): Split into GetInterfaces and GetImplementations.
        (GetImplementations): New function to get the implementations of an interface.
        (GetDerived): New function to get the known derived interfaces of an interface.

        * gtkdoc-mkdb.in (MakeXRef): Accept a second, optional parameter for the
        text of the link.
        (ExpandAbbreviations): Add semantic markup inside the links, so that 
        non-crossreferenced symbols come out properly formatted after link
        removal.  (#61345)

2003-06-15  Matthias Clasen  <maclas@gmx.de>

        Support for a flat index of all symbols.  (#92861)
        To use, put an empty <index/> element in your driver document. 
        
        * gtkdoc-mkdb.in (MakeIndexterms): New function, emits an indexterm.
        (OutputMacro, OutputTypedef, OutputStruct, OutputEnum,
        OutputUnion, OutputVariable, OutputFunction): Use MakeIndexterms.
        to emit indexterms for symbols. 
        
        * gtkdoc-mkdb.in (GetSignals): 
        (GetArgs): Emit Since: information for signals and properties.

Thu Jun 12 15:55:57 2003  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mkhtml.in (declaration): Replace head -1 with -n 1.
        (Merge change by Elliot Lee from Red Hat package)

2003-06-11  Matthias Clasen  <maclas@gmx.de>

        * doc/gnome.txt: Updates to the documentation of inline comments.

2003-06-03  Matthias Clasen  <maclas@gmx.de>

        * gtk-doc.spec.in: Add a missing Provides: and include the .pc file.  
        (#106568, Joe Pranevich)

2003-05-27  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (GetSignals): 
        (GetArgs): Add signals and properties to the statistics.
        (OutputMissingDocumentation): Emit undocumented signals and
        properties.  (#113645)

2003-04-21  Matthias Clasen  <maclas@gmx.de>

        * tools/docpercentages.pl: Fix autolinkification for undocumented
        symbols.  

        * doc/style-guide.txt: Typo fix.

2003-04-18  James Henstridge  <james@daa.com.au>

        * NEWS: add news items.

        * configure.in: increment version number.

2003-03-14  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (OutputBook): Fix the public identifier for
        DocBook V3.0: Davenport, not DavenPort.  
        (#108343, Mariano Suarez-Alvarez) 

2003-03-10  James Henstridge  <james@daa.com.au>

        * configure.in: associate the chmod commands with the files they
        are chmod'ing.  This way config.status will always run the correct
        chmod command.

2003-03-04  James Henstridge  <james@daa.com.au>

        * configure.in: look up the docbook DTD by public id rather than
        system id.

2003-02-26  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (GetArgs): Prefer template or comment docs over
        blurbs only if they're nonempty, otherwise the empty docs from the
        templates override all the blurbs.

2003-02-26  James Henstridge  <james@daa.com.au>

        * autogen.sh (THEDIR): set up so that it will choose automake 1.7
        or 1.6 in preference to 1.4.  Passes distcheck okay.

        * configure.in: update configure.in script to match
        recommendations of newer autoconf's, and add an AC_PREREQ()
        statement, since the xml catalog checks are using new autoconf
        features.

        * gtk-doc.make (xml-build.stamp): since other bits of the makefile
        were assuming xml, may as well hard code --output-format=xml.

2003-02-19  James Henstridge  <james@daa.com.au>

        * Makefile.am: get rid of the dist-hook, and just include the
        given files in EXTRA_DIST instead.

        * configure.in: provide meaningful names for the commands.

        * acinclude.m4 (JH_CHECK_XML_CATALOG): add some extra arguments: a
        friendly name for the catalog entry, and actions to run if the
        entry was found or not.  Also include a bit more information in
        the config.log file if an error occurs.

2003-02-18  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkhtml.in (declaration): Avoid the unportable grep 
        option -q.  (#105311)

2003-02-19  James Henstridge  <james@daa.com.au>

        * devhelp.xsl: put chapters that aren't at the top level into the
        toc tree (to make gtk's .devhelp tree look better).

        * gtk-doc.spec.in (Requires): make the requires lines match
        current requirements ...

        * gtkdoc-mkhtml.in (XSLTPROC): pass --nonet to xsltproc, so we
        don't try to download DTDs and XSLT over the net.  The configure
        checks should catch people who don't have the correct files in
        their catalog.

2003-02-17  James Henstridge  <james@daa.com.au>

        * gtkdocize.in (--version): add --version argument.

2003-02-14  James Henstridge  <james@daa.com.au>

        * gtkdoc-mkdb.in (GetOptions): actually accept --tmpl-dir as a
        command line option.  Based on a patch from Simon Josefsson
        <jas@extundo.com>.

        * gtk-doc.xsl: remove the xmlns declaration.  Not really needed
        for html output anyway ...

2003-02-13  James Henstridge  <james@daa.com.au>

        * devhelp.xsl: remove refsect1's and refsect2's from book tree, as
        suggested by Hallski.

        * gtk-doc.make (install-data-local): the change to install images
        was superfluous, so I have removed it.
        (CLEANFILES): move some more stuff to CLEANFILES from the
        distclean-local rule.

2003-02-12  James Henstridge  <james@daa.com.au>

        * gtk-doc.make: add some chmod calls to work arround distcheck on
        automake >= 1.6.
        (install-data-local): copy the images as well as the html files
        during install.
        (uninstall-local): add an uninstall rule to remove the docs.
        (CLEANFILES): add $(DOC_MODULE)-scan.o to the list of files to be
        cleaned up.

2003-02-09  James Henstridge  <james@daa.com.au>

        * gtkdocize.in: script used to copy gtk-doc.make into another
        module.

        * gtk-doc.make: automake makefile fragment to handle gtk-doc
        support in other modules.

        * configure.in: check to make sure DocBook XML DTD and XSLT
        stylesheets are present in the XML catalog.

        * acinclude.m4 (JH_CHECK_XML_CATALOG): new macro to check for
        entries in the XML catalog.

2003-02-04  James Henstridge  <james@daa.com.au>

        * gtk-doc.m4: a macro to check for gtk-doc.

        * Makefile.am (gtkdocdata_DATA): don't bother installing xml.dcl.
        It isn't used anymore (since switching xml mode to xsltproc).

        * gtkdoc-mkhtml.in (gtkdocdir): and here.

        * Makefile.am (gtkdocdatadir): change dir.

        * configure.in: put data files in $(datadir)/gtk-doc/data, so that
        they don't all get mixed up with the html docs installed by other
        packages.

2003-01-20  Damon Chaplin  <damon@gnome.org>

        * Released 1.0.

2003-01-20  Damon Chaplin  <damon@gnome.org>

        * configure.in: bumped version to 1.0, and added SGML_OUTPUT_TYPE
        variable, which we set to 'sgml-raw' if we have openjade, or 'sgml'
        if we have jade. Added gtk-doc.pc to AC_OUTPUT.

        * gtkdoc-mkhtml.in: used SGML_OUTPUT_TYPE variable to set the output
        type of jade/openjade.

        * gtk-doc.pc.in: new pkg-config file, which apps can use to reliably
        check the gtk-doc version in future.

        * Makefile.am (pkgconfigdir): install .pc file, and add it to
        EXTRA_DIST.

        * examples/configure.in: updated example to use pkg-config for the
        version check.

2003-01-18  James Henstridge  <james@daa.com.au>

        * gtkdoc-mkhtml.in (declaration): switch the output type from
        "sgml" to "sgml-raw" when using Jade to process docs.  This gets
        rid of the line breaks inside the tags, which were confusing Lynx.

2003-01-15  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scan.in (ScanHeader): Remove special cases for Pango and
        Bonobo.
        * gtkdoc-mkdb.in (OutputDeclaration): 
        * gtkdoc-mktmpl.in (OutputDeclaration): Remove special cases for
        structs named BlablaClass.  (#95398)

        * gtkdoc-mkdb.in (GetInterfaces): Fix an off-by-one error.
        (#103466, Josh Parsons)

2002-12-28 Chema Celorio <chema@celorio.com>

        * gtkdoc-scan[g]obj.in: add "void" to functions with no parameters,
        avoids warning with -Wmissing-prototypes when compiling
        {module}-scan.c

2002-12-16  James Henstridge  <james@daa.com.au>

        * gtk-doc.spec.in: require perl >= 5.6.0

        * configure.in: require Perl >= 5.6.0

        * gtkdoc-fixxref.in: add "use bytes;" to fix malformed UTF-8
        character errors when run with a UTF-8 locale.

2002-12-16  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (OutputSGMLFile): Don't emit the additional
        anchors in the title which breaks the generated html (the title
        text is copied around). Instead, put the anchors before the
        synopsis. This isn't perfect, but the best we can achieve without
        stylesheet hackery.

2002-12-13  Matthias Clasen  <maclas@gmx.de>
        
        * gtkdoc-mkdb.in: Add an --ignore-files option which can be used
        to omit files or directories from scanning.
        (OutputSGMLFile): Emit anchors for all objects contained in the
        file to avoid dangling links.
        (OutputMissingDocumentation): Emit deprecated symbols after
        undeprecated ones.

2002-12-12  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scan.in (ScanHeader): Also recognize "positive" guards
        like #ifdef GTK_ENABLE_BROKEN.

2002-12-11  Matthias Clasen  <maclas@gmx.de>

        * gtk-doc.xsl: Change XPath path to "//anchor|//refentry" for the 
        generation of index.sgml. The previous path "//anchor|refentry"
        was not matching any refentrys.

2002-12-09  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mktmpl.in (UpdateTemplates): Emit unused class structs
        to $MODULE-unused.txt.

2002-12-08  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (OutputStruct): Don't emit private parts
        of class structs to parameter lists in docs. Remove leftover
        debugging output.

        * gtkdoc-mktmpl.in (OutputDeclaration): Don't emit private parts
        of class structs to parameter lists in templates.

2002-12-06  Matthias Clasen  <maclas@gmx.de>

        Improved /*< private >*/ handling:  (#95398)
        
        * gtkdoc-mkdb.in (OutputStruct): Handle /*< public >*/ and 
        /*< private >*/ for all structs. Default to private for object and 
        class structs, to public for all other structs.

        * gtkdoc-scan.in (ScanHeader): Emit declarations for class structs
        to $MODULE-decl.txt.

2002-12-05  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mktmpl.in (OutputDeclaration): 
        * gtkdoc-mkdb.in (ReadTemplateFile): Support @Since: and
        @Deprecated: as a way to specify since and deprecated information
        in template files. This works for all kinds of symbols, even those
        which normally don't have parameter lists.

2002-12-02  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (MakeDeprecationNote): Support multi-paragraph 
        deprecation notes.

2002-11-29  James Henstridge  <james@daa.com.au>

        * gtkdoc-mkhtml.in: copy the navigation images for both XML and
        SGML cases.

        * gtk-doc.dsl.in: update DSSSL stylesheets to match layout of XSL
        ones.

2002-11-29  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scan.in (ScanHeader): Make deprecation guards work with
        both 
        #ifndef DEPRECATION_GUARD  
        #if !defined(DEPRECATION_GUARD) || defined(FOO_COMPILATION)
        The second form is used in GDK and GTK+ to include selected
        deprecated symbols when compiling the library itself.

2002-11-27  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in: Parse to new tags in inline doc comments,
        Since: and Deprecated:, which can be placed after the Returns:
        tag. Emit the Since: information (which is expected to be just a
        version number) after the parameters and the Deprecated:
        information (which is expected to be one or more full sentences)
        inside the deprecation warning. 
        Warn if a Deprecated: tag is found on a symbol which is not
        guarded by a deprecation guard in the header.

2002-11-26  James Henstridge  <james@daa.com.au>

        * gtkdoc-mkhtml.in: set gtkdoc-bookname and gtkdoc-version
        parameters in sgml mode, and don't bother with the sed run after
        processing with jade.
        In XML mode, pass the version number in as a parameter too.

        * gtk-doc.dsl.in ($user-html-header$): add <meta> tag if
        gtkdoc-version is set.
        (generate-index-mode): if gtkdoc-bookname is set, add it to the
        hrefs in the index file, like the XSLT sheets do.

        * gtk-doc.xsl: add gtkdoc.version parameter, and use it to add a
        <meta> tag with the gtk-doc version number.

2002-11-16  Damon Chaplin  <damon@gnome.org>

        * Released 0.10.

2002-11-16  Damon Chaplin  <damon@gnome.org>

        * configure.in: bumped version to 0.10.

        * Makefile.am (EXTRA_DIST): added MAINTAINERS.

        * README: updated requirements info, mainly to add XML stuff.

        * NEWS: added news for 0.10

        * MAINTAINERS: 
        * AUTHORS: updated my email address.

2002-11-16  James Henstridge  <james@daa.com.au>

        * gtk-doc.xsl: output HTML in ISO-8859-1 (latin1), as using UTF-8
        can trigger misinterpretation of web pages when the web server
        asserts that the document is encoded in latin1 in the mime type.

2002-11-15  James Henstridge  <james@daa.com.au>

        * gtk-doc.xsl: small changes to make the output closer to valid
        HTML.

        * gtkdoc-fixxref.in (MakeXRef): when substituting in cross
        references, use lower case element and attribute names, and quote
        the attribute value.

2002-11-12  James Henstridge  <james@daa.com.au>

        * gtkdoc-mkdb.in: put content of parameter descriptions in
        <simpara> elements instead of <para>'s.  This makes the generated
        HTML more compact, as it will omit the <p> tag inside the list
        item.

        * gtk-doc.xsl: adjust stylesheet a little.

2002-11-10  James Henstridge  <james@daa.com.au>

        * gtk-doc.xsl: change style for documentation.

        * gtkdoc-mkhtml.in (declaration): copy PNG files to the html
        directory.

2002-11-10  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (GetArgs): Expand abbreviations in source doc 
        comments.       

2002-11-09  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mktmpl.in (OutputSignalTemplates): Don't replace template
        param names with meaningless argn names generated by gtkdoc-scangobj.

        * gtkdoc-mkdb.in (GetSignals): Use argument names from source doc
        comments, if available. 
        (GetArgs): Use source doc comments instead of blurb, if available.
        (ScanSourceFile): Also accept object::signal and object:property
        symbols.
        (MergeSourceDocumentation): For signals only, prefer source doc
        param names over template param names.

Fri Nov  8 15:10:57 2002  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mkdb.in (GetPrerequisites): Add missing <para>
        here too.

Mon Nov  4 17:17:40 2002  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mkdb.in (MergeSourceDocumentation): Warn
        when overriding docs in template file by inline comments.

        * gtkdoc-mkdb.in (GetInterfaces): Add missing <para> in
        "Implemented interfaces" output.

2002-10-29  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-scangobj.in: in get_type_name() set is_pointer to TRUE for
        subtypes of G_TYPE_BOXED and G_TYPE_POINTER. This means we get things
        like "GtkTreeIter *iter" rather than "GtkTreeIter iter" which was
        incorrect. Also return 'GParamSpec*' for G_TYPE_PARAM.
        in lookup_signal_arg_names() changed GtkNotebook::switch-page
        page argument to guint. And fixed a few other entries.
        Also fixed argument numbering, so we don't get 2 "widget" arguments.
        
        * gtkdoc-scanobj.in: add ';' after unlink command to avoid warning.

2002-10-20  Matthias Clasen  <maclas@gmx.de>

        * examples/Makefile.am (SCANOBJ_FILES): Add $(DOC_MODULE).prerequisites.

        * gtkdoc-mkdb.in: Read $MODULE.prerequisites and put list of 
        prerequisites below the object hierarchy for interfaces.

        * gtkdoc-scangobj.in: Write information about interface
        prerequisites to $MODULE.prerequisites.

2002-10-15  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: Sort paramspec arrays for
        greater stability and less random tmpl file diffs.

2002-10-14  Matthias Clasen  <maclas@gmx.de>

        * examples/Makefile.am (SCANOBJ_FILES): Add $(DOC_MODULE).interfaces.

        * gtkdoc-mkdb.in: Read $MODULE.interfaces and put lists of 
        implemented interfaces/known implementations below the object 
        hierarchy for classes/interfaces.

        * gtkdoc-scangobj.in: Write interface information to 
        $MODULE.interfaces.

2002-10-12  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: Make interface appear in the object hierarchy.

2002-10-11  Matthias Clasen  <maclas@gmx.de>

        * gtk-doc.xsl: use 'UTF-8', not UTF-8 for default.encoding, to
        make the encoding actually appear in the resulting HTML.

2002-10-09  James Henstridge  <james@daa.com.au>

        * gtkdoc-mkdb.in: set $doctype_header to "" for the SGML case, as
        we don't add a doctype to the beginning of SGML fragments.

Tue Sep 17 01:07:51 2002  Jonathan Blandford  <jrb@gnome.org>

        * gtk-doc.xsl: output the chunks in UTF-8 so other tools can use
        them.

2002-09-03  James Henstridge  <james@daa.com.au>

        * gtk-doc.xsl: turn on rendering of variablelists as tables, and
        set CSS rules to style .variablelist instead of .informaltable.

        * gtk-doc.dsl.in (variablelist): override the variablelist handler
        instead of the tgroups.

        * gtkdoc-mkdb.in (OutputStruct): use a <variablelist> for listing
        the field descriptions.
        (OutputEnum): same here.
        (OutputParamDescriptions): and here.

2002-08-12  James Henstridge  <james@daa.com.au>

        * gtk-doc.xsl: include devhelp.xsl, and call generate.devhelp when
        processing the docbook/xml input.

        * devhelp.xsl: new file, implements .devhelp file output.

2002-08-18  Havoc Pennington  <hp@pobox.com>

        * autogen.sh: hardcode aclocal-1.4/automake-1.4 so that users with
        both automake 1.6 and 1.4 installed get the right automake. Means
        compilation from CVS will now require the latest automake 1.4
        release, or manually creating symlinks called "automake-1.4" and
        "aclocal-1.4"

2002-08-08  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: Make sure blurbs end with a '.'

2002-08-08  James Henstridge  <james@daa.com.au>

        * gtk-doc.xsl: add a gtkdoc.bookname param, and include it in the
        index.sgml output (if not empty).

        * gtkdoc-mkhtml.in: only perform the sed operation if we are using
        Jade, and pass the module name as a parameter when using xsltproc.

2002-08-04  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: Don't try to list signals on types which
        don't support signals, e.g. boxed types.

2002-06-14  jacob berkman  <jacob@ximian.com>

        * gtkdoc-mkdb.in: do the version check before help, so --version
        doesn't output --help (should fix recent build bustage)

2002-06-12  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in: Make header-grabbing work without an explicit
        --main-sgml-file argument.
        
        * gtkdoc-mkdb.in: Emit the object hierarchy as a <screen> rather
        than a <literallayout>, since the Docbook XSL stylesheets don't
        handle <link>s inside <literallayout>. 
        
        * gtkdoc-mkdb.in: Decide wether to generate standalone documents 
        for XIncluding or entities based on the presence of the XInclude 
        namespace declaration on the document element.

2002-06-09  James Henstridge  <james@daa.com.au>

        * gtkdoc-mkdb.in: try to grab the header off the top of the main
        sgml file.

2002-05-31  James Henstridge  <james@daa.com.au>

        * gtkdoc-mkdb.in (OutputSGML): put XIncludes in the $book_bottom
        variable.
        (OutputBook): add the XInclude namespace declaration to the book
        element.

        * gtkdoc-mkhtml.in (declaration): if the document looks like XML,
        process it with xsltproc.

        * configure.in: check for xsltproc.

        * gtk-doc.xsl: start of XSLT template for converting docbook/xml
        to HTML.

2002-06-03  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (ConvertSGMLChars): Don't use Posix character
        classes. Perl < 5.6 doesn't have them; and the API doc autobuilder
        on widget.gnome.org has an old Perl. 

2002-05-29  Matthias Clasen  <maclas@gmx.de>

        Fixes for #77193:
        
        * gtkdoc-mkdb.in (OutputSGML): Call GetSignals, GetArgs and
        GetHierarchy for each symbol here and accumulate.
        (OutputSGMLFile): Get signal, argument and hierarchy information
        from the caller.
        (GetSignals, GetArgs, GetHierarchy): Don't wrap the return value
        in a refsect1, so that the results of multiple calls can be accumulated.

2002-05-28  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (ConvertSGMLChars): Make this work correctly
        for empty elements and XML comments in doc comments.

2002-05-27  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (ReadTemplateFile, OutputSGMLFile): 
        Use only the basename of the template file in the key for the
        symbol table, in order to decouple the file extensions of the
        template files and the generated entities (we want to generate
        .xml entities from .sgml template files when emitting XML). 

2002-05-25  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (ConvertSGMLChars): New function which tries to
        be a bit more clever when escaping SGML syntax characters. 
        (ScanSourceFile): Use ConvertSGMLChars instead of CreateValidSGML.
        This reduces the work needed to make gtk-doc emit XML (where <, &
        and friends must always be escaped).

2002-05-18  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkhtml.in: Detect whether we're processing SGML or XML. 

        * gtkdoc-mkdb.in: New option --output-format to switch between
        SGML and XML output.

        * Makefile.am (EXTRA_DIST): Add xml.dcl
        
        * xml.dcl: The XML declaration.

2002-05-06  jacob berkman  <jacob@ximian.com>

        * gtkdoc-scangobj.in: add an include for the GTK_CHECK_VERSION
        macro

2002-05-05  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: Output style properties.  (#80659)

        * gtkdoc-mkdb.in (GetArgs): Return separate sections for
        properties, child properties and style properties.  (#80659)

2002-05-03  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in: Fix for segfault in scangobj-generated C
        program on Solaris.  (#80606, Jacob Berkman)

2002-05-01  Matthias Clasen  <maclas@gmx.de>

        * tools/docpercentages.pl: Add the script which Owen uses for the 
        d.g.o online API docs. Its easier to keep in sync here.

        * gtkdoc-mkdb.in (OutputMissingDocumentation): Fix
        $MODULE-undocumented.txt for d.g.o online API docs.
        
        * gtkdoc-mkdb.in (GetArgs): Use blurbs for property documentation.

        * gtkdoc-scangobj.in: Output child properties. Output nicks and
        blurbs for properties.

2002-04-28  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-mkdb.in (ScanSourceFile): Don't scan for return value
        descriptions unnecessarily.  (#65997)

2002-03-11  Matthias Clasen  <maclas@gmx.de>

        * gtkdoc-scangobj.in, gtkdoc-mkdb.in: Create docs for signals on interfaces.

2002-02-01  Damon Chaplin  <damon@ximian.com>

        * configure.in: check for openjade or jade. Patch from Stefan Kost
        <kost@imn.htwk-leipzig.de>.

        * gtkdoc-mkhtml.in: use @JADE@ so the correct version of jade is used.

        * autogen.sh: commented out autoheader since we don't have a config.h.

2002-01-18  Damon Chaplin  <damon@ximian.com>

        * Released 0.9.

2002-02-01  Damon Chaplin  <damon@ximian.com>

        * examples/Makefile.am: added SCANOBJ_OPTIONS in case the module needs
        to pass options to gtkdoc-scanobj or gtkdoc-scangobj.

2002-01-24  Damon Chaplin  <damon@ximian.com>

        * tools/gtk-doc.el: added Zucchi's emacs lisp for automatically adding
        skeleton comment blocks above functions. Very handy!

2002-01-23  Damon Chaplin  <damon@ximian.com>

        * configure.in: bumped the version to 0.9, so GTK+ can depend on this
        if it wants to.

        * gtkdoc-scangobj.in: we now default to calling g_type_init() to
        initialize the type system, rather than gtk_init(). This means you
        don't need an X connection to build the docs any more. Hurrah!
        Also added a '--type-init-func' argument so you can change the
        function to be called. GTK+ uses --type-init-func="gtk_type_init(0)".

        * gtkdoc-scan.in (ScanHeader): removed 'Found object' debug message.

2002-01-18  Damon Chaplin  <damon@ximian.com>

        * Released 0.8.

2002-01-18  Damon Chaplin  <damon@ximian.com>

        * Makefile.am (EXTRA_DIST): added gtk-doc.dcl to EXTRA_DIST.

2002-01-18  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-scangobj.in: Reverted jacob's patch for this release, since
        it breaks GTK+ and possibly other packages. I'll re-apply it after
        the release, so we can fix everything in CVS.

2002-01-18  jacob berkman  <jacob@ximian.com>

        * gtkdoc-scangobj.in: default to calling g_type_init(), remove
        --nogtkinit argument and replace with a more flexible
        --type-init-func

2002-01-18  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in (ScanSourceFile): patch from Matthias Clasen
        <matthiasc@poet.de> to only strip first space after '*' in source
        code comment blocks, so example code can be indented as desired.
        Bug #68216.

Wed Nov 21 16:50:35 2001  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mkdb,tmpl.in: Add some extra quoting to
        error messages to make it clearer what is going on
        with trailing commas on enumeration declarations.

Wed Nov 21 16:00:45 2001  Owen Taylor  <otaylor@redhat.com>

        * Applied patch from Matthias Clasen to use a modified
        .dcl file with the 44 character name length limit removed.
        (#61342)

2001-10-17  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in: applied patch from Matthias Clasen
        <matthiasc@poet.de> to take a --sgml-mode argument which means
        all comment blocks in the source code are assumed to be DocBook
        (i.e. we don't convert '<', '>' and '&' to '&lt;' etc.

2001-10-09  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in (OutputMissingDocumentation): changed %.2f to %.0f
        so hopefully the automated reports on developer.gnome.org will work
        OK again.

2001-10-02  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mktmpl.in (OutputDeclaration): 
        * gtkdoc-mkdb.in (OutputFunction): applied patch from
        matthiasc@poet.de (Matthias Clasen) to handle G_CONST_RETURN in a
        parameter list. Bug #61341.

2001-10-02  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in (OutputMissingDocumentation): applied patch from
        matthiasc@poet.de (Matthias Clasen) to output percentages better.
        Bug #61467.
        Also set percent to 100 if total is 0, avoiding divide-by-zero.

2001-10-02  Damon Chaplin  <damon@ximian.com>

        * examples/Makefile.am (DOC_OVERRIDES): define as an empty string,
        even when not used.

2001-09-13  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in (OutputMissingDocumentation): initialize buffer to "".
        Fix for SGI from David Kaelbling <drk@sgi.com>.

Sat Sep  8 14:08:51 2001  Jonathan Blandford  <jrb@webwynk.net>

        * gtkdoc-scan.in (ScanHeader): recognize GET_IFACE macros

2001-09-08  Havoc Pennington  <hp@pobox.com>

        * gtkdoc-mkdb.in (GetArgs): Title the section on object properties 
        "Properties" instead of "Args"

2001-08-14  Laszlo Peter  <laca@ireland.sun.com>

        * gtkdoc-scanobj.in:
        * gtkdoc-scangobj.in: change \n's to \\n's in perl scripts
        generating C code.

2001-08-12  Jens Finke <jens@gnome.org>
        
        * Updated gtk-doc.spec.in file to match gpp standard.

2001-08-04  Damon Chaplin  <damon@ximian.com>

        * Released 0.7

2001-08-04  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in (OutputFunction): 
        * gtkdoc-mktmpl.in (OutputDeclaration): patch from Lowell Johnson
        <ldjohn@usgs.gov> to accept things like "long long", "short int",
        "char test[][CLEN]" as function parameters.

2001-07-20  Anders Carlsson  <andersca@gnome.org>

        * gtkdoc-scangobj.in: Remove argument to g_type_init ();

2001-07-09  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in (ParseStructDeclaration): accept G_CONST_RETURN
        modifier for function return values. gtkdoc-mktmpl.in already had this.

Thu Jun 21 11:57:16 2001  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-scangobj.in: Conform to changes in GObject API
        for property retrieval.

2001-05-25  Peter Williams  <peterw@ximian.com>

        * gtkdoc-mkdb.in (ScanSourceFile): Skip single-line comments -- 
        prevents barfing on ORBit-generated files.

2001-05-20  Damon Chaplin  <damon@ximian.com>

        * examples/Makefile.am (sgml-build.stamp): replaced use of wildcard
        (which isn't portable) with original *.sgml. I think this just means
        that the first time you try to build the docs it will fail, but if
        you run make again it will work.

        * doc/setting-up.txt: explained that make may fail the first time.

2001-05-19  Damon Chaplin  <damon@ximian.com>

        * README: 
        * doc/README:
        * doc/setting-up.txt:
        * doc/sections-file.txt:
        * doc/authors.txt: updated docs to cover simpler setup procedure.

        * doc/gtk_button.txt:
        * doc/manpage:
        * doc/manpage.man:
        * doc/notes.txt: removed out-of date stuff.

        * Makefile.am (dist-hook): updated so it doesn't try to remove old
        examples subdirectory stuff.

2001-05-19  Damon Chaplin  <damon@ximian.com>

        * examples/gnome/*:
        * examples/gnomeui/*: removed out-of-date example files.

        * examples/configure.in:
        * examples/Makefile.am: new example setup mostly copied from GTK+.

        * examples/README: describe the example configure.in/Makefile.am.

2001-05-19  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in: added --help option and changed output slightly to
        make more compatable with XML. Patch from Toshio Kuratomi
        <badger@prtr-13.ucsc.edu>

2001-05-19  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mktmpl.in (OutputDeclaration): 
        * gtkdoc-mkdb.in (OutputFunction): changed a '?' to a '*' so we accept
        multi-dimensional array function parameters. Patch from Paolo Casarini
        <casarini@CS.UniBO.IT>

2001-05-12  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-scangobj.in: 
        * gtkdoc-scanobj.in: used "*pos = 0" to avoid problems with backslashes
        in '\0'.

        * configure.in: removed dsssl dirs stuff, since we use public entities
        now.

        * gtkdoc-mkdb.in (OutputBook): if there is no main SGML file we create
        it here. Also added a --main-sgml-file option so we know where to put
        it.

        * gtkdoc-scan.in: if there is no MODULE-sections.txt file, we copy
        the MODULE-decl-list.txt file to it. The user can tweak it later.

2001-05-11  Damon Chaplin  <damon@ximian.com>

        * gtk-doc.spec.in: applied patch from Toshio Kuratomi
        <badger@prtr-13.ucsc.edu>.

2001-05-07  Joakim Ziegler  <joakim@ximian.com>

  * gtkdoc-mkdb.in: Added option --outputallsymbols to create a symbol list
    in the module doc dir.

  * gtkdoc-mkdb.in: Added functionality to output a list of undocumented
    symbols in a module, most of is is in OutputMissingDocumentation.

  * gtkdoc-scan.in: Small scanning fixes to facilitate the doc coverage
     output mentioned above.

2001-04-25  Federico Mena Quintero  <federico@ximian.com>

        * gtkdoc-scanobj.in: Added missing output-dir in the call to
        GetOptions().

2001-04-24  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-scanobj.in: copied --outputdir option from gtkdoc-scangobj.in.

Fri Apr 13 15:25:44 2001  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mkdb.in: Restore call to OutputBook that was accidentally
        deleted.

Thu Apr 12 17:57:12 2001  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-scangobj.in: Add a --outputdir option (sort of hacky.
        Need this because $CC, $LD can include relative paths if they
        are based on $LIBTOOL)

2001-03-26  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mkdb.in (ReadSourceDocumentation): scan .h files as well,
        so macros can be documented there if desired. Patch from
        Yoann Vandoorselaere <yoann@mandrakesoft.com>

        * gtkdoc-mkhtml.in (gtkdocdir): use 'test -f' rather than 'test -e'
        which is GNU-specific.

Thu Mar  8 17:26:29 2001  Tim Janik  <timj@gtk.org>

        * gtkdoc-scangobj.in: fix signal param type handling.

Tue Mar  6 23:21:46 2001  Jonathan Blandford  <jrb@redhat.com>

        * gtkdoc-scanobj.in: Add gobject support.  Now works on files that
        don't link against GTK.

Sat Mar  3 17:43:42 2001  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-{scan,mktmpl,mkdb}.in: Add support for G_CONST_RETURN.
        (Right now, it will appear as G_CONST_RETURN in the output -
        I'm not sure that's right - perhaps it should be converted
        to const.)

2001-02-20  Michael Meeks  <michael@ximian.com>

        * gtkdoc-mktmpl.in: s/TRUE/1/

2001-02-19  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-mktmpl.in (UpdateTemplates): fixed bug handling the $changed
        flag.

2001-02-17  Damon Chaplin  <damon@ximian.com>

        * gtkdoc-scan.in (ScanHeaders): 
        (ScanHeader): patch from Johannes Stezenbach <js@convergence.de>
        so we don't use '\b' in the regexp to match files/dirs to ignore.
        '\b' can match '_' so we matched things we shouldn't have.

Mon Feb 12 12:50:57 2001  Owen Taylor  <otaylor@redhat.com>

        * configure.in: Up version.

Sun Feb 11 18:35:07 2001  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mktmpl.in: Add a timestamp file for the
        templates like sgml.stamp

        * gtkdoc-mktmpl.in (OutputUnusedTemplates): Write the
        symbols out in sorted order instead of hash table
        order to reduce conflicts.

Mon Feb  5 16:48:51 2001  Owen Taylor  <otaylor@redhat.com>

        * configure.in gtk-doc.dsl.in: Remove checks for DSSSL - use a
        public entity instead.

        * gtkdoc-scangobj.in: Fix to work with libtool better.

2001-01-30  Havoc Pennington  <hp@pobox.com>

        * gtkdoc-fixxref.in, gtkdoc-mkdb.in, gtkdoc-mktmpl.in,
        gtkdoc-scan.in, gtkdoc-scangobj.in, gtkdoc-scanobj.in:  
        Added -*- cperl -*- magic, and --deprecated-guards
        option.

2001-01-23  Damon Chaplin  <damon@helixcode.com>

        * gtkdoc-scangobj.in: 
        * gtkdoc-scanobj.in: 
        * gtkdoc-scan.in: 
        * gtkdoc-mkdb.in: 
        * gtkdoc-mktmpl.in: changed so that they only update files when
        necessary (they write new versions of the files out, then use 'cmp'
        to compare with the existing versions to see if they have changed.)
        This should make it easier to do proper dependency rules in Makefiles,
        and it may cut down on CVS traffic.

        * gtkdoc-mkhtml.in: update a timestamp file (html.stamp) after running.
        * gtkdoc-mkdb.in: update a timestamp file (sgml.stamp) if any of the
        DocBook SGML files have been changed. So hopefully you can now use
        rules like this to avoid unnecessary regeneration of the HTML:

        all-local:
                $(MAKE) scan
                $(MAKE) templates
                $(MAKE) sgml
                $(MAKE) html.stamp
        
        html.stamp: sgml.stamp $(EXTRA_SGML_FILES)
                $(MAKE) html

        (I've tried this with the old GTK+ reference API docs and it seems to
        work well.)

        * gtkdoc-scangobj.in: 
        * gtkdoc-scanobj.in: 
        * gtkdoc-scan.in: 
        * gtkdoc-mkdb.in: 
        * gtkdoc-mktmpl.in:
        * gtkdoc-mkhtml.in:
        * gtkdoc-mkman.in:
        * gtkdoc-fixxref.in:
        Added '--version' command-line arg to all shell & perl scripts, so
        you can check for version 0.5 if you want to use the above rules.
        (If 0.4 is used make will probably complain about not knowing how to
        to build sgml.stamp.)

        * gtkdoc-common.pl.in: new file to contain shared routines.
        For now it just contains the UpdateFileIfChanged routine for the above.
        We can move the duplicated routines here in future, though the use of
        global variables makes this a bit awkward.

        * configure.in (PACKAGE_DATA_DIR): calculates the data dir and
        substitutes it so that the scripts know where gtkdoc-common.pl
        is installed. Also added gtkdoc-common.pl to AC_OUTPUT.

        * Makefile.am: added gtkdoc-common.pl to gtkdocdata_DATA.

        * gtkdoc-mkhtml.in: deleted the old index.sgml file, since it causes
        problems if it is owned by root (e.g. after you run 'make install' as
        root. jade prompts you about overwriting it, which is annoying.

2001-01-10  Havoc Pennington  <hp@redhat.com>

        * gtkdoc-mktmpl.in: Only move old file to backup if the old file
        exists, and have better error messages when doing the backups

Mon Jan  8 14:57:29 2001  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mktmpl.in: Canonicalize signal and argument
        names to -, not _.

        * gtkdoc-scangobj.in: Fix up for GParamSpec.

2001-01-04  Frédéric Gobry  <frederic.gobry@smartdata.ch>

        * gtkdoc-scan.in: fixed matching of < private_header > directive

2000-12-19  Damon Chaplin  <damon@helixcode.com>

        * gtkdoc-scanobj.in: 
        * gtkdoc-scangobj.in: added default cases to get_type_name().

2000-12-10  Arturo Tena  <arturo@directmail.org>

        * gtkdoc-scanobj.in (get_type_name): 
        * gtkdoc-scangobj.in (get_type_name): fixed syntax error: forgotten
        to close a switch statement.

2000-12-10  Damon Chaplin  <damon@helixcode.com>

        * gtk-doc.spec.in: added spec.in file from John Gotts
        <jgotts@linuxsavvy.com>.

        * configure.in (AC_OUTPUT): added spec file.

        * Makefile.am: uncommented spec file stuff, now that we have one.

        * gtkdoc-scanobj.in (get_type_name): 
        * gtkdoc-scangobj.in (get_type_name): updated to use the type numbers
        rather than the type names, which were changed in GTK+ 1.2. This
        should fix a problem where GTK_TYPE_STRING arguments were output as
        'GtkString *arg' instead of 'gchar *arg'.

        I'm still not sure what to output for the structured types such as
        GTK_TYPE_SIGNAL/ARGS/FOREIGN/CALLBACK/C_CALLBACK. Should these be
        expanded to several arguments to the signal handler?

2000-11-25  Dan Mueth <d-mueth@uchicago.edu>

        * help/manual/C/: created this path
    * gtk-doc-manual.sgml: Put part of the outline into SGML.
      Chris plans to put rest of outline in here and start
      writing.
    * fdl-appendix.sgml: The FDL in SGML.  We will probably post
      these on the web as a single document (book) so we will
      need the FDL to be included as an appendix.

Fri Nov  3 07:21:34 2000  Tim Janik  <timj@gtk.org>

        * gtkdoc-mkdb.in:
        (ParseStructDeclaration):
        (OutputStruct):
        * gtkdoc-mktmpl.in:
        (ParseStructDeclaration):
        support /*<protected>*/ equivalently to /*<private>*/

Fri Nov  3 07:15:58 2000  Tim Janik  <timj@gtk.org>

        * gtkdoc-mktmpl.in: 
        * gtkdoc-mkdb.in:
        (ReadTemplateFile): only eat up the first space (if at all
        present) after "@param:" to preserve indentation for multiline
        parameter descriptions.

2000-10-30  Raja R Harinath  <harinath@cs.umn.edu>

        * gtkdoc-mkdb.in (ParseStructDeclaration):
        Stop scanning at '}' only when it starts a line.
        * gtkdoc-mktmpl.in (ParseStructDeclaration): Likewise.
        
Mon Oct 30 02:59:54 2000  Tim Janik  <timj@gtk.org>

        * gtkdoc-scangobj.in: use g_signal_list_ids().

Sun Oct 29 02:54:51 2000  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-scangobj.in: Sort signal types arrays for
        greater stability and less random tmpl file diffs.

Sun Oct 29 01:02:35 2000  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-scangobj.in: Work properly with GSignal

2000-10-21  Damon Chaplin  <damon@helixcode.com>

        * Released 0.4

2000-10-14  Damon Chaplin  <damon@helixcode.com>

        * AUTHORS: 
        * MAINTAINERS: changed my email address.

        * Makefile.am (dist-hook): remove the CVS dirs from the dist.

        * doc/setting-up.txt: typo.

Fri Oct  6 17:51:50 2000    <otaylor@redhat.com>

        * gtkdoc-scan.in gtkdoc-mkdb.in: Allow multiple
        --source-dir options.

Thu Sep  7 11:41:12 2000  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mkdb.in: Ignore all . files when scanning directories.

        * gtkdoc-scan.in: Add support for GLIB_VAR, GDKVAR,
        etc when looking for variable declarations. 

        * gtkdoc-scan.in: Recognize GET_CLASS macros.

        * gtkdoc-scangobj.in: Support .lo intermediate files
        with libtool.

Wed Sep  6 17:57:33 2000  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-scangobj.in: Add gtkdoc-scangobj scanner for
        GObject type system.

        * gtkdoc-scanobj.in: Allow setting $LD to allow separating
        compilation and linking and thus to allow using libtool.

        * gtkdoc-fixxref.in (ScanIndices): Allow HTMLDIR
        not to be present yet.

Tue Sep  5 23:37:53 2000  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-fixxref.in: Add a --extra-dir option to
        allow scanning of additional uninstalled HTML
        directories.

        * gtkdoc-scan.in (ScanHeaders): Honor subdirectories
        appearing in --ignore-headers.

        * gtkdoc-mkdb.in: Append -CAPS to all all-caps identifiers
        to prevent an infinite expansion of special cases. 

        * gtkdoc-fixxref.in: Add a --module-dir option to
        allow fixing references in an uninstalled tree.

        * gtkdoc-mkdb.in gtkdoc-mkhtml.in: Simple handling
        for macros with embedded commas in enumeration 
        declarations.

Mon Aug 28 18:18:53 2000  Owen Taylor  <otaylor@redhat.com>

        * configure.in (DSSSL_DIR): Remove check for AM_PATH_GTK
        since the dependency is only run-time not install-time,
        and to avoid dependency loops.

2000-06-21  Damon Chaplin  <damon@helixcode.com>

        * gtkdoc-mkdb.in: fixed <INCLUDES> bug, I think.

Wed Feb  9 11:29:25 2000  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-scan.in: Hack to avoid misidentifying structures
        as GtkObjects within Pango.

1999-12-15  Raja R Harinath  <harinath@cs.umn.edu>

        * gtk-doc.dsl.in ($generate-chapter-toc$): Add missing close
        paranthesis. 

1999-11-23  Raja R Harinath  <harinath@cs.umn.edu>

        * gtk-doc.dsl.in: Use the (define (foo) ...) syntax rather than
        the uglier (define foo (lambda () ...)) syntax.
        ($generate-chapter-toc$): Simplify.
        ($shade-verbatim-attr$): Simplify.  Use ($table-width$) instead of
        "100%" for width (See docs. of NWalsh Docbook DSSSL Stylesheets
        for an explanation).

1999-09-20  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtk-doc.dsl.in: If a Chapter has role="no-toc" we don't generate a
        table of contents. This is useful if a better contents page has been
        added manually, e.g. for the GTK+ Widgets & Objects page. (But it is
        a bit of a hack.)

        * gtkdoc-scanobj.in: added --nogtkinit flag which will make it call
        gtk_type_init() rather than gtk_init(). This is useful when it is
        run automatically to update the docs by a cron job or similar and a
        connection to an X server is not desirable. However, if any widgets
        need a connection to X in their class init function then this can't
        be used (e.g. GtkFontSelection at present).

Mon Sep 20 09:09:12 1999  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mkdb.in gtkdoc-mktmpl.in: (ParseStructDeclaration): 
        Fixed up the code to do /*< private >*/ ... stripping.

1999-09-10  Martin Baulig  <martin@home-of-linux.org>

        * gtkdoc.dsl.in ($generate-chapter-toc$): Return #t, not #f.

1999-09-09  Martin Baulig  <martin@home-of-linux.org>

        * gtkdoc-scan.in (ScanHeader): Don't force typedefs and other
        things to start in column 0; allow some spaces in front of them.
        Output `typedef struct { ... } name' structs as typedef, not as
        structure.

1999-09-08  Martin Baulig  <martin@home-of-linux.org>

        * gtkdoc-mkdb.in (CreateValidSGMLID): `s/::/-/g;' for CORBA objects.

1999-08-22  Erik Walthinsen  <omega@cse.ogi.edu>

        * gtkdoc-scan.in: modified so it will find any Class, not just Gtk
        and Gnome classes.  Introduces the possibility of extraneous Class
        definitions (verified), which should be pruned somehow (haven't
        analyzed the false positive yet).

1999-08-22  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtkdoc-mktmpl.in: 
        * gtkdoc-mkdb.in: a few fixes to ParseStructDeclaration. It still
        has problems with nested structs/unions like those which occur in
        gtkclist.h and gtktypeutils.h.

        * configure.in: removed gtk-doc.spec from AC_OUTPUT, as whoever wrote
        this forgot to add gtk-doc.spec.in to CVS.
        * Makefile.am: commented out gtk-doc.spec.

Wed Aug 18 03:55:30 1999  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mktmpl.in: Propagate fix from gtkdoc-mkdb.in.
        :-(; need to libraryize, need to libraryize.

Wed Aug 18 03:55:30 1999  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mkdb.in: Fix bug that was preventing
        structure field definitions from being output.

Wed Aug 18 23:25:23 1999  Owen Taylor  <otaylor@redhat.com>

        * configure.in: Add /usr/lib/sgml/stylesheet to list
        of stylesheet directories. (Found in recent Debian
        packages)

1999-08-15  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtkdoc-mkdb.in: Output $decl_out as the struct rather than the
        original $declaration.

1999-08-12  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtkdoc-mkdb.in: 
        * gtkdoc-mktmpl.in: Added special case in ParseEnumDeclaration to
        handle GIOCondition which uses strange macros like this:
        typedef enum
        {
          G_IO_IN       GLIB_SYSDEF_POLLIN,
          ...
        The GLIB_SYSDEF_POLLIN macro expands to something like '=1'

1999-08-05  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtk-doc.dsl.in: output <br clear=all> after sections and at end of
        page so that right-aligned images aren't messed up quite as much.

Wed Aug  4 04:04:55 1999  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mk{db,tmpl}.in (ParseStructDeclaration): Allow
        for bit fields.

        * gtkdoc-mktmpl.in (ReadObjectHierarchy): Remove
        call to MakeXref that slipped in accidentally.

Wed Aug  4 03:30:19 1999  Owen Taylor  <otaylor@redhat.com>

        * doc/style-guide.txt: Removed references to creating
        tables explicitely in favor of demonstrating new
        syntax. Added a short section on /<* public >*/
        and /*< private *>/.

Wed Aug  4 03:15:19 1999  Owen Taylor  <otaylor@redhat.com>

        * gtkdoc-mktmpl.in gtkdoc-mkhtml.in: Handle Struct and
        Enumerations in approximately the same way as we
        handle parameters. That is, instead of (as before)
        coding in the tables by hand, one uses lines like:

        @width: the width of the rectangle in pixels.

        To support migration from the older hand-coded
        tables, if none of the members of a structure or
        enumeration have a description in a @... line, then
        we don't generate the table at all.

        Also, gtkdoc-mktmpl now loads up the object heirarchy,
        because we need to be able to check if structures
        are widget structures.

        In general, the coding here is pretty clean, though
        the style is a little different. (I'm interating
        through strings with m/.../msg; instead of 
        s/^...//; for one thing.) However, there are a some
        of FIXME's where I've whimped out on try to handle
        real C syntax, and the need to split out and librarize
        a bunch of duplicated code is greater than ever.

1999-06-06  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * configure.in: updated version to 0.3.

        * doc/style-guide.txt: A couple of minor changes.

        * gtkdoc-mkdb.in: Get rid of a couple of messages.
        Output an empty <para> if an Arg isn't documented, to keep Jade happy.

1999-05-22  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtk-doc.dsl.in: Renamed %shade-verbatim-attr-2% to
        $shade-verbatim-attr$ and removed our redefinition of
        $verbatim-display$ since the stylesheets version now calls
        $shade-verbatim-attr$ as a function which is just what we wanted.

        * README: Updated info on stylesheet versions supported - 1.40 is
        known to be OK (with this version of gtk-doc), 1.19+ may work.

1999-03-31  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * configure.in: update version to 0.2 for next release.

        * gtkdoc-mktmpl.in: 
        * gtkdoc-mkdb.in: added support for 'See Also' section.

        * gtk-doc.dsl.in: changed green background color slightly, and
        set background color for enum tables.

1999-03-21  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtkdoc-mkhtml.in (gtkdocdir): use '-w no-idref' to suppress all the
        warnings about references to non-existent IDs.

1999-03-18  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtkdoc-mkdb.in (OutputParamDescriptions): use role="params" for the
        table so we can adjust the stylesheet code.
        (OutputSGMLFile): Don't output 'one line description goes here'.
        (ExpandAbbreviations): allow '-' in #symbol abbreviations, so we can
        use #GtkWidget-struct.
        (MakeXRef): get rid of special '-struct' suffix, for #GtkWidget-struct.

        * gtk-doc.dsl.in: use the "role" attribute on tables to set the
        BGCOLOR.

        * gtkdoc-scan.in (ScanHeader): fix for scanning functions declared
        over multiple lines - was catching things which weren't functions.

1999-03-11  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * examples/gnomeui/Makefile.am (clean-local): 
        * examples/gnome/Makefile.am (clean-local): added *.args

        * gtkdoc-mkdb.in: added support for Args and variables. Also a few
        minor changes in the output, e.g. don't show macros > 2 lines long.

        * gtkdoc-mktmpl.in: 
        * gtkdoc-scanobj.in: added support for Args.

        * gtkdoc-scan.in: added support for extern'ed variables. Also
        accept 'extern' before function declarations.

        * gtk-doc.dsl.in: made output prettier. Changed the navigation bars
        and the colours used for the various backgrounds.

        * doc/style-guide.txt: new file containinf a style guide for writing
        the GTK+ documentation.

        * doc/README: added description of style-guide.txt

        * doc/setting-up.txt: fixed a typo

        * README: added a bit about Args.

1999-02-07  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * Makefile.am: Removed all the scripts from EXTRA_DIST, as they are
        now generated from the .in files which automatically go in the dist.

1999-02-02  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * doc/setting-up.txt (scan): removed text which incorrectly said that
        changing section titles means you have to recreate the main SGML file.

1999-02-03  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
        
        * configure.in: find perl in $PATH, generate the perl programs
        from their *.in counterparts.
        
        * gtkdoc-fixxref, gtkdoc-mkdb, gtkdoc-mktmpl, gtkdoc-scan,
        gtkdoc-scanobj: Renamed to *.in and changed /usr/bin/perl to
        @PERL@, as determined by configure.
        
        * .cvsignore: Added diverse config* stuff and the new generated
        perl programs.

1999-01-28  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtk-doc.dsl.in: I forgot to make the new refentry code process the
        child elements, so it was only outputting anchors for each page.

        * doc/setting-up.txt (scan): added step to create MODULE.types file
        for modules which contain widgets (or objects).

        * gtkdoc-mkdb (OutputStruct): allow spaces inside the public/private
        markers, e.g. "/*  <  public  >  */"

1999-01-27  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * Makefile.am: added scripts to EXTRA_DIST and copied examples, doc
        and db2man dirs in dist-hook.

        * doc/sections-file.txt: added a couple of examples.

        * doc/setting-up.txt: new document describing how to set up a module
        to use gtk-doc.

        * doc/README: added description of setting-up.txt

        * README: added short 'Installation' section describing the
        --with-dsssl-dir option.

        * gtk-doc.dsl.in: also output links to each RefEntry page in the
        index.sgml file, so libgnomeui docs can link to widgets. (The widget
        hierarchy links were not working before.)

1999-01-26  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtkdoc-scan (ScanHeader): parse function declarations that have the
        return type and name on one line, and the '(' and args on the next.
        NOTE: functions with the start of the declaration split over 3 lines
        will not be parsed (e.g. return type on one line, function name on
        next, and '(' and first argument on the third.) I hope there aren't
        any.

        * gtkdoc-mkdb (OutputStruct): Use a different SGML ID for widget
        structs, since the original ID is used for the entire RefEntry.
        Also only show parts of widget structs which are marked with a
        comment '/*<public>*/'. Use '/*<private>*/' for private fields.

        * gtkdoc-mktmpl (UpdateTemplates): We include widget structs now,
        so we do want warnings if they aren't used.

        * examples/gnomeui/gnomeui-docs.sgml: 
        * examples/gnomeui/gnomeui-sections.txt:
        * examples/gnomeui/gnomeui.types:
        * examples/gnome/gnome-docs.sgml: 
        * examples/gnome/gnome-sections.txt: sync with latest source.

        * examples/configure.in: Add --with-gnome-libs-dir option, so it can
        be configured easily.
        * examples/gnomeui/Makefile.am (DOC_SOURCE_DIR): 
        * examples/gnome/Makefile.am (DOC_SOURCE_DIR): use the new
        GNOME_LIBS_DIR.

        * gtkdoc-mkdb (MergeSourceDocumentation): accept parameters names in
        the source which use the wrong case, since there are quite a few of
        these in Gnome.

1999-01-25  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * gtkdoc-mktmpl: parse G_GNUC_EXTENSION before typedef'ed types.

        * gtkdoc-mkdb: added support for specifying include files in the
        MODULE-sections.txt file, to be output at the top of the synopsis.

        * doc/sections-file.txt: added description of <INCLUDE> tag.

        * examples/gnomeui/gnomeui-sections.txt: 
        * examples/gnome/gnome-sections.txt: added use of <INCLUDE>

        * examples/configure.in: changed 'gtk-reference' to
        'gnome-libs-reference'.

1999-01-18  Damon Chaplin  <damon@karuna.freeserve.co.uk>

        * README: updated my email address & noted that version 1.15+ of the
        DocBook modular stylesheets is needed (for $table-width$).

        * AUTHORS: updated my email address.

1998-12-20  Jeff Garzik  <jgarzik@pobox.com>

        * examples/gnomeui/gnomeui-docs.sgml,
          examples/gnomeui/gnomeui-sections.txt,
          examples/gnomeui/gnomeui.types:
        s/gtkspell/gnome-spell/g

1998-12-16  Damon Chaplin  <DAChaplin@msn.com>

        * gtkdoc-mkdb (ExpandAbbreviations): Allow -ve contants, e.g. %-1.
        (ScanSourceFile): Try to handle function descriptions that start
        with 'Returns'. It was assuming that they were describing the return
        value before.
        Gets rid of 'Description:' which is sometimes included
        at the start of the function description in the source comment blocks.
        Makes sure newlines are preserved in the description, as consecutive
        newlines are converted to paragraph separators later.

1998-12-15  Damon Chaplin  <DAChaplin@msn.com>
        * Major changes to the scripts to merge in comments within source code
        * gtk-doc-fixxref added
        * examples directory added with an example for setting up modules to
        use gtk-doc
        * documentation updated
        

1998-11-28  Damon Chaplin  <DAChaplin@msn.com>

        * gtkdoc-scanobj: 
        * gtkdoc-scan: 
        * gtkdoc-mktmpl: 
        * gtkdoc-mkdb: Major changes to make it easy to update the docs
        when the API changes. It's pretty much all automatic now.
        Also added licenses and function comments, and added 'use strict'.
        The Gnome widgets should now be visible in the hierarchy.
        Removed a few 'mkdir's which I don't think are necessary now.
        
Tue Nov 24 16:32:23 1998  Owen Taylor  <otaylor@redhat.com>

        * README doc/authors.txt: Updated to describe the
        new generic scripts instead of the old ones hard-coded
        for GLIB and GTK+.

Tue Nov 24 01:06:17 1998  Owen Taylor  <otaylor@redhat.com>

        * .cvsignore: Added .cvsignore

Tue Nov 24 01:03:47 1998  Owen Taylor  <otaylor@redhat.com>

        * autogen.sh configure.in: Minor touchups so the newly
        imported stuff autogen's correctly.