| 1 | #! /bin/sh |
|---|
| 2 | case $CONFIGDOTSH in |
|---|
| 3 | '') |
|---|
| 4 | if test -f config.sh; then TOP=.; |
|---|
| 5 | elif test -f ../config.sh; then TOP=..; |
|---|
| 6 | elif test -f ../../config.sh; then TOP=../..; |
|---|
| 7 | elif test -f ../../../config.sh; then TOP=../../..; |
|---|
| 8 | elif test -f ../../../../config.sh; then TOP=../../../..; |
|---|
| 9 | else |
|---|
| 10 | echo "Can't find config.sh."; exit 1 |
|---|
| 11 | fi |
|---|
| 12 | . $TOP/config.sh |
|---|
| 13 | ;; |
|---|
| 14 | esac |
|---|
| 15 | : This forces SH files to create target in same directory as SH file. |
|---|
| 16 | : This is so that make depend always knows where to find SH derivatives. |
|---|
| 17 | case "$0" in |
|---|
| 18 | */*) cd `expr X$0 : 'X\(.*\)/'` ;; |
|---|
| 19 | esac |
|---|
| 20 | |
|---|
| 21 | case "$d_dosuid" in |
|---|
| 22 | *define*) suidperl='suidperl' ;; |
|---|
| 23 | *) suidperl='';; |
|---|
| 24 | esac |
|---|
| 25 | |
|---|
| 26 | linklibperl='$(LIBPERL)' |
|---|
| 27 | shrpldflags='$(LDDLFLAGS)' |
|---|
| 28 | ldlibpth='' |
|---|
| 29 | case "$useshrplib" in |
|---|
| 30 | true) |
|---|
| 31 | # Prefix all runs of 'miniperl' and 'perl' with |
|---|
| 32 | # $ldlibpth so that ./perl finds *this* shared libperl. |
|---|
| 33 | case "$LD_LIBRARY_PATH" in |
|---|
| 34 | '') |
|---|
| 35 | ldlibpth="LD_LIBRARY_PATH=`pwd`";; |
|---|
| 36 | *) |
|---|
| 37 | ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; |
|---|
| 38 | esac |
|---|
| 39 | |
|---|
| 40 | pldlflags="$cccdlflags" |
|---|
| 41 | case "${osname}${osvers}" in |
|---|
| 42 | next4*) |
|---|
| 43 | ld=libtool |
|---|
| 44 | lddlflags="-dynamic -undefined warning -framework System \ |
|---|
| 45 | -compatibility_version 1 -current_version $patchlevel \ |
|---|
| 46 | -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" |
|---|
| 47 | ;; |
|---|
| 48 | rhapsody*|darwin*) |
|---|
| 49 | shrpldflags="${ldflags} -dynamiclib \ |
|---|
| 50 | -compatibility_version 1 \ |
|---|
| 51 | -current_version \ |
|---|
| 52 | ${api_version}.${api_subversion} \ |
|---|
| 53 | -image_base 0x4be00000 \ |
|---|
| 54 | -install_name \$(shrpdir)/\$@" |
|---|
| 55 | ;; |
|---|
| 56 | cygwin*) |
|---|
| 57 | linklibperl="-lperl" |
|---|
| 58 | ;; |
|---|
| 59 | sunos*) |
|---|
| 60 | linklibperl="-lperl" |
|---|
| 61 | ;; |
|---|
| 62 | netbsd*|freebsd[234]*|openbsd*) |
|---|
| 63 | linklibperl="-L. -lperl" |
|---|
| 64 | ;; |
|---|
| 65 | aix*) |
|---|
| 66 | shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" |
|---|
| 67 | case "$osvers" in |
|---|
| 68 | 3*) shrpldflags="$shrpldflags -e _nostart" |
|---|
| 69 | ;; |
|---|
| 70 | *) shrpldflags="$shrpldflags -b noentry" |
|---|
| 71 | ;; |
|---|
| 72 | esac |
|---|
| 73 | shrpldflags="$shrpldflags $ldflags $libs $cryptlib" |
|---|
| 74 | linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" |
|---|
| 75 | ;; |
|---|
| 76 | hpux*) |
|---|
| 77 | linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" |
|---|
| 78 | ;; |
|---|
| 79 | esac |
|---|
| 80 | case "$ldlibpthname" in |
|---|
| 81 | '') ;; |
|---|
| 82 | *) |
|---|
| 83 | case "$osname" in |
|---|
| 84 | os2) |
|---|
| 85 | ldlibpth='' |
|---|
| 86 | ;; |
|---|
| 87 | *) |
|---|
| 88 | eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" |
|---|
| 89 | ;; |
|---|
| 90 | esac |
|---|
| 91 | # Strip off any trailing :'s |
|---|
| 92 | ldlibpth=`echo $ldlibpth | sed 's/:*$//'` |
|---|
| 93 | ;; |
|---|
| 94 | esac |
|---|
| 95 | ;; |
|---|
| 96 | *) pldlflags='' |
|---|
| 97 | ;; |
|---|
| 98 | esac |
|---|
| 99 | |
|---|
| 100 | : Prepare dependency lists for Makefile. |
|---|
| 101 | dynamic_list=' ' |
|---|
| 102 | for f in $dynamic_ext; do |
|---|
| 103 | : the dependency named here will never exist |
|---|
| 104 | base=`echo "$f" | sed 's/.*\///'` |
|---|
| 105 | dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext" |
|---|
| 106 | done |
|---|
| 107 | |
|---|
| 108 | static_list=' ' |
|---|
| 109 | for f in $static_ext; do |
|---|
| 110 | base=`echo "$f" | sed 's/.*\///'` |
|---|
| 111 | static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" |
|---|
| 112 | done |
|---|
| 113 | |
|---|
| 114 | nonxs_list=' ' |
|---|
| 115 | for f in $nonxs_ext; do |
|---|
| 116 | base=`echo "$f" | sed 's/.*\///'` |
|---|
| 117 | nonxs_list="$nonxs_list ext/$f/pm_to_blib" |
|---|
| 118 | done |
|---|
| 119 | |
|---|
| 120 | echo "Extracting Makefile (with variable substitutions)" |
|---|
| 121 | $spitshell >Makefile <<!GROK!THIS! |
|---|
| 122 | # Makefile.SH |
|---|
| 123 | # This file is derived from Makefile.SH. Any changes made here will |
|---|
| 124 | # be lost the next time you run Configure. |
|---|
| 125 | # Makefile is used to generate $firstmakefile. The only difference |
|---|
| 126 | # is that $firstmakefile has the dependencies filled in at the end. |
|---|
| 127 | # |
|---|
| 128 | # |
|---|
| 129 | # I now supply perly.c with the kits, so don't remake perly.c without byacc |
|---|
| 130 | BYACC = $byacc |
|---|
| 131 | CC = $cc |
|---|
| 132 | LD = $ld |
|---|
| 133 | |
|---|
| 134 | LDFLAGS = $ldflags |
|---|
| 135 | CLDFLAGS = $ldflags |
|---|
| 136 | |
|---|
| 137 | SMALL = $small |
|---|
| 138 | LARGE = $large $split |
|---|
| 139 | mallocsrc = $mallocsrc |
|---|
| 140 | mallocobj = $mallocobj |
|---|
| 141 | LNS = $lns |
|---|
| 142 | RMS = rm -f |
|---|
| 143 | ranlib = $ranlib |
|---|
| 144 | |
|---|
| 145 | # The following are mentioned only to make metaconfig include the |
|---|
| 146 | # appropriate questions in Configure. If you want to change these, |
|---|
| 147 | # edit config.sh instead, or specify --man1dir=/wherever on |
|---|
| 148 | # installman commandline. |
|---|
| 149 | bin = $installbin |
|---|
| 150 | scriptdir = $scriptdir |
|---|
| 151 | shrpdir = $archlibexp/CORE |
|---|
| 152 | privlib = $installprivlib |
|---|
| 153 | man1dir = $man1dir |
|---|
| 154 | man1ext = $man1ext |
|---|
| 155 | man3dir = $man3dir |
|---|
| 156 | man3ext = $man3ext |
|---|
| 157 | |
|---|
| 158 | # The following are used to build and install shared libraries for |
|---|
| 159 | # dynamic loading. |
|---|
| 160 | LDDLFLAGS = $lddlflags |
|---|
| 161 | SHRPLDFLAGS = $shrpldflags |
|---|
| 162 | CCDLFLAGS = $ccdlflags |
|---|
| 163 | DLSUFFIX = .$dlext |
|---|
| 164 | PLDLFLAGS = $pldlflags |
|---|
| 165 | LIBPERL = $libperl |
|---|
| 166 | LLIBPERL= $linklibperl |
|---|
| 167 | SHRPENV = $shrpenv |
|---|
| 168 | |
|---|
| 169 | # The following is used to include the current directory in |
|---|
| 170 | # the dynamic loader path you are building a shared libperl. |
|---|
| 171 | LDLIBPTH = $ldlibpth |
|---|
| 172 | |
|---|
| 173 | dynamic_ext = $dynamic_list |
|---|
| 174 | static_ext = $static_list |
|---|
| 175 | nonxs_ext = $nonxs_list |
|---|
| 176 | ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) |
|---|
| 177 | DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT) |
|---|
| 178 | |
|---|
| 179 | libs = $libs $cryptlib |
|---|
| 180 | |
|---|
| 181 | public = perl $suidperl utilities translators |
|---|
| 182 | |
|---|
| 183 | shellflags = $shellflags |
|---|
| 184 | |
|---|
| 185 | # This is set to MAKE=$make if your $make command doesn't |
|---|
| 186 | # do it for you. |
|---|
| 187 | $make_set_make |
|---|
| 188 | |
|---|
| 189 | # These variables may need to be manually set for non-Unix systems. |
|---|
| 190 | AR = $full_ar |
|---|
| 191 | EXE_EXT = $_exe |
|---|
| 192 | LIB_EXT = $_a |
|---|
| 193 | OBJ_EXT = $_o |
|---|
| 194 | PATH_SEP = $p_ |
|---|
| 195 | |
|---|
| 196 | FIRSTMAKEFILE = $firstmakefile |
|---|
| 197 | |
|---|
| 198 | # Any special object files needed by this architecture, e.g. os2/os2.obj |
|---|
| 199 | ARCHOBJS = $archobjs |
|---|
| 200 | |
|---|
| 201 | .SUFFIXES: .c \$(OBJ_EXT) |
|---|
| 202 | |
|---|
| 203 | # grrr |
|---|
| 204 | SHELL = $sh |
|---|
| 205 | |
|---|
| 206 | # how to tr(anslate) newlines |
|---|
| 207 | TRNL = '$trnl' |
|---|
| 208 | |
|---|
| 209 | # not used by Makefile but by installperl; |
|---|
| 210 | # mentioned here so that metaconfig picks it up |
|---|
| 211 | INSTALL_USR_BIN_PERL = $installusrbinperl |
|---|
| 212 | |
|---|
| 213 | !GROK!THIS! |
|---|
| 214 | |
|---|
| 215 | ## In the following dollars and backticks do not need the extra backslash. |
|---|
| 216 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 217 | |
|---|
| 218 | CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@` |
|---|
| 219 | |
|---|
| 220 | private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm |
|---|
| 221 | |
|---|
| 222 | # Files to be built with variable substitution before miniperl |
|---|
| 223 | # is available. |
|---|
| 224 | sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \ |
|---|
| 225 | makedir.SH myconfig.SH writemain.SH |
|---|
| 226 | |
|---|
| 227 | shextract = Makefile cflags config.h makeaperl makedepend \ |
|---|
| 228 | makedir myconfig writemain |
|---|
| 229 | |
|---|
| 230 | # Files to be built with variable substitution after miniperl is |
|---|
| 231 | # available. Dependencies handled manually below (for now). |
|---|
| 232 | |
|---|
| 233 | pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \ |
|---|
| 234 | pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL |
|---|
| 235 | |
|---|
| 236 | plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \ |
|---|
| 237 | pod/pod2usage pod/podchecker pod/podselect |
|---|
| 238 | |
|---|
| 239 | addedbyconf = UU $(shextract) $(plextract) pstruct |
|---|
| 240 | |
|---|
| 241 | h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h |
|---|
| 242 | h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h |
|---|
| 243 | h3 = opcode.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h |
|---|
| 244 | h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h |
|---|
| 245 | h5 = utf8.h warnings.h |
|---|
| 246 | h = $(h1) $(h2) $(h3) $(h4) $(h5) |
|---|
| 247 | |
|---|
| 248 | c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c |
|---|
| 249 | c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c |
|---|
| 250 | c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c |
|---|
| 251 | c4 = globals.c perlio.c perlapi.c |
|---|
| 252 | |
|---|
| 253 | c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c |
|---|
| 254 | |
|---|
| 255 | obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) |
|---|
| 256 | obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) |
|---|
| 257 | obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) |
|---|
| 258 | |
|---|
| 259 | obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) |
|---|
| 260 | |
|---|
| 261 | # Once perl has been Configure'd and built ok you build different |
|---|
| 262 | # perl variants (Debugging, Embedded, Multiplicity etc) by saying: |
|---|
| 263 | # make clean; make LIBPERL=libperl<type>.a |
|---|
| 264 | # where <type> is some combination of 'd' and(or) 'e' or 'm'. |
|---|
| 265 | # See cflags to understand how this works. |
|---|
| 266 | # |
|---|
| 267 | # This mechanism is getting clunky and might not even work any more. |
|---|
| 268 | # EMBEDDING is on by default, and MULTIPLICITY doesn't work. |
|---|
| 269 | # |
|---|
| 270 | |
|---|
| 271 | lintflags = -hbvxac |
|---|
| 272 | |
|---|
| 273 | .c$(OBJ_EXT): |
|---|
| 274 | $(CCCMD) $(PLDLFLAGS) $*.c |
|---|
| 275 | |
|---|
| 276 | all: $(FIRSTMAKEFILE) miniperl extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext) |
|---|
| 277 | @echo " "; |
|---|
| 278 | @echo " Everything is up to date. 'make test' to run test suite." |
|---|
| 279 | |
|---|
| 280 | compile: all |
|---|
| 281 | echo "testing compilation" > testcompile; |
|---|
| 282 | cd utils; $(MAKE) compile; |
|---|
| 283 | cd x2p; $(MAKE) compile; |
|---|
| 284 | cd pod; $(MAKE) compile; |
|---|
| 285 | |
|---|
| 286 | translators: miniperl lib/Config.pm FORCE |
|---|
| 287 | @echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all |
|---|
| 288 | |
|---|
| 289 | utilities: miniperl lib/Config.pm $(plextract) FORCE |
|---|
| 290 | @echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all |
|---|
| 291 | |
|---|
| 292 | |
|---|
| 293 | # This is now done by installman only if you actually want the man pages. |
|---|
| 294 | # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; |
|---|
| 295 | |
|---|
| 296 | # Phony target to force checking subdirectories. |
|---|
| 297 | # Apparently some makes require an action for the FORCE target. |
|---|
| 298 | FORCE: |
|---|
| 299 | @sh -c true |
|---|
| 300 | |
|---|
| 301 | opmini$(OBJ_EXT): op.c |
|---|
| 302 | $(RMS) opmini.c |
|---|
| 303 | $(LNS) op.c opmini.c |
|---|
| 304 | $(CCCMD) $(PLDLFLAGS) -DPERL_EXTERNAL_GLOB opmini.c |
|---|
| 305 | $(RMS) opmini.c |
|---|
| 306 | |
|---|
| 307 | miniperlmain$(OBJ_EXT): miniperlmain.c |
|---|
| 308 | $(CCCMD) $(PLDLFLAGS) $*.c |
|---|
| 309 | |
|---|
| 310 | perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) |
|---|
| 311 | sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp |
|---|
| 312 | sh mv-if-diff writemain.tmp perlmain.c |
|---|
| 313 | |
|---|
| 314 | perlmain$(OBJ_EXT): perlmain.c |
|---|
| 315 | $(CCCMD) $(PLDLFLAGS) $*.c |
|---|
| 316 | |
|---|
| 317 | # The file ext.libs is a list of libraries that must be linked in |
|---|
| 318 | # for static extensions, e.g. -lm -lgdbm, etc. The individual |
|---|
| 319 | # static extension Makefile's add to it. |
|---|
| 320 | ext.libs: $(static_ext) |
|---|
| 321 | -@test -f ext.libs || touch ext.libs |
|---|
| 322 | |
|---|
| 323 | !NO!SUBS! |
|---|
| 324 | |
|---|
| 325 | # How to build libperl. This is still rather convoluted. |
|---|
| 326 | # Load up custom Makefile.SH fragment for shared loading and executables: |
|---|
| 327 | case "$osname" in |
|---|
| 328 | *) |
|---|
| 329 | Makefile_s="$osname/Makefile.SHs" |
|---|
| 330 | ;; |
|---|
| 331 | esac |
|---|
| 332 | |
|---|
| 333 | case "$osname" in |
|---|
| 334 | aix) |
|---|
| 335 | $spitshell >>Makefile <<!GROK!THIS! |
|---|
| 336 | LIBS = $libs |
|---|
| 337 | # In AIX we need to change this for building Perl itself from |
|---|
| 338 | # its earlier definition (which is for building external |
|---|
| 339 | # extensions *after* Perl has been built and installed) |
|---|
| 340 | CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` |
|---|
| 341 | |
|---|
| 342 | !GROK!THIS! |
|---|
| 343 | case "$useshrplib" in |
|---|
| 344 | define|true|[yY]*) |
|---|
| 345 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 346 | |
|---|
| 347 | LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) |
|---|
| 348 | MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) |
|---|
| 349 | |
|---|
| 350 | $(LIBPERL_NONSHR): perl$(OBJ_EXT) $(obj) |
|---|
| 351 | $(RMS) $(LIBPERL_NONSHR) |
|---|
| 352 | $(AR) rcu $(LIBPERL_NONSHR) perl$(OBJ_EXT) $(obj) |
|---|
| 353 | |
|---|
| 354 | $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) |
|---|
| 355 | $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ |
|---|
| 356 | opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) |
|---|
| 357 | |
|---|
| 358 | MINIPERLEXP = $(MINIPERL_NONSHR) |
|---|
| 359 | |
|---|
| 360 | LIBPERLEXPORT = perl.exp |
|---|
| 361 | |
|---|
| 362 | !NO!SUBS! |
|---|
| 363 | |
|---|
| 364 | ;; |
|---|
| 365 | *) |
|---|
| 366 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 367 | MINIPERLEXP = miniperl$(EXE_EXT) |
|---|
| 368 | |
|---|
| 369 | PERLEXPORT = perl.exp |
|---|
| 370 | |
|---|
| 371 | !NO!SUBS! |
|---|
| 372 | ;; |
|---|
| 373 | esac |
|---|
| 374 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 375 | perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) |
|---|
| 376 | ./$(MINIPERLEXP) makedef.pl PLATFORM=aix | sort -u | sort -f > perl.exp.tmp |
|---|
| 377 | sh mv-if-diff perl.exp.tmp perl.exp |
|---|
| 378 | |
|---|
| 379 | !NO!SUBS! |
|---|
| 380 | ;; |
|---|
| 381 | os2) |
|---|
| 382 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 383 | MINIPERLEXP = miniperl |
|---|
| 384 | |
|---|
| 385 | perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map |
|---|
| 386 | ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) > perl.exp.tmp |
|---|
| 387 | sh mv-if-diff perl.exp.tmp perl5.def |
|---|
| 388 | |
|---|
| 389 | !NO!SUBS! |
|---|
| 390 | ;; |
|---|
| 391 | esac |
|---|
| 392 | |
|---|
| 393 | if test -r $Makefile_s ; then |
|---|
| 394 | . $Makefile_s |
|---|
| 395 | $spitshell >>Makefile <<!GROK!THIS! |
|---|
| 396 | |
|---|
| 397 | Makefile: $Makefile_s |
|---|
| 398 | !GROK!THIS! |
|---|
| 399 | else |
|---|
| 400 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 401 | $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT) |
|---|
| 402 | !NO!SUBS! |
|---|
| 403 | case "$useshrplib" in |
|---|
| 404 | true) |
|---|
| 405 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 406 | $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj) |
|---|
| 407 | !NO!SUBS! |
|---|
| 408 | case "$osname" in |
|---|
| 409 | aix) |
|---|
| 410 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 411 | rm -f libperl$(OBJ_EXT) |
|---|
| 412 | mv $@ libperl$(OBJ_EXT) |
|---|
| 413 | $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) |
|---|
| 414 | !NO!SUBS! |
|---|
| 415 | ;; |
|---|
| 416 | esac |
|---|
| 417 | ;; |
|---|
| 418 | *) |
|---|
| 419 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 420 | rm -f $(LIBPERL) |
|---|
| 421 | $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj) |
|---|
| 422 | @$(ranlib) $(LIBPERL) |
|---|
| 423 | !NO!SUBS! |
|---|
| 424 | ;; |
|---|
| 425 | esac |
|---|
| 426 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 427 | |
|---|
| 428 | # How to build executables. |
|---|
| 429 | |
|---|
| 430 | # The $& notation tells Sequent machines that it can do a parallel make, |
|---|
| 431 | # and is harmless otherwise. |
|---|
| 432 | # The miniperl -w -MExporter line is a basic cheap test to catch errors |
|---|
| 433 | # before make goes on to run preplibrary and then MakeMaker on extensions. |
|---|
| 434 | # This is very handy because later errors are often caused by miniperl |
|---|
| 435 | # build problems but that's not obvious to the novice. |
|---|
| 436 | # The Module used here must not depend on Config or any extensions. |
|---|
| 437 | |
|---|
| 438 | !NO!SUBS! |
|---|
| 439 | |
|---|
| 440 | case "${osname}${osvers}" in |
|---|
| 441 | next4*) |
|---|
| 442 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 443 | miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) |
|---|
| 444 | $(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \ |
|---|
| 445 | miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs) |
|---|
| 446 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
|---|
| 447 | !NO!SUBS! |
|---|
| 448 | ;; |
|---|
| 449 | aix*) |
|---|
| 450 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 451 | miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) |
|---|
| 452 | $(CC) -o miniperl $(CLDFLAGS) \ |
|---|
| 453 | `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \ |
|---|
| 454 | miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs) |
|---|
| 455 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
|---|
| 456 | !NO!SUBS! |
|---|
| 457 | ;; |
|---|
| 458 | *) |
|---|
| 459 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 460 | miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) |
|---|
| 461 | $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) -o miniperl \ |
|---|
| 462 | miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs) |
|---|
| 463 | $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
|---|
| 464 | !NO!SUBS! |
|---|
| 465 | ;; |
|---|
| 466 | esac |
|---|
| 467 | |
|---|
| 468 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 469 | |
|---|
| 470 | perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT) |
|---|
| 471 | $(SHRPENV) $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
|---|
| 472 | |
|---|
| 473 | pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT) |
|---|
| 474 | $(SHRPENV) $(LDLIBPTH) purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
|---|
| 475 | |
|---|
| 476 | purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT) |
|---|
| 477 | $(SHRPENV) $(LDLIBPTH) purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
|---|
| 478 | |
|---|
| 479 | quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT) |
|---|
| 480 | $(SHRPENV) $(LDLIBPTH) quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
|---|
| 481 | |
|---|
| 482 | # This version, if specified in Configure, does ONLY those scripts which need |
|---|
| 483 | # set-id emulation. Suidperl must be setuid root. It contains the "taint" |
|---|
| 484 | # checks as well as the special code to validate that the script in question |
|---|
| 485 | # has been invoked correctly. |
|---|
| 486 | |
|---|
| 487 | suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT) |
|---|
| 488 | $(SHRPENV) $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
|---|
| 489 | |
|---|
| 490 | !NO!SUBS! |
|---|
| 491 | |
|---|
| 492 | fi |
|---|
| 493 | |
|---|
| 494 | $spitshell >>Makefile <<'!NO!SUBS!' |
|---|
| 495 | |
|---|
| 496 | sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h) |
|---|
| 497 | $(RMS) sperl.c |
|---|
| 498 | $(LNS) perl.c sperl.c |
|---|
| 499 | $(CCCMD) -DIAMSUID sperl.c |
|---|
| 500 | $(RMS) sperl.c |
|---|
| 501 | |
|---|
| 502 | # We have to call our ./makedir because Ultrix 4.3 make can't handle the line |
|---|
| 503 | # test -d lib/auto || mkdir lib/auto |
|---|
| 504 | # |
|---|
| 505 | preplibrary: miniperl lib/Config.pm |
|---|
| 506 | @sh ./makedir lib/auto |
|---|
| 507 | @echo " AutoSplitting perl library" |
|---|
| 508 | $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \ |
|---|
| 509 | autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm |
|---|
| 510 | |
|---|
| 511 | # Take care to avoid modifying lib/Config.pm without reason |
|---|
| 512 | # (If trying to create a new port and having problems with the configpm script, |
|---|
| 513 | # try 'make minitest' and/or commenting out the tests at the end of configpm.) |
|---|
| 514 | lib/Config.pm: config.sh miniperl configpm lib/re.pm |
|---|
| 515 | $(LDLIBPTH) ./miniperl configpm configpm.tmp |
|---|
| 516 | sh mv-if-diff configpm.tmp $@ |
|---|
| 517 | |
|---|
| 518 | lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm |
|---|
| 519 | $(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp |
|---|
| 520 | sh mv-if-diff minimod.tmp $@ |
|---|
| 521 | |
|---|
| 522 | lib/re.pm: ext/re/re.pm |
|---|
| 523 | rm -f $@ |
|---|
| 524 | cat ext/re/re.pm > $@ |
|---|
| 525 | |
|---|
| 526 | $(plextract): miniperl lib/Config.pm |
|---|
| 527 | $(LDLIBPTH) ./miniperl -Ilib $@.PL |
|---|
| 528 | |
|---|
| 529 | extra.pods: miniperl |
|---|
| 530 | -@test -f extra.pods && rm -f `cat extra.pods` |
|---|
| 531 | -@rm -f extra.pods |
|---|
| 532 | -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ |
|---|
| 533 | nx=`echo $$x | sed -e "s/README\.//"`; \ |
|---|
| 534 | $(LNS) ../$$x "pod/perl"$$nx".pod" ; \ |
|---|
| 535 | echo "pod/perl"$$nx".pod" >> extra.pods ; \ |
|---|
| 536 | done |
|---|
| 537 | -@test -f vms/perlvms.pod && $(LNS) ../vms/perlvms.pod pod/perlvms.pod && echo "pod/perlvms.pod" >> extra.pods |
|---|
| 538 | |
|---|
| 539 | install-strip: |
|---|
| 540 | $(MAKE) STRIPFLAGS=-s install |
|---|
| 541 | |
|---|
| 542 | install: all install.perl install.man |
|---|
| 543 | |
|---|
| 544 | install.perl: all installperl |
|---|
| 545 | if [ -n "$(COMPILE)" ]; \ |
|---|
| 546 | then \ |
|---|
| 547 | cd utils; $(MAKE) compile; \ |
|---|
| 548 | cd ../x2p; $(MAKE) compile; \ |
|---|
| 549 | cd ../pod; $(MAKE) compile; \ |
|---|
| 550 | else :; \ |
|---|
| 551 | fi |
|---|
| 552 | $(LDLIBPTH) DESTDIR=${DESTDIR} ./perl installperl $(STRIPFLAGS) |
|---|
| 553 | |
|---|
| 554 | install.man: all installman |
|---|
| 555 | $(LDLIBPTH) DESTDIR=${DESTDIR} ./perl installman |
|---|
| 556 | |
|---|
| 557 | # XXX Experimental. Hardwired values, but useful for testing. |
|---|
| 558 | # Eventually Configure could ask for some of these values. |
|---|
| 559 | install.html: all installhtml |
|---|
| 560 | -@test -f README.vms && $(LNS) ../README.vms vms/README_vms.pod |
|---|
| 561 | $(LDLIBPTH) ./perl installhtml \ |
|---|
| 562 | --podroot=. --podpath=. --recurse \ |
|---|
| 563 | --htmldir=$(privlib)/html \ |
|---|
| 564 | --htmlroot=$(privlib)/html \ |
|---|
| 565 | --splithead=pod/perlipc \ |
|---|
| 566 | --splititem=pod/perlfunc \ |
|---|
| 567 | --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ |
|---|
| 568 | --verbose |
|---|
| 569 | |
|---|
| 570 | |
|---|
| 571 | # I now supply perly.c with the kits, so the following section is |
|---|
| 572 | # used only if you force byacc to run by saying |
|---|
| 573 | # make run_byacc |
|---|
| 574 | # Since we patch up the byacc output, the perly.fixer script needs |
|---|
| 575 | # to run with precisely the same version of byacc as I use. You |
|---|
| 576 | # normally shouldn't remake perly.[ch]. |
|---|
| 577 | |
|---|
| 578 | run_byacc: FORCE |
|---|
| 579 | $(BYACC) -d perly.y |
|---|
| 580 | -chmod 664 perly.c |
|---|
| 581 | sh $(shellflags) ./perly.fixer y.tab.c perly.c |
|---|
| 582 | sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ |
|---|
| 583 | -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c |
|---|
| 584 | sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h |
|---|
| 585 | cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h |
|---|
| 586 | chmod 664 vms/perly_c.vms vms/perly_h.vms |
|---|
| 587 | perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms |
|---|
| 588 | |
|---|
| 589 | # We don't want to regenerate perly.c and perly.h, but they might |
|---|
| 590 | # appear out-of-date after a patch is applied or a new distribution is |
|---|
| 591 | # made. |
|---|
| 592 | perly.c: perly.y |
|---|
| 593 | -@sh -c true |
|---|
| 594 | |
|---|
| 595 | perly.h: perly.y |
|---|
| 596 | -@sh -c true |
|---|
| 597 | |
|---|
| 598 | # No compat3.sym here since and including the 5.004_50. |
|---|
| 599 | # No interp.sym since 5.005_03. |
|---|
| 600 | SYM = global.sym globvar.sym perlio.sym pp.sym |
|---|
| 601 | |
|---|
| 602 | SYMH = perlvars.h intrpvar.h thrdvar.h |
|---|
| 603 | |
|---|
| 604 | CHMOD_W = chmod +w |
|---|
| 605 | |
|---|
| 606 | # The following files are generated automatically |
|---|
| 607 | # keywords.pl: keywords.h |
|---|
| 608 | # opcode.pl: opcode.h opnames.h pp_proto.h pp.sym |
|---|
| 609 | # [* embed.pl needs pp.sym generated by opcode.pl! *] |
|---|
| 610 | # embed.pl: proto.h embed.h embedvar.h global.sym objXSUB.h |
|---|
| 611 | # perlapi.h perlapi.c pod/perlintern.pod |
|---|
| 612 | # pod/perlapi.pod |
|---|
| 613 | # bytecode.pl: ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c |
|---|
| 614 | # ext/B/B/Asmdata.pm |
|---|
| 615 | # regcomp.pl: regnodes.h |
|---|
| 616 | # warnings.pl: warnings.h lib/warnings.pm |
|---|
| 617 | # The correct versions should be already supplied with the perl kit, |
|---|
| 618 | # in case you don't have perl available. |
|---|
| 619 | # To force them to be regenerated, type |
|---|
| 620 | # make regen_headers |
|---|
| 621 | |
|---|
| 622 | AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ |
|---|
| 623 | embed.h embedvar.h global.sym \ |
|---|
| 624 | pod/perlintern.pod pod/perlapi.pod \ |
|---|
| 625 | objXSUB.h perlapi.h perlapi.c ext/ByteLoader/byterun.h \ |
|---|
| 626 | ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm regnodes.h \ |
|---|
| 627 | warnings.h lib/warnings.pm |
|---|
| 628 | |
|---|
| 629 | regen_headers: FORCE |
|---|
| 630 | -$(CHMOD_W) $(AUTOGEN_FILES) |
|---|
| 631 | -perl keywords.pl |
|---|
| 632 | -perl opcode.pl |
|---|
| 633 | -perl embed.pl |
|---|
| 634 | -perl bytecode.pl |
|---|
| 635 | -perl regcomp.pl |
|---|
| 636 | -perl warnings.pl |
|---|
| 637 | |
|---|
| 638 | # Extensions: |
|---|
| 639 | # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will |
|---|
| 640 | # automatically get built. There should ordinarily be no need to change |
|---|
| 641 | # any of this part of makefile. |
|---|
| 642 | # |
|---|
| 643 | # The dummy dependency is a place holder in case $(dynamic_ext) or |
|---|
| 644 | # $(static_ext) is empty. |
|---|
| 645 | # |
|---|
| 646 | # DynaLoader may be needed for extensions that use Makefile.PL. |
|---|
| 647 | |
|---|
| 648 | $(DYNALOADER): miniperl preplibrary FORCE |
|---|
| 649 | @$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
|---|
| 650 | |
|---|
| 651 | d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE |
|---|
| 652 | @$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
|---|
| 653 | |
|---|
| 654 | s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE |
|---|
| 655 | @$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
|---|
| 656 | |
|---|
| 657 | n_dummy $(nonxs_ext): miniperl preplibrary $(DYNALOADER) FORCE |
|---|
| 658 | @$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
|---|
| 659 | |
|---|
| 660 | clean: _tidy _mopup |
|---|
| 661 | |
|---|
| 662 | realclean: _cleaner _mopup |
|---|
| 663 | @echo "Note that make realclean does not delete config.sh or Policy.sh" |
|---|
| 664 | |
|---|
| 665 | clobber: _cleaner _mopup |
|---|
| 666 | rm -f config.sh cppstdin Policy.sh |
|---|
| 667 | |
|---|
| 668 | distclean: clobber |
|---|
| 669 | |
|---|
| 670 | # Do not 'make _mopup' directly. |
|---|
| 671 | _mopup: |
|---|
| 672 | rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c |
|---|
| 673 | -@test -f extra.pods && rm -f `cat extra.pods` |
|---|
| 674 | -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod |
|---|
| 675 | -rm -f perl.exp ext.libs extra.pods |
|---|
| 676 | -rm -f perl.export perl.dll perl.libexp perl.map perl.def |
|---|
| 677 | -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap |
|---|
| 678 | rm -f perl suidperl miniperl $(LIBPERL) |
|---|
| 679 | |
|---|
| 680 | # Do not 'make _tidy' directly. |
|---|
| 681 | _tidy: |
|---|
| 682 | -cd pod; $(LDLIBPTH) $(MAKE) clean |
|---|
| 683 | -cd utils; $(LDLIBPTH) $(MAKE) clean |
|---|
| 684 | -cd x2p; $(LDLIBPTH) $(MAKE) clean |
|---|
| 685 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
|---|
| 686 | $(LDLIBPTH) sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \ |
|---|
| 687 | done |
|---|
| 688 | rm -f testcompile compilelog |
|---|
| 689 | |
|---|
| 690 | # Do not 'make _cleaner' directly. |
|---|
| 691 | _cleaner: |
|---|
| 692 | -cd os2; rm -f Makefile |
|---|
| 693 | -cd pod; $(LDLIBPTH) $(MAKE) realclean |
|---|
| 694 | -cd utils; $(LDLIBPTH) $(MAKE) realclean |
|---|
| 695 | -cd x2p; $(LDLIBPTH) $(MAKE) realclean |
|---|
| 696 | -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
|---|
| 697 | $(LDLIBPTH) sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \ |
|---|
| 698 | done |
|---|
| 699 | rm -f *.orig */*.orig *~ */*~ core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/tmp* t/c t/perl .?*.c so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) |
|---|
| 700 | rm -rf $(addedbyconf) |
|---|
| 701 | rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old |
|---|
| 702 | rm -f $(private) |
|---|
| 703 | rm -rf lib/auto |
|---|
| 704 | rm -f lib/.exists lib/*/.exists |
|---|
| 705 | rm -f h2ph.man pstruct |
|---|
| 706 | rm -rf .config |
|---|
| 707 | rm -f testcompile compilelog |
|---|
| 708 | -rmdir lib/B lib/Data lib/IO/Socket lib/IO |
|---|
| 709 | |
|---|
| 710 | # The following lint has practically everything turned on. Unfortunately, |
|---|
| 711 | # you have to wade through a lot of mumbo jumbo that can't be suppressed. |
|---|
| 712 | # If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message |
|---|
| 713 | # for that spot. |
|---|
| 714 | |
|---|
| 715 | lint: perly.c $(c) |
|---|
| 716 | lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz |
|---|
| 717 | |
|---|
| 718 | # Need to unset during recursion to go out of loop. |
|---|
| 719 | # The README below ensures that the dependency list is never empty and |
|---|
| 720 | # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. |
|---|
| 721 | |
|---|
| 722 | MAKEDEPEND = Makefile makedepend |
|---|
| 723 | |
|---|
| 724 | $(FIRSTMAKEFILE): README $(MAKEDEPEND) |
|---|
| 725 | $(MAKE) depend MAKEDEPEND= |
|---|
| 726 | |
|---|
| 727 | config.h: config_h.SH config.sh |
|---|
| 728 | $(SHELL) config_h.SH |
|---|
| 729 | |
|---|
| 730 | # When done, touch perlmain.c so that it doesn't get remade each time. |
|---|
| 731 | depend: makedepend |
|---|
| 732 | sh ./makedepend MAKE=$(MAKE) |
|---|
| 733 | - test -s perlmain.c && touch perlmain.c |
|---|
| 734 | cd x2p; $(MAKE) depend |
|---|
| 735 | |
|---|
| 736 | # Cannot postpone this until $firstmakefile is ready ;-) |
|---|
| 737 | makedepend: makedepend.SH config.sh |
|---|
| 738 | sh ./makedepend.SH |
|---|
| 739 | |
|---|
| 740 | # Cannot delegate rebuilding of t/perl to make to allow interlaced |
|---|
| 741 | # test and minitest |
|---|
| 742 | test-prep: miniperl perl preplibrary utilities $(dynamic_ext) $(nonxs_ext) $(TEST_PERL_DLL) |
|---|
| 743 | cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) |
|---|
| 744 | |
|---|
| 745 | # Second branch is for testing without a tty or controling terminal. |
|---|
| 746 | # See t/op/stat.t |
|---|
| 747 | test check: test-prep |
|---|
| 748 | if (true </dev/tty) >/dev/null 2>&1; then \ |
|---|
| 749 | cd t && $(LDLIBPTH) ./perl TEST </dev/tty; \ |
|---|
| 750 | else \ |
|---|
| 751 | cd t && PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) ./perl TEST; \ |
|---|
| 752 | fi |
|---|
| 753 | |
|---|
| 754 | utest ucheck: test-prep |
|---|
| 755 | if (true </dev/tty) >/dev/null 2>&1; then \ |
|---|
| 756 | cd t && $(LDLIBPTH) ./perl UTEST </dev/tty; \ |
|---|
| 757 | else \ |
|---|
| 758 | cd t && PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) ./perl UTEST; \ |
|---|
| 759 | fi |
|---|
| 760 | |
|---|
| 761 | # For testing without a tty or controling terminal. See t/op/stat.t |
|---|
| 762 | test-notty: test-prep |
|---|
| 763 | cd t && PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) ./perl TEST |
|---|
| 764 | |
|---|
| 765 | # Can't depend on lib/Config.pm because that might be where miniperl |
|---|
| 766 | # is crashing. |
|---|
| 767 | minitest: miniperl lib/re.pm |
|---|
| 768 | @echo "You may see some irrelevant test failures if you have been unable" |
|---|
| 769 | @echo "to build lib/Config.pm." |
|---|
| 770 | - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \ |
|---|
| 771 | && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t |
|---|
| 772 | |
|---|
| 773 | # Handy way to run perlbug -ok without having to install and run the |
|---|
| 774 | # installed perlbug. We don't re-run the tests here - we trust the user. |
|---|
| 775 | # Please *don't* use this unless all tests pass. |
|---|
| 776 | # If you want to report test failures, use "make nok" instead. |
|---|
| 777 | ok: utilities |
|---|
| 778 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' |
|---|
| 779 | |
|---|
| 780 | okfile: utilities |
|---|
| 781 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok |
|---|
| 782 | |
|---|
| 783 | nok: utilities |
|---|
| 784 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' |
|---|
| 785 | |
|---|
| 786 | nokfile: utilities |
|---|
| 787 | $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok |
|---|
| 788 | |
|---|
| 789 | clist: $(c) |
|---|
| 790 | echo $(c) | tr ' ' $(TRNL) >.clist |
|---|
| 791 | |
|---|
| 792 | hlist: $(h) |
|---|
| 793 | echo $(h) | tr ' ' $(TRNL) >.hlist |
|---|
| 794 | |
|---|
| 795 | shlist: $(sh) |
|---|
| 796 | echo $(sh) | tr ' ' $(TRNL) >.shlist |
|---|
| 797 | |
|---|
| 798 | pllist: $(pl) |
|---|
| 799 | echo $(pl) | tr ' ' $(TRNL) >.pllist |
|---|
| 800 | |
|---|
| 801 | Makefile: Makefile.SH ./config.sh |
|---|
| 802 | $(SHELL) Makefile.SH |
|---|
| 803 | |
|---|
| 804 | distcheck: FORCE |
|---|
| 805 | perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' |
|---|
| 806 | |
|---|
| 807 | elc: emacs/cperl-mode.elc |
|---|
| 808 | |
|---|
| 809 | emacs/cperl-mode.elc: emacs/cperl-mode.el |
|---|
| 810 | -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el |
|---|
| 811 | |
|---|
| 812 | etags: TAGS |
|---|
| 813 | |
|---|
| 814 | TAGS: emacs/cperl-mode.elc |
|---|
| 815 | sh emacs/ptags |
|---|
| 816 | |
|---|
| 817 | ctags: tags |
|---|
| 818 | |
|---|
| 819 | # Let's hope make will not go into an infinite loop on case-unsensitive systems |
|---|
| 820 | # This may also fail if . is in the head of the path, since perl will |
|---|
| 821 | # require -Ilib |
|---|
| 822 | tags: TAGS |
|---|
| 823 | perl emacs/e2ctags.pl TAGS > tags |
|---|
| 824 | |
|---|
| 825 | # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE |
|---|
| 826 | # If this runs make out of memory, delete /usr/include lines. |
|---|
| 827 | !NO!SUBS! |
|---|
| 828 | |
|---|
| 829 | $eunicefix Makefile |
|---|
| 830 | case `pwd` in |
|---|
| 831 | *SH) |
|---|
| 832 | $rm -f ../Makefile |
|---|
| 833 | $ln Makefile ../Makefile |
|---|
| 834 | ;; |
|---|
| 835 | esac |
|---|
| 836 | $rm -f $firstmakefile |
|---|
| 837 | |
|---|
| 838 | # Now do any special processing required before building. |
|---|
| 839 | |
|---|
| 840 | case "$ebcdic" in |
|---|
| 841 | $define) |
|---|
| 842 | xxx='' |
|---|
| 843 | echo "This is an EBCDIC system, checking if any parser files need regenerating." >&4 |
|---|
| 844 | case "$osname" in |
|---|
| 845 | os390|posix-bc) |
|---|
| 846 | rm -f y.tab.c y.tab.h |
|---|
| 847 | # yacc must be a reentrant ("pure") Bison in BS2000 Posix! |
|---|
| 848 | yacc -d perly.y >/dev/null 2>&1 |
|---|
| 849 | if cmp -s y.tab.c perly.c; then |
|---|
| 850 | rm -f y.tab.c |
|---|
| 851 | else |
|---|
| 852 | echo "perly.y -> perly.c" >&2 |
|---|
| 853 | mv -f y.tab.c perly.c |
|---|
| 854 | chmod u+w perly.c |
|---|
| 855 | sed -e '/^#include "perl\.h"/a\ |
|---|
| 856 | \ |
|---|
| 857 | #define yydebug PL_yydebug\ |
|---|
| 858 | #define yynerrs PL_yynerrs\ |
|---|
| 859 | #define yyerrflag PL_yyerrflag\ |
|---|
| 860 | #define yychar PL_yychar\ |
|---|
| 861 | #define yyval PL_yyval\ |
|---|
| 862 | #define yylval PL_yylval' \ |
|---|
| 863 | -e '/YYSTYPE *yyval;/D' \ |
|---|
| 864 | -e '/YYSTYPE *yylval;/D' \ |
|---|
| 865 | -e '/int yychar,/,/yynerrs;/D' \ |
|---|
| 866 | -e 's/int yydebug = 0;/yydebug = 0;/' \ |
|---|
| 867 | -e 's/[^_]realloc(/PerlMem_realloc(/g' \ |
|---|
| 868 | -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ |
|---|
| 869 | -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c |
|---|
| 870 | xxx="$xxx perly.c" |
|---|
| 871 | fi |
|---|
| 872 | if cmp -s y.tab.h perly.h; then |
|---|
| 873 | rm -f y.tab.h |
|---|
| 874 | else |
|---|
| 875 | echo "perly.y -> perly.h" >&2 |
|---|
| 876 | mv -f y.tab.h perly.h |
|---|
| 877 | xxx="$xxx perly.h" |
|---|
| 878 | fi |
|---|
| 879 | if cd x2p |
|---|
| 880 | then |
|---|
| 881 | rm -f y.tab.c y.tab.h |
|---|
| 882 | case "$osname" in |
|---|
| 883 | posix-bc) |
|---|
| 884 | # we are using two different yaccs in BS2000 Posix! |
|---|
| 885 | byacc a2p.y >/dev/null 2>&1 |
|---|
| 886 | ;; |
|---|
| 887 | *) # e.g. os390 |
|---|
| 888 | yacc a2p.y >/dev/null 2>&1 |
|---|
| 889 | ;; |
|---|
| 890 | esac |
|---|
| 891 | if cmp -s y.tab.c a2p.c |
|---|
| 892 | then |
|---|
| 893 | rm -f y.tab.c |
|---|
| 894 | else |
|---|
| 895 | echo "a2p.y -> a2p.c" >&2 |
|---|
| 896 | mv -f y.tab.c a2p.c |
|---|
| 897 | chmod u+w a2p.c |
|---|
| 898 | sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ |
|---|
| 899 | -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c |
|---|
| 900 | xxx="$xxx a2p.c" |
|---|
| 901 | fi |
|---|
| 902 | # In case somebody yacc -d:ed the a2p.y. |
|---|
| 903 | if test -f y.tab.h |
|---|
| 904 | then |
|---|
| 905 | if cmp -s y.tab.h a2p.h |
|---|
| 906 | then |
|---|
| 907 | rm -f y.tab.h |
|---|
| 908 | else |
|---|
| 909 | echo "a2p.h -> a2p.h" >&2 |
|---|
| 910 | mv -f y.tab.h a2p.h |
|---|
| 911 | xxx="$xxx a2p.h" |
|---|
| 912 | fi |
|---|
| 913 | fi |
|---|
| 914 | cd .. |
|---|
| 915 | fi |
|---|
| 916 | ;; |
|---|
| 917 | vmesa) |
|---|
| 918 | # Do nothing in VM/ESA. |
|---|
| 919 | ;; |
|---|
| 920 | *) |
|---|
| 921 | echo "'$osname' is an EBCDIC system I don't know that well." >&4 |
|---|
| 922 | ;; |
|---|
| 923 | esac |
|---|
| 924 | case "$xxx" in |
|---|
| 925 | '') echo "No parser files were regenerated. That's okay." >&2 ;; |
|---|
| 926 | esac |
|---|
| 927 | ;; |
|---|
| 928 | esac |
|---|
| 929 | |
|---|
