This is Info file gcc.info, produced by Makeinfo version 1.67 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. Published by the Free Software Foundation 59 Temple Place - Suite 330 Boston, MA 02111-1307 USA Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections entitled "GNU General Public License," "Funding for Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public License," "Funding for Free Software," and "Protect Your Freedom--Fight `Look And Feel'", and this permission notice, may be included in translations approved by the Free Software Foundation instead of in the original English.  File: gcc.info, Node: Bug Reporting, Next: Sending Patches, Prev: Bug Lists, Up: Bugs How to Report Bugs ================== The fundamental principle of reporting bugs usefully is this: *report all the facts*. If you are not sure whether to state a fact or leave it out, state it! Often people omit facts because they think they know what causes the problem and they conclude that some details don't matter. Thus, you might assume that the name of the variable you use in an example does not matter. Well, probably it doesn't, but one cannot be sure. Perhaps the bug is a stray memory reference which happens to fetch from the location where that name is stored in memory; perhaps, if the name were different, the contents of that location would fool the compiler into doing the right thing despite the bug. Play it safe and give a specific, complete example. That is the easiest thing for you to do, and the most helpful. Keep in mind that the purpose of a bug report is to enable someone to fix the bug if it is not known. It isn't very important what happens if the bug is already known. Therefore, always write your bug reports on the assumption that the bug is not known. Sometimes people give a few sketchy facts and ask, "Does this ring a bell?" This cannot help us fix a bug, so it is basically useless. We respond by asking for enough details to enable us to investigate. You might as well expedite matters by sending them to begin with. Try to make your bug report self-contained. If we have to ask you for more information, it is best if you include all the previous information in your response, as well as the information that was missing. Please report each bug in a separate message. This makes it easier for us to track which bugs have been fixed and to forward your bugs reports to the appropriate maintainer. Do not compress and encode any part of your bug report using programs such as `uuencode'. If you do so it will slow down the processing of your bug. If you must submit multiple large files, use `shar', which allows us to read your message without having to run any decompression programs. To enable someone to investigate the bug, you should include all these things: * The version of GNU CC. You can get this by running it with the `-v' option. Without this, we won't know whether there is any point in looking for the bug in the current version of GNU CC. * A complete input file that will reproduce the bug. If the bug is in the C preprocessor, send a source file and any header files that it requires. If the bug is in the compiler proper (`cc1'), run your source file through the C preprocessor by doing `gcc -E SOURCEFILE > OUTFILE', then include the contents of OUTFILE in the bug report. (When you do this, use the same `-I', `-D' or `-U' options that you used in actual compilation.) A single statement is not enough of an example. In order to compile it, it must be embedded in a complete file of compiler input; and the bug might depend on the details of how this is done. Without a real example one can compile, all anyone can do about your bug report is wish you luck. It would be futile to try to guess how to provoke the bug. For example, bugs in register allocation and reloading frequently depend on every little detail of the function they happen in. Even if the input file that fails comes from a GNU program, you should still send the complete test case. Don't ask the GNU CC maintainers to do the extra work of obtaining the program in question--they are all overworked as it is. Also, the problem may depend on what is in the header files on your system; it is unreliable for the GNU CC maintainers to try the problem with the header files available to them. By sending CPP output, you can eliminate this source of uncertainty and save us a certain percentage of wild goose chases. * The command arguments you gave GNU CC or GNU C++ to compile that example and observe the bug. For example, did you use `-O'? To guarantee you won't omit something important, list all the options. If we were to try to guess the arguments, we would probably guess wrong and then we would not encounter the bug. * The type of machine you are using, and the operating system name and version number. * The operands you gave to the `configure' command when you installed the compiler. * A complete list of any modifications you have made to the compiler source. (We don't promise to investigate the bug unless it happens in an unmodified compiler. But if you've made modifications and don't tell us, then you are sending us on a wild goose chase.) Be precise about these changes. A description in English is not enough--send a context diff for them. Adding files of your own (such as a machine description for a machine we don't support) is a modification of the compiler source. * Details of any other deviations from the standard procedure for installing GNU CC. * A description of what behavior you observe that you believe is incorrect. For example, "The compiler gets a fatal signal," or, "The assembler instruction at line 208 in the output is incorrect." Of course, if the bug is that the compiler gets a fatal signal, then one can't miss it. But if the bug is incorrect output, the maintainer might not notice unless it is glaringly wrong. None of us has time to study all the assembler code from a 50-line C program just on the chance that one instruction might be wrong. We need *you* to do this part! Even if the problem you experience is a fatal signal, you should still say so explicitly. Suppose something strange is going on, such as, your copy of the compiler is out of synch, or you have encountered a bug in the C library on your system. (This has happened!) Your copy might crash and the copy here would not. If you said to expect a crash, then when the compiler here fails to crash, we would know that the bug was not happening. If you don't say to expect a crash, then we would not know whether the bug was happening. We would not be able to draw any conclusion from our observations. If the problem is a diagnostic when compiling GNU CC with some other compiler, say whether it is a warning or an error. Often the observed symptom is incorrect output when your program is run. Sad to say, this is not enough information unless the program is short and simple. None of us has time to study a large program to figure out how it would work if compiled correctly, much less which line of it was compiled wrong. So you will have to do that. Tell us which source line it is, and what incorrect result happens when that line is executed. A person who understands the program can find this as easily as finding a bug in the program itself. * If you send examples of assembler code output from GNU CC or GNU C++, please use `-g' when you make them. The debugging information includes source line numbers which are essential for correlating the output with the input. * If you wish to mention something in the GNU CC source, refer to it by context, not by line number. The line numbers in the development sources don't match those in your sources. Your line numbers would convey no useful information to the maintainers. * Additional information from a debugger might enable someone to find a problem on a machine which he does not have available. However, you need to think when you collect this information if you want it to have any chance of being useful. For example, many people send just a backtrace, but that is never useful by itself. A simple backtrace with arguments conveys little about GNU CC because the compiler is largely data-driven; the same functions are called over and over for different RTL insns, doing different things depending on the details of the insn. Most of the arguments listed in the backtrace are useless because they are pointers to RTL list structure. The numeric values of the pointers, which the debugger prints in the backtrace, have no significance whatever; all that matters is the contents of the objects they point to (and most of the contents are other such pointers). In addition, most compiler passes consist of one or more loops that scan the RTL insn sequence. The most vital piece of information about such a loop--which insn it has reached--is usually in a local variable, not in an argument. What you need to provide in addition to a backtrace are the values of the local variables for several stack frames up. When a local variable or an argument is an RTX, first print its value and then use the GDB command `pr' to print the RTL expression that it points to. (If GDB doesn't run on your machine, use your debugger to call the function `debug_rtx' with the RTX as an argument.) In general, whenever a variable is a pointer, its value is no use without the data it points to. Here are some things that are not necessary: * A description of the envelope of the bug. Often people who encounter a bug spend a lot of time investigating which changes to the input file will make the bug go away and which changes will not affect it. This is often time consuming and not very useful, because the way we will find the bug is by running a single example under the debugger with breakpoints, not by pure deduction from a series of examples. You might as well save your time for something else. Of course, if you can find a simpler example to report *instead* of the original one, that is a convenience. Errors in the output will be easier to spot, running under the debugger will take less time, etc. Most GNU CC bugs involve just one function, so the most straightforward way to simplify an example is to delete all the function definitions except the one where the bug occurs. Those earlier in the file may be replaced by external declarations if the crucial function depends on them. (Exception: inline functions may affect compilation of functions defined later in the file.) However, simplification is not vital; if you don't want to do this, report the bug anyway and send the entire test case you used. * In particular, some people insert conditionals `#ifdef BUG' around a statement which, if removed, makes the bug not happen. These are just clutter; we won't pay any attention to them anyway. Besides, you should send us cpp output, and that can't have conditionals. * A patch for the bug. A patch for the bug is useful if it is a good one. But don't omit the necessary information, such as the test case, on the assumption that a patch is all we need. We might see problems with your patch and decide to fix the problem another way, or we might not understand it at all. Sometimes with a program as complicated as GNU CC it is very hard to construct an example that will make the program follow a certain path through the code. If you don't send the example, we won't be able to construct one, so we won't be able to verify that the bug is fixed. And if we can't understand what bug you are trying to fix, or why your patch should be an improvement, we won't install it. A test case will help us to understand. *Note Sending Patches::, for guidelines on how to make it easy for us to understand and install your patches. * A guess about what the bug is or what it depends on. Such guesses are usually wrong. Even I can't guess right about such things without first using the debugger to find the facts. * A core dump file. We have no way of examining a core dump for your type of machine unless we have an identical system--and if we do have one, we should be able to reproduce the crash ourselves.  File: gcc.info, Node: Sending Patches, Prev: Bug Reporting, Up: Bugs Sending Patches for GNU CC ========================== If you would like to write bug fixes or improvements for the GNU C compiler, that is very helpful. Send suggested fixes to the bug report mailing list, `bug-gcc@prep.ai.mit.edu'. Please follow these guidelines so we can study your patches efficiently. If you don't follow these guidelines, your information might still be useful, but using it will take extra work. Maintaining GNU C is a lot of work in the best of circumstances, and we can't keep up unless you do your best to help. * Send an explanation with your changes of what problem they fix or what improvement they bring about. For a bug fix, just include a copy of the bug report, and explain why the change fixes the bug. (Referring to a bug report is not as good as including it, because then we will have to look it up, and we have probably already deleted it if we've already fixed the bug.) * Always include a proper bug report for the problem you think you have fixed. We need to convince ourselves that the change is right before installing it. Even if it is right, we might have trouble judging it if we don't have a way to reproduce the problem. * Include all the comments that are appropriate to help people reading the source in the future understand why this change was needed. * Don't mix together changes made for different reasons. Send them *individually*. If you make two changes for separate reasons, then we might not want to install them both. We might want to install just one. If you send them all jumbled together in a single set of diffs, we have to do extra work to disentangle them--to figure out which parts of the change serve which purpose. If we don't have time for this, we might have to ignore your changes entirely. If you send each change as soon as you have written it, with its own explanation, then the two changes never get tangled up, and we can consider each one properly without any extra work to disentangle them. Ideally, each change you send should be impossible to subdivide into parts that we might want to consider separately, because each of its parts gets its motivation from the other parts. * Send each change as soon as that change is finished. Sometimes people think they are helping us by accumulating many changes to send them all together. As explained above, this is absolutely the worst thing you could do. Since you should send each change separately, you might as well send it right away. That gives us the option of installing it immediately if it is important. * Use `diff -c' to make your diffs. Diffs without context are hard for us to install reliably. More than that, they make it hard for us to study the diffs to decide whether we want to install them. Unidiff format is better than contextless diffs, but not as easy to read as `-c' format. If you have GNU diff, use `diff -cp', which shows the name of the function that each change occurs in. * Write the change log entries for your changes. We get lots of changes, and we don't have time to do all the change log writing ourselves. Read the `ChangeLog' file to see what sorts of information to put in, and to learn the style that we use. The purpose of the change log is to show people where to find what was changed. So you need to be specific about what functions you changed; in large functions, it's often helpful to indicate where within the function the change was. On the other hand, once you have shown people where to find the change, you need not explain its purpose. Thus, if you add a new function, all you need to say about it is that it is new. If you feel that the purpose needs explaining, it probably does--but the explanation will be much more useful if you put it in comments in the code. If you would like your name to appear in the header line for who made the change, send us the header line. * When you write the fix, keep in mind that we can't install a change that would break other systems. People often suggest fixing a problem by changing machine-independent files such as `toplev.c' to do something special that a particular system needs. Sometimes it is totally obvious that such changes would break GNU CC for almost all users. We can't possibly make a change like that. At best it might tell us how to write another patch that would solve the problem acceptably. Sometimes people send fixes that *might* be an improvement in general--but it is hard to be sure of this. It's hard to install such changes because we have to study them very carefully. Of course, a good explanation of the reasoning by which you concluded the change was correct can help convince us. The safest changes are changes to the configuration files for a particular machine. These are safe because they can't create new bugs on other machines. Please help us keep up with the workload by designing the patch in a form that is good to install.  File: gcc.info, Node: Service, Next: Contributing, Prev: Bugs, Up: Top How To Get Help with GNU CC *************************** If you need help installing, using or changing GNU CC, there are two ways to find it: * Send a message to a suitable network mailing list. First try `bug-gcc@prep.ai.mit.edu', and if that brings no response, try `help-gcc@prep.ai.mit.edu'. * Look in the service directory for someone who might help you for a fee. The service directory is found in the file named `SERVICE' in the GNU CC distribution.  File: gcc.info, Node: Contributing, Next: VMS, Prev: Service, Up: Top Contributing to GNU CC Development ********************************** If you would like to help pretest GNU CC releases to assure they work well, or if you would like to work on improving GNU CC, please contact the maintainers at `bug-gcc@gnu.ai.mit.edu'. A pretester should be willing to try to investigate bugs as well as report them. If you'd like to work on improvements, please ask for suggested projects or suggest your own ideas. If you have already written an improvement, please tell us about it. If you have not yet started work, it is useful to contact `bug-gcc@prep.ai.mit.edu' before you start; the maintainers may be able to suggest ways to make your extension fit in better with the rest of GNU CC and with other development plans.  File: gcc.info, Node: VMS, Next: Portability, Prev: Contributing, Up: Top Using GNU CC on VMS ******************* Here is how to use GNU CC on VMS. * Menu: * Include Files and VMS:: Where the preprocessor looks for the include files. * Global Declarations:: How to do globaldef, globalref and globalvalue with GNU CC. * VMS Misc:: Misc information.  File: gcc.info, Node: Include Files and VMS, Next: Global Declarations, Up: VMS Include Files and VMS ===================== Due to the differences between the filesystems of Unix and VMS, GNU CC attempts to translate file names in `#include' into names that VMS will understand. The basic strategy is to prepend a prefix to the specification of the include file, convert the whole filename to a VMS filename, and then try to open the file. GNU CC tries various prefixes one by one until one of them succeeds: 1. The first prefix is the `GNU_CC_INCLUDE:' logical name: this is where GNU C header files are traditionally stored. If you wish to store header files in non-standard locations, then you can assign the logical `GNU_CC_INCLUDE' to be a search list, where each element of the list is suitable for use with a rooted logical. 2. The next prefix tried is `SYS$SYSROOT:[SYSLIB.]'. This is where VAX-C header files are traditionally stored. 3. If the include file specification by itself is a valid VMS filename, the preprocessor then uses this name with no prefix in an attempt to open the include file. 4. If the file specification is not a valid VMS filename (i.e. does not contain a device or a directory specifier, and contains a `/' character), the preprocessor tries to convert it from Unix syntax to VMS syntax. Conversion works like this: the first directory name becomes a device, and the rest of the directories are converted into VMS-format directory names. For example, the name `X11/foobar.h' is translated to `X11:[000000]foobar.h' or `X11:foobar.h', whichever one can be opened. This strategy allows you to assign a logical name to point to the actual location of the header files. 5. If none of these strategies succeeds, the `#include' fails. Include directives of the form: #include foobar are a common source of incompatibility between VAX-C and GNU CC. VAX-C treats this much like a standard `#include ' directive. That is incompatible with the ANSI C behavior implemented by GNU CC: to expand the name `foobar' as a macro. Macro expansion should eventually yield one of the two standard formats for `#include': #include "FILE" #include If you have this problem, the best solution is to modify the source to convert the `#include' directives to one of the two standard forms. That will work with either compiler. If you want a quick and dirty fix, define the file names as macros with the proper expansion, like this: #define stdio This will work, as long as the name doesn't conflict with anything else in the program. Another source of incompatibility is that VAX-C assumes that: #include "foobar" is actually asking for the file `foobar.h'. GNU CC does not make this assumption, and instead takes what you ask for literally; it tries to read the file `foobar'. The best way to avoid this problem is to always specify the desired file extension in your include directives. GNU CC for VMS is distributed with a set of include files that is sufficient to compile most general purpose programs. Even though the GNU CC distribution does not contain header files to define constants and structures for some VMS system-specific functions, there is no reason why you cannot use GNU CC with any of these functions. You first may have to generate or create header files, either by using the public domain utility `UNSDL' (which can be found on a DECUS tape), or by extracting the relevant modules from one of the system macro libraries, and using an editor to construct a C header file. A `#include' file name cannot contain a DECNET node name. The preprocessor reports an I/O error if you attempt to use a node name, whether explicitly, or implicitly via a logical name.  File: gcc.info, Node: Global Declarations, Next: VMS Misc, Prev: Include Files and VMS, Up: VMS Global Declarations and VMS =========================== GNU CC does not provide the `globalref', `globaldef' and `globalvalue' keywords of VAX-C. You can get the same effect with an obscure feature of GAS, the GNU assembler. (This requires GAS version 1.39 or later.) The following macros allow you to use this feature in a fairly natural way: #ifdef __GNUC__ #define GLOBALREF(TYPE,NAME) \ TYPE NAME \ asm ("_$$PsectAttributes_GLOBALSYMBOL$$" #NAME) #define GLOBALDEF(TYPE,NAME,VALUE) \ TYPE NAME \ asm ("_$$PsectAttributes_GLOBALSYMBOL$$" #NAME) \ = VALUE #define GLOBALVALUEREF(TYPE,NAME) \ const TYPE NAME[1] \ asm ("_$$PsectAttributes_GLOBALVALUE$$" #NAME) #define GLOBALVALUEDEF(TYPE,NAME,VALUE) \ const TYPE NAME[1] \ asm ("_$$PsectAttributes_GLOBALVALUE$$" #NAME) \ = {VALUE} #else #define GLOBALREF(TYPE,NAME) \ globalref TYPE NAME #define GLOBALDEF(TYPE,NAME,VALUE) \ globaldef TYPE NAME = VALUE #define GLOBALVALUEDEF(TYPE,NAME,VALUE) \ globalvalue TYPE NAME = VALUE #define GLOBALVALUEREF(TYPE,NAME) \ globalvalue TYPE NAME #endif (The `_$$PsectAttributes_GLOBALSYMBOL' prefix at the start of the name is removed by the assembler, after it has modified the attributes of the symbol). These macros are provided in the VMS binaries distribution in a header file `GNU_HACKS.H'. An example of the usage is: GLOBALREF (int, ijk); GLOBALDEF (int, jkl, 0); The macros `GLOBALREF' and `GLOBALDEF' cannot be used straightforwardly for arrays, since there is no way to insert the array dimension into the declaration at the right place. However, you can declare an array with these macros if you first define a typedef for the array type, like this: typedef int intvector[10]; GLOBALREF (intvector, foo); Array and structure initializers will also break the macros; you can define the initializer to be a macro of its own, or you can expand the `GLOBALDEF' macro by hand. You may find a case where you wish to use the `GLOBALDEF' macro with a large array, but you are not interested in explicitly initializing each element of the array. In such cases you can use an initializer like: `{0,}', which will initialize the entire array to `0'. A shortcoming of this implementation is that a variable declared with `GLOBALVALUEREF' or `GLOBALVALUEDEF' is always an array. For example, the declaration: GLOBALVALUEREF(int, ijk); declares the variable `ijk' as an array of type `int [1]'. This is done because a globalvalue is actually a constant; its "value" is what the linker would normally consider an address. That is not how an integer value works in C, but it is how an array works. So treating the symbol as an array name gives consistent results--with the exception that the value seems to have the wrong type. *Don't try to access an element of the array.* It doesn't have any elements. The array "address" may not be the address of actual storage. The fact that the symbol is an array may lead to warnings where the variable is used. Insert type casts to avoid the warnings. Here is an example; it takes advantage of the ANSI C feature allowing macros that expand to use the same name as the macro itself. GLOBALVALUEREF (int, ss$_normal); GLOBALVALUEDEF (int, xyzzy,123); #ifdef __GNUC__ #define ss$_normal ((int) ss$_normal) #define xyzzy ((int) xyzzy) #endif Don't use `globaldef' or `globalref' with a variable whose type is an enumeration type; this is not implemented. Instead, make the variable an integer, and use a `globalvaluedef' for each of the enumeration values. An example of this would be: #ifdef __GNUC__ GLOBALDEF (int, color, 0); GLOBALVALUEDEF (int, RED, 0); GLOBALVALUEDEF (int, BLUE, 1); GLOBALVALUEDEF (int, GREEN, 3); #else enum globaldef color {RED, BLUE, GREEN = 3}; #endif  File: gcc.info, Node: VMS Misc, Prev: Global Declarations, Up: VMS Other VMS Issues ================ GNU CC automatically arranges for `main' to return 1 by default if you fail to specify an explicit return value. This will be interpreted by VMS as a status code indicating a normal successful completion. Version 1 of GNU CC did not provide this default. GNU CC on VMS works only with the GNU assembler, GAS. You need version 1.37 or later of GAS in order to produce value debugging information for the VMS debugger. Use the ordinary VMS linker with the object files produced by GAS. Under previous versions of GNU CC, the generated code would occasionally give strange results when linked to the sharable `VAXCRTL' library. Now this should work. A caveat for use of `const' global variables: the `const' modifier must be specified in every external declaration of the variable in all of the source files that use that variable. Otherwise the linker will issue warnings about conflicting attributes for the variable. Your program will still work despite the warnings, but the variable will be placed in writable storage. Although the VMS linker does distinguish between upper and lower case letters in global symbols, most VMS compilers convert all such symbols into upper case and most run-time library routines also have upper case names. To be able to reliably call such routines, GNU CC (by means of the assembler GAS) converts global symbols into upper case like other VMS compilers. However, since the usual practice in C is to distinguish case, GNU CC (via GAS) tries to preserve usual C behavior by augmenting each name that is not all lower case. This means truncating the name to at most 23 characters and then adding more characters at the end which encode the case pattern of those 23. Names which contain at least one dollar sign are an exception; they are converted directly into upper case without augmentation. Name augmentation yields bad results for programs that use precompiled libraries (such as Xlib) which were generated by another compiler. You can use the compiler option `/NOCASE_HACK' to inhibit augmentation; it makes external C functions and variables case-independent as is usual on VMS. Alternatively, you could write all references to the functions and variables in such libraries using lower case; this will work on VMS, but is not portable to other systems. The compiler option `/NAMES' also provides control over global name handling. Function and variable names are handled somewhat differently with GNU C++. The GNU C++ compiler performs "name mangling" on function names, which means that it adds information to the function name to describe the data types of the arguments that the function takes. One result of this is that the name of a function can become very long. Since the VMS linker only recognizes the first 31 characters in a name, special action is taken to ensure that each function and variable has a unique name that can be represented in 31 characters. If the name (plus a name augmentation, if required) is less than 32 characters in length, then no special action is performed. If the name is longer than 31 characters, the assembler (GAS) will generate a hash string based upon the function name, truncate the function name to 23 characters, and append the hash string to the truncated name. If the `/VERBOSE' compiler option is used, the assembler will print both the full and truncated names of each symbol that is truncated. The `/NOCASE_HACK' compiler option should not be used when you are compiling programs that use libg++. libg++ has several instances of objects (i.e. `Filebuf' and `filebuf') which become indistinguishable in a case-insensitive environment. This leads to cases where you need to inhibit augmentation selectively (if you were using libg++ and Xlib in the same program, for example). There is no special feature for doing this, but you can get the result by defining a macro for each mixed case symbol for which you wish to inhibit augmentation. The macro should expand into the lower case equivalent of itself. For example: #define StuDlyCapS studlycaps These macro definitions can be placed in a header file to minimize the number of changes to your source code.  File: gcc.info, Node: Portability, Next: Interface, Prev: VMS, Up: Top GNU CC and Portability ********************** The main goal of GNU CC was to make a good, fast compiler for machines in the class that the GNU system aims to run on: 32-bit machines that address 8-bit bytes and have several general registers. Elegance, theoretical power and simplicity are only secondary. GNU CC gets most of the information about the target machine from a machine description which gives an algebraic formula for each of the machine's instructions. This is a very clean way to describe the target. But when the compiler needs information that is difficult to express in this fashion, I have not hesitated to define an ad-hoc parameter to the machine description. The purpose of portability is to reduce the total work needed on the compiler; it was not of interest for its own sake. GNU CC does not contain machine dependent code, but it does contain code that depends on machine parameters such as endianness (whether the most significant byte has the highest or lowest address of the bytes in a word) and the availability of autoincrement addressing. In the RTL-generation pass, it is often necessary to have multiple strategies for generating code for a particular kind of syntax tree, strategies that are usable for different combinations of parameters. Often I have not tried to address all possible cases, but only the common ones or only the ones that I have encountered. As a result, a new target may require additional strategies. You will know if this happens because the compiler will call `abort'. Fortunately, the new strategies can be added in a machine-independent fashion, and will affect only the target machines that need them.  File: gcc.info, Node: Interface, Next: Passes, Prev: Portability, Up: Top Interfacing to GNU CC Output **************************** GNU CC is normally configured to use the same function calling convention normally in use on the target system. This is done with the machine-description macros described (*note Target Macros::.). However, returning of structure and union values is done differently on some target machines. As a result, functions compiled with PCC returning such types cannot be called from code compiled with GNU CC, and vice versa. This does not cause trouble often because few Unix library routines return structures or unions. GNU CC code returns structures and unions that are 1, 2, 4 or 8 bytes long in the same registers used for `int' or `double' return values. (GNU CC typically allocates variables of such types in registers also.) Structures and unions of other sizes are returned by storing them into an address passed by the caller (usually in a register). The machine-description macros `STRUCT_VALUE' and `STRUCT_INCOMING_VALUE' tell GNU CC where to pass this address. By contrast, PCC on most target machines returns structures and unions of any size by copying the data into an area of static storage, and then returning the address of that storage as if it were a pointer value. The caller must copy the data from that memory area to the place where the value is wanted. This is slower than the method used by GNU CC, and fails to be reentrant. On some target machines, such as RISC machines and the 80386, the standard system convention is to pass to the subroutine the address of where to return the value. On these machines, GNU CC has been configured to be compatible with the standard compiler, when this method is used. It may not be compatible for structures of 1, 2, 4 or 8 bytes. GNU CC uses the system's standard convention for passing arguments. On some machines, the first few arguments are passed in registers; in others, all are passed on the stack. It would be possible to use registers for argument passing on any machine, and this would probably result in a significant speedup. But the result would be complete incompatibility with code that follows the standard convention. So this change is practical only if you are switching to GNU CC as the sole C compiler for the system. We may implement register argument passing on certain machines once we have a complete GNU system so that we can compile the libraries with GNU CC. On some machines (particularly the Sparc), certain types of arguments are passed "by invisible reference". This means that the value is stored in memory, and the address of the memory location is passed to the subroutine. If you use `longjmp', beware of automatic variables. ANSI C says that automatic variables that are not declared `volatile' have undefined values after a `longjmp'. And this is all GNU CC promises to do, because it is very difficult to restore register variables correctly, and one of GNU CC's features is that it can put variables in registers without your asking it to. If you want a variable to be unaltered by `longjmp', and you don't want to write `volatile' because old C compilers don't accept it, just take the address of the variable. If a variable's address is ever taken, even if just to compute it and ignore it, then the variable cannot go in a register: { int careful; &careful; ... } Code compiled with GNU CC may call certain library routines. Most of them handle arithmetic for which there are no instructions. This includes multiply and divide on some machines, and floating point operations on any machine for which floating point support is disabled with `-msoft-float'. Some standard parts of the C library, such as `bcopy' or `memcpy', are also called automatically. The usual function call interface is used for calling the library routines. These library routines should be defined in the library `libgcc.a', which GNU CC automatically searches whenever it links a program. On machines that have multiply and divide instructions, if hardware floating point is in use, normally `libgcc.a' is not needed, but it is searched just in case. Each arithmetic function is defined in `libgcc1.c' to use the corresponding C arithmetic operator. As long as the file is compiled with another C compiler, which supports all the C arithmetic operators, this file will work portably. However, `libgcc1.c' does not work if compiled with GNU CC, because each arithmetic function would compile into a call to itself!