source: trunk/third/libart_lgpl/art_svp_vpath_stroke.c @ 20813

/* Libart_LGPL - library of basic graphic primitives
 * Copyright (C) 1998-2000 Raph Levien
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Library General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Library General Public License for more details.
 *
 * You should have received a copy of the GNU Library General Public
 * License along with this library; if not, write to the
 * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 * Boston, MA 02111-1307, USA.
 */


#include "config.h"
#include "art_svp_vpath_stroke.h"

#include <stdlib.h>
#include <math.h>

#include "art_misc.h"

#include "art_vpath.h"
#include "art_svp.h"
#ifdef ART_USE_NEW_INTERSECTOR
#include "art_svp_intersect.h"
#else
#include "art_svp_wind.h"
#endif
#include "art_svp_vpath.h"

#define EPSILON 1e-6
#define EPSILON_2 1e-12

#define yes_OPTIMIZE_INNER

/* Render an arc segment starting at (xc + x0, yc + y0) to (xc + x1,
   yc + y1), centered at (xc, yc), and with given radius. Both x0^2 +
   y0^2 and x1^2 + y1^2 should be equal to radius^2.

   A positive value of radius means curve to the left, negative means
   curve to the right.
*/
static void
art_svp_vpath_stroke_arc (ArtVpath **p_vpath, int *pn, int *pn_max,
                          double xc, double yc,
                          double x0, double y0,
                          double x1, double y1,
                          double radius,
                          double flatness)
{
  double theta;
  double th_0, th_1;
  int n_pts;
  int i;
  double aradius;

  aradius = fabs (radius);
  theta = 2 * M_SQRT2 * sqrt (flatness / aradius);
  th_0 = atan2 (y0, x0);
  th_1 = atan2 (y1, x1);
  if (radius > 0)
    {
      /* curve to the left */
      if (th_0 < th_1) th_0 += M_PI * 2;
      n_pts = ceil ((th_0 - th_1) / theta);
    }
  else
    {
      /* curve to the right */
      if (th_1 < th_0) th_1 += M_PI * 2;
      n_pts = ceil ((th_1 - th_0) / theta);
    }
#ifdef VERBOSE
  printf ("start %f %f; th_0 = %f, th_1 = %f, r = %f, theta = %f\n", x0, y0, th_0, th_1, radius, theta);
#endif
  art_vpath_add_point (p_vpath, pn, pn_max,
                       ART_LINETO, xc + x0, yc + y0);
  for (i = 1; i < n_pts; i++)
    {
      theta = th_0 + (th_1 - th_0) * i / n_pts;
      art_vpath_add_point (p_vpath, pn, pn_max,
                           ART_LINETO, xc + cos (theta) * aradius,
                           yc + sin (theta) * aradius);
#ifdef VERBOSE
      printf ("mid %f %f\n", cos (theta) * radius, sin (theta) * radius);
#endif
    }
  art_vpath_add_point (p_vpath, pn, pn_max,
                       ART_LINETO, xc + x1, yc + y1);
#ifdef VERBOSE
  printf ("end %f %f\n", x1, y1);
#endif
}

/* Assume that forw and rev are at point i0. Bring them to i1,
   joining with the vector i1 - i2.

   This used to be true, but isn't now that the stroke_raw code is
   filtering out (near)zero length vectors: {It so happens that all
   invocations of this function maintain the precondition i1 = i0 + 1,
   so we could decrease the number of arguments by one. We haven't
   done that here, though.}

   forw is to the line's right and rev is to its left.

   Precondition: no zero-length vectors, otherwise a divide by
   zero will happen.  */
static void
render_seg (ArtVpath **p_forw, int *pn_forw, int *pn_forw_max,
            ArtVpath **p_rev, int *pn_rev, int *pn_rev_max,
            ArtVpath *vpath, int i0, int i1, int i2,
            ArtPathStrokeJoinType join,
            double line_width, double miter_limit, double flatness)
{
  double dx0, dy0;
  double dx1, dy1;
  double dlx0, dly0;
  double dlx1, dly1;
  double dmx, dmy;
  double dmr2;
  double scale;
  double cross;

#ifdef VERBOSE
  printf ("join style = %d\n", join);
#endif

  /* The vectors of the lines from i0 to i1 and i1 to i2. */
  dx0 = vpath[i1].x - vpath[i0].x;
  dy0 = vpath[i1].y - vpath[i0].y;

  dx1 = vpath[i2].x - vpath[i1].x;
  dy1 = vpath[i2].y - vpath[i1].y;

  /* Set dl[xy]0 to the vector from i0 to i1, rotated counterclockwise
     90 degrees, and scaled to the length of line_width. */
  scale = line_width / sqrt (dx0 * dx0 + dy0 * dy0);
  dlx0 = dy0 * scale;
  dly0 = -dx0 * scale;

  /* Set dl[xy]1 to the vector from i1 to i2, rotated counterclockwise
     90 degrees, and scaled to the length of line_width. */
  scale = line_width / sqrt (dx1 * dx1 + dy1 * dy1);
  dlx1 = dy1 * scale;
  dly1 = -dx1 * scale;

#ifdef VERBOSE
  printf ("%% render_seg: (%g, %g) - (%g, %g) - (%g, %g)\n",
          vpath[i0].x, vpath[i0].y,
          vpath[i1].x, vpath[i1].y,
          vpath[i2].x, vpath[i2].y);

  printf ("%% render_seg: d[xy]0 = (%g, %g), dl[xy]0 = (%g, %g)\n",
          dx0, dy0, dlx0, dly0);

  printf ("%% render_seg: d[xy]1 = (%g, %g), dl[xy]1 = (%g, %g)\n",
          dx1, dy1, dlx1, dly1);
#endif

  /* now, forw's last point is expected to be colinear along d[xy]0
     to point i0 - dl[xy]0, and rev with i0 + dl[xy]0. */

  /* positive for positive area (i.e. left turn) */
  cross = dx1 * dy0 - dx0 * dy1;

  dmx = (dlx0 + dlx1) * 0.5;
  dmy = (dly0 + dly1) * 0.5;
  dmr2 = dmx * dmx + dmy * dmy;

  if (join == ART_PATH_STROKE_JOIN_MITER &&
      dmr2 * miter_limit * miter_limit < line_width * line_width)
    join = ART_PATH_STROKE_JOIN_BEVEL;

  /* the case when dmr2 is zero or very small bothers me
     (i.e. near a 180 degree angle)
     ALEX: So, we avoid the optimization when dmr2 is very small. This should
     be safe since dmx/y is only used in optimization and in MITER case, and MITER
     should be converted to BEVEL when dmr2 is very small. */
  if (dmr2 > EPSILON_2)
    {
      scale = line_width * line_width / dmr2;
      dmx *= scale;
      dmy *= scale;
    }

  if (cross * cross < EPSILON_2 && dx0 * dx1 + dy0 * dy1 >= 0)
    {
      /* going straight */
#ifdef VERBOSE
      printf ("%% render_seg: straight\n");
#endif
      art_vpath_add_point (p_forw, pn_forw, pn_forw_max,
                       ART_LINETO, vpath[i1].x - dlx0, vpath[i1].y - dly0);
      art_vpath_add_point (p_rev, pn_rev, pn_rev_max,
                       ART_LINETO, vpath[i1].x + dlx0, vpath[i1].y + dly0);
    }
  else if (cross > 0)
    {
      /* left turn, forw is outside and rev is inside */

#ifdef VERBOSE
      printf ("%% render_seg: left\n");
#endif
      if (
#ifdef NO_OPTIMIZE_INNER
          0 &&
#endif
          (dmr2 > EPSILON_2) &&
          /* check that i1 + dm[xy] is inside i0-i1 rectangle */
          (dx0 + dmx) * dx0 + (dy0 + dmy) * dy0 > 0 &&
          /* and that i1 + dm[xy] is inside i1-i2 rectangle */
          ((dx1 - dmx) * dx1 + (dy1 - dmy) * dy1 > 0)
#ifdef PEDANTIC_INNER
          &&
          /* check that i1 + dl[xy]1 is inside i0-i1 rectangle */
          (dx0 + dlx1) * dx0 + (dy0 + dly1) * dy0 > 0 &&
          /* and that i1 + dl[xy]0 is inside i1-i2 rectangle */
          ((dx1 - dlx0) * dx1 + (dy1 - dly0) * dy1 > 0)
#endif
          )
        {
          /* can safely add single intersection point */
          art_vpath_add_point (p_rev, pn_rev, pn_rev_max,
                           ART_LINETO, vpath[i1].x + dmx, vpath[i1].y + dmy);
        }
      else
        {
          /* need to loop-de-loop the inside */
          art_vpath_add_point (p_rev, pn_rev, pn_rev_max,
                           ART_LINETO, vpath[i1].x + dlx0, vpath[i1].y + dly0);
          art_vpath_add_point (p_rev, pn_rev, pn_rev_max,
                           ART_LINETO, vpath[i1].x, vpath[i1].y);
          art_vpath_add_point (p_rev, pn_rev, pn_rev_max,
                           ART_LINETO, vpath[i1].x + dlx1, vpath[i1].y + dly1);
        }

      if (join == ART_PATH_STROKE_JOIN_BEVEL)
        {
          /* bevel */
          art_vpath_add_point (p_forw, pn_forw, pn_forw_max,
                           ART_LINETO, vpath[i1].x - dlx0, vpath[i1].y - dly0);
          art_vpath_add_point (p_forw, pn_forw, pn_forw_max,
                           ART_LINETO, vpath[i1].x - dlx1, vpath[i1].y - dly1);
        }
      else if (join == ART_PATH_STROKE_JOIN_MITER)
        {
          art_vpath_add_point (p_forw, pn_forw, pn_forw_max,
                           ART_LINETO, vpath[i1].x - dmx, vpath[i1].y - dmy);
        }
      else if (join == ART_PATH_STROKE_JOIN_ROUND)
        art_svp_vpath_stroke_arc (p_forw, pn_forw, pn_forw_max,
                                  vpath[i1].x, vpath[i1].y,
                                  -dlx0, -dly0,
                                  -dlx1, -dly1,
                                  line_width,
                                  flatness);
    }
  else
    {
      /* right turn, rev is outside and forw is inside */
#ifdef VERBOSE
      printf ("%% render_seg: right\n");
#endif

      if (
#ifdef NO_OPTIMIZE_INNER
          0 &&
#endif
          (dmr2 > EPSILON_2) &&
          /* check that i1 - dm[xy] is inside i0-i1 rectangle */
          (dx0 - dmx) * dx0 + (dy0 - dmy) * dy0 > 0 &&
          /* and that i1 - dm[xy] is inside i1-i2 rectangle */
          ((dx1 + dmx) * dx1 + (dy1 + dmy) * dy1 > 0)
#ifdef PEDANTIC_INNER
          &&
          /* check that i1 - dl[xy]1 is inside i0-i1 rectangle */
          (dx0 - dlx1) * dx0 + (dy0 - dly1) * dy0 > 0 &&
          /* and that i1 - dl[xy]0 is inside i1-i2 rectangle */
          ((dx1 + dlx0) * dx1 + (dy1 + dly0) * dy1 > 0)
#endif
          )
        {
          /* can safely add single intersection point */
          art_vpath_add_point (p_forw, pn_forw, pn_forw_max,
                           ART_LINETO, vpath[i1].x - dmx, vpath[i1].y - dmy);
        }
      else
        {
          /* need to loop-de-loop the inside */
          art_vpath_add_point (p_forw, pn_forw, pn_forw_max,
                           ART_LINETO, vpath[i1].x - dlx0, vpath[i1].y - dly0);
          art_vpath_add_point (p_forw, pn_forw, pn_forw_max,
                           ART_LINETO, vpath[i1].x, vpath[i1].y);
          art_vpath_add_point (p_forw, pn_forw, pn_forw_max,
                           ART_LINETO, vpath[i1].x - dlx1, vpath[i1].y - dly1);
        }

      if (join == ART_PATH_STROKE_JOIN_BEVEL)
        {
          /* bevel */
          art_vpath_add_point (p_rev, pn_rev, pn_rev_max,
                           ART_LINETO, vpath[i1].x + dlx0, vpath[i1].y + dly0);
          art_vpath_add_point (p_rev, pn_rev, pn_rev_max,
                           ART_LINETO, vpath[i1].x + dlx1, vpath[i1].y + dly1);
        }
      else if (join == ART_PATH_STROKE_JOIN_MITER)
        {
          art_vpath_add_point (p_rev, pn_rev, pn_rev_max,
                           ART_LINETO, vpath[i1].x + dmx, vpath[i1].y + dmy);
        }
      else if (join == ART_PATH_STROKE_JOIN_ROUND)
        art_svp_vpath_stroke_arc (p_rev, pn_rev, pn_rev_max,
                                  vpath[i1].x, vpath[i1].y,
                                  dlx0, dly0,
                                  dlx1, dly1,
                                  -line_width,
                                  flatness);

    }
}

/* caps i1, under the assumption of a vector from i0 */
static void
render_cap (ArtVpath **p_result, int *pn_result, int *pn_result_max,
            ArtVpath *vpath, int i0, int i1,
            ArtPathStrokeCapType cap, double line_width, double flatness)
{
  double dx0, dy0;
  double dlx0, dly0;
  double scale;
  int n_pts;
  int i;

  dx0 = vpath[i1].x - vpath[i0].x;
  dy0 = vpath[i1].y - vpath[i0].y;

  /* Set dl[xy]0 to the vector from i0 to i1, rotated counterclockwise
     90 degrees, and scaled to the length of line_width. */
  scale = line_width / sqrt (dx0 * dx0 + dy0 * dy0);
  dlx0 = dy0 * scale;
  dly0 = -dx0 * scale;

#ifdef VERBOSE
  printf ("cap style = %d\n", cap);
#endif

  switch (cap)
    {
    case ART_PATH_STROKE_CAP_BUTT:
      art_vpath_add_point (p_result, pn_result, pn_result_max,
                           ART_LINETO, vpath[i1].x - dlx0, vpath[i1].y - dly0);
      art_vpath_add_point (p_result, pn_result, pn_result_max,
                           ART_LINETO, vpath[i1].x + dlx0, vpath[i1].y + dly0);
      break;
    case ART_PATH_STROKE_CAP_ROUND:
      n_pts = ceil (M_PI / (2.0 * M_SQRT2 * sqrt (flatness / line_width)));
      art_vpath_add_point (p_result, pn_result, pn_result_max,
                           ART_LINETO, vpath[i1].x - dlx0, vpath[i1].y - dly0);
      for (i = 1; i < n_pts; i++)
        {
          double theta, c_th, s_th;

          theta = M_PI * i / n_pts;
          c_th = cos (theta);
          s_th = sin (theta);
          art_vpath_add_point (p_result, pn_result, pn_result_max,
                               ART_LINETO,
                               vpath[i1].x - dlx0 * c_th - dly0 * s_th,
                               vpath[i1].y - dly0 * c_th + dlx0 * s_th);
        }
      art_vpath_add_point (p_result, pn_result, pn_result_max,
                           ART_LINETO, vpath[i1].x + dlx0, vpath[i1].y + dly0);
      break;
    case ART_PATH_STROKE_CAP_SQUARE:
      art_vpath_add_point (p_result, pn_result, pn_result_max,
                           ART_LINETO,
                           vpath[i1].x - dlx0 - dly0,
                           vpath[i1].y - dly0 + dlx0);
      art_vpath_add_point (p_result, pn_result, pn_result_max,
                           ART_LINETO,
                           vpath[i1].x + dlx0 - dly0,
                           vpath[i1].y + dly0 + dlx0);
      break;
    }
}

/**
 * art_svp_from_vpath_raw: Stroke a vector path, raw version
 * @vpath: #ArtVPath to stroke.
 * @join: Join style.
 * @cap: Cap style.
 * @line_width: Width of stroke.
 * @miter_limit: Miter limit.
 * @flatness: Flatness.
 *
 * Exactly the same as art_svp_vpath_stroke(), except that the resulting
 * stroke outline may self-intersect and have regions of winding number
 * greater than 1.
 *
 * Return value: Resulting raw stroked outline in svp format.
 **/
ArtVpath *
art_svp_vpath_stroke_raw (ArtVpath *vpath,
                          ArtPathStrokeJoinType join,
                          ArtPathStrokeCapType cap,
                          double line_width,
                          double miter_limit,
                          double flatness)
{
  int begin_idx, end_idx;
  int i;
  ArtVpath *forw, *rev;
  int n_forw, n_rev;
  int n_forw_max, n_rev_max;
  ArtVpath *result;
  int n_result, n_result_max;
  double half_lw = 0.5 * line_width;
  int closed;
  int last, this, next, second;
  double dx, dy;

  n_forw_max = 16;
  forw = art_new (ArtVpath, n_forw_max);

  n_rev_max = 16;
  rev = art_new (ArtVpath, n_rev_max);

  n_result = 0;
  n_result_max = 16;
  result = art_new (ArtVpath, n_result_max);

  for (begin_idx = 0; vpath[begin_idx].code != ART_END; begin_idx = end_idx)
    {
      n_forw = 0;
      n_rev = 0;

      closed = (vpath[begin_idx].code == ART_MOVETO);

      /* we don't know what the first point joins with until we get to the
         last point and see if it's closed. So we start with the second
         line in the path.

         Note: this is not strictly true (we now know it's closed from
         the opening pathcode), but why fix code that isn't broken?
      */

      this = begin_idx;
      /* skip over identical points at the beginning of the subpath */
      for (i = this + 1; vpath[i].code == ART_LINETO; i++)
        {
          dx = vpath[i].x - vpath[this].x;
          dy = vpath[i].y - vpath[this].y;
          if (dx * dx + dy * dy > EPSILON_2)
            break;
        }
      next = i;
      second = next;

      /* invariant: this doesn't coincide with next */
      while (vpath[next].code == ART_LINETO)
        {
          last = this;
          this = next;
          /* skip over identical points after the beginning of the subpath */
          for (i = this + 1; vpath[i].code == ART_LINETO; i++)
            {
              dx = vpath[i].x - vpath[this].x;
              dy = vpath[i].y - vpath[this].y;
              if (dx * dx + dy * dy > EPSILON_2)
                break;
            }
          next = i;
          if (vpath[next].code != ART_LINETO)
            {
              /* reached end of path */
              /* make "closed" detection conform to PostScript
                 semantics (i.e. explicit closepath code rather than
                 just the fact that end of the path is the beginning) */
              if (closed &&
                  vpath[this].x == vpath[begin_idx].x &&
                  vpath[this].y == vpath[begin_idx].y)
                {
                  int j;

                  /* path is closed, render join to beginning */
                  render_seg (&forw, &n_forw, &n_forw_max,
                              &rev, &n_rev, &n_rev_max,
                              vpath, last, this, second,
                              join, half_lw, miter_limit, flatness);

#ifdef VERBOSE
                  printf ("%% forw %d, rev %d\n", n_forw, n_rev);
#endif
                  /* do forward path */
                  art_vpath_add_point (&result, &n_result, &n_result_max,
                                   ART_MOVETO, forw[n_forw - 1].x,
                                   forw[n_forw - 1].y);
                  for (j = 0; j < n_forw; j++)
                    art_vpath_add_point (&result, &n_result, &n_result_max,
                                     ART_LINETO, forw[j].x,
                                     forw[j].y);

                  /* do reverse path, reversed */
                  art_vpath_add_point (&result, &n_result, &n_result_max,
                                   ART_MOVETO, rev[0].x,
                                   rev[0].y);
                  for (j = n_rev - 1; j >= 0; j--)
                    art_vpath_add_point (&result, &n_result, &n_result_max,
                                     ART_LINETO, rev[j].x,
                                     rev[j].y);
                }
              else
                {
                  /* path is open */
                  int j;

                  /* add to forw rather than result to ensure that
                     forw has at least one point. */
                  render_cap (&forw, &n_forw, &n_forw_max,
                              vpath, last, this,
                              cap, half_lw, flatness);
                  art_vpath_add_point (&result, &n_result, &n_result_max,
                                   ART_MOVETO, forw[0].x,
                                   forw[0].y);
                  for (j = 1; j < n_forw; j++)
                    art_vpath_add_point (&result, &n_result, &n_result_max,
                                     ART_LINETO, forw[j].x,
                                     forw[j].y);
                  for (j = n_rev - 1; j >= 0; j--)
                    art_vpath_add_point (&result, &n_result, &n_result_max,
                                     ART_LINETO, rev[j].x,
                                     rev[j].y);
                  render_cap (&result, &n_result, &n_result_max,
                              vpath, second, begin_idx,
                              cap, half_lw, flatness);
                  art_vpath_add_point (&result, &n_result, &n_result_max,
                                   ART_LINETO, forw[0].x,
                                   forw[0].y);
                }
            }
          else
            render_seg (&forw, &n_forw, &n_forw_max,
                        &rev, &n_rev, &n_rev_max,
                        vpath, last, this, next,
                        join, half_lw, miter_limit, flatness);
        }
      end_idx = next;
    }

  art_free (forw);
  art_free (rev);
#ifdef VERBOSE
  printf ("%% n_result = %d\n", n_result);
#endif
  art_vpath_add_point (&result, &n_result, &n_result_max, ART_END, 0, 0);
  return result;
}

#define noVERBOSE

#ifdef VERBOSE

#define XOFF 50
#define YOFF 700

static void
print_ps_vpath (ArtVpath *vpath)
{
  int i;

  for (i = 0; vpath[i].code != ART_END; i++)
    {
      switch (vpath[i].code)
        {
        case ART_MOVETO:
          printf ("%g %g moveto\n", XOFF + vpath[i].x, YOFF - vpath[i].y);
          break;
        case ART_LINETO:
          printf ("%g %g lineto\n", XOFF + vpath[i].x, YOFF - vpath[i].y);
          break;
        default:
          break;
        }
    }
  printf ("stroke showpage\n");
}

static void
print_ps_svp (ArtSVP *vpath)
{
  int i, j;

  printf ("%% begin\n");
  for (i = 0; i < vpath->n_segs; i++)
    {
      printf ("%g setgray\n", vpath->segs[i].dir ? 0.7 : 0);
      for (j = 0; j < vpath->segs[i].n_points; j++)
        {
          printf ("%g %g %s\n",
                  XOFF + vpath->segs[i].points[j].x,
                  YOFF - vpath->segs[i].points[j].y,
                  j ? "lineto" : "moveto");
        }
      printf ("stroke\n");
    }

  printf ("showpage\n");
}
#endif

/* Render a vector path into a stroked outline.

   Status of this routine:

   Basic correctness: Only miter and bevel line joins are implemented,
   and only butt line caps. Otherwise, seems to be fine.

   Numerical stability: We cheat (adding random perturbation). Thus,
   it seems very likely that no numerical stability problems will be
   seen in practice.

   Speed: Should be pretty good.

   Precision: The perturbation fuzzes the coordinates slightly,
   but not enough to be visible.  */
/**
 * art_svp_vpath_stroke: Stroke a vector path.
 * @vpath: #ArtVPath to stroke.
 * @join: Join style.
 * @cap: Cap style.
 * @line_width: Width of stroke.
 * @miter_limit: Miter limit.
 * @flatness: Flatness.
 *
 * Computes an svp representing the stroked outline of @vpath. The
 * width of the stroked line is @line_width.
 *
 * Lines are joined according to the @join rule. Possible values are
 * ART_PATH_STROKE_JOIN_MITER (for mitered joins),
 * ART_PATH_STROKE_JOIN_ROUND (for round joins), and
 * ART_PATH_STROKE_JOIN_BEVEL (for bevelled joins). The mitered join
 * is converted to a bevelled join if the miter would extend to a
 * distance of more than @miter_limit * @line_width from the actual
 * join point.
 *
 * If there are open subpaths, the ends of these subpaths are capped
 * according to the @cap rule. Possible values are
 * ART_PATH_STROKE_CAP_BUTT (squared cap, extends exactly to end
 * point), ART_PATH_STROKE_CAP_ROUND (rounded half-circle centered at
 * the end point), and ART_PATH_STROKE_CAP_SQUARE (squared cap,
 * extending half @line_width past the end point).
 *
 * The @flatness parameter controls the accuracy of the rendering. It
 * is most important for determining the number of points to use to
 * approximate circular arcs for round lines and joins. In general, the
 * resulting vector path will be within @flatness pixels of the "ideal"
 * path containing actual circular arcs. I reserve the right to use
 * the @flatness parameter to convert bevelled joins to miters for very
 * small turn angles, as this would reduce the number of points in the
 * resulting outline path.
 *
 * The resulting path is "clean" with respect to self-intersections, i.e.
 * the winding number is 0 or 1 at each point.
 *
 * Return value: Resulting stroked outline in svp format.
 **/
ArtSVP *
art_svp_vpath_stroke (ArtVpath *vpath,
                      ArtPathStrokeJoinType join,
                      ArtPathStrokeCapType cap,
                      double line_width,
                      double miter_limit,
                      double flatness)
{
#ifdef ART_USE_NEW_INTERSECTOR
  ArtVpath *vpath_stroke;
  ArtSVP *svp, *svp2;
  ArtSvpWriter *swr;

  vpath_stroke = art_svp_vpath_stroke_raw (vpath, join, cap,
                                           line_width, miter_limit, flatness);
#ifdef VERBOSE
  print_ps_vpath (vpath_stroke);
#endif
  svp = art_svp_from_vpath (vpath_stroke);
#ifdef VERBOSE
  print_ps_svp (svp);
#endif
  art_free (vpath_stroke);

  swr = art_svp_writer_rewind_new (ART_WIND_RULE_NONZERO);
  art_svp_intersector (svp, swr);

  svp2 = art_svp_writer_rewind_reap (swr);
#ifdef VERBOSE
  print_ps_svp (svp2);
#endif
  art_svp_free (svp);
  return svp2;
#else
  ArtVpath *vpath_stroke, *vpath2;
  ArtSVP *svp, *svp2, *svp3;

  vpath_stroke = art_svp_vpath_stroke_raw (vpath, join, cap,
                                           line_width, miter_limit, flatness);
#ifdef VERBOSE
  print_ps_vpath (vpath_stroke);
#endif
  vpath2 = art_vpath_perturb (vpath_stroke);
#ifdef VERBOSE
  print_ps_vpath (vpath2);
#endif
  art_free (vpath_stroke);
  svp = art_svp_from_vpath (vpath2);
#ifdef VERBOSE
  print_ps_svp (svp);
#endif
  art_free (vpath2);
  svp2 = art_svp_uncross (svp);
#ifdef VERBOSE
  print_ps_svp (svp2);
#endif
  art_svp_free (svp);
  svp3 = art_svp_rewind_uncrossed (svp2, ART_WIND_RULE_NONZERO);
#ifdef VERBOSE
  print_ps_svp (svp3);
#endif
  art_svp_free (svp2);

  return svp3;
#endif
}